Home of CBR600

[Sn0w_MaN]

boring boring boring...

Edited March 17, 2011 by Sn0w_MaN

[koxie]

Hmm mine with stock light on (right) voltage is 13.9. On the go can reach 14.2. As long as its between 13.2-14.2, i guess its alright.

 

hmm i on high beam with HID kit,my voltage ard 13.8 when on the go.so it normal right?

[koxie]

damn,maybe just nice when i off the kill switch the temp drop by 103.cause everytime i stop,then temp is alway below 103.until now i nv see more then 103.

[Sn0w_MaN]

well koxie... high temp not really have to do with ur light and etc... it cause be due to the coolant and etc.. if u still encounter high temp easily than go service ur bike and flush the coolant and add on engine ice (although i personally feel that it doesnt help much). This will help u to maintain ur temp on normal riding / abit of slow traffic at abt 85-100. After ur have service it usually this temp will last u for abt average 3-6mths. This is what i encounter and personally expreience.

[nur90]

hmm i on high beam with HID kit,my voltage ard 13.8 when on the go.so it normal right?

 

ur bike very healthy liao. =)

[koxie]

well koxie... high temp not really have to do with ur light and etc... it cause be due to the coolant and etc.. if u still encounter high temp easily than go service ur bike and flush the coolant and add on engine ice (although i personally feel that it doesnt help much). This will help u to maintain ur temp on normal riding / abit of slow traffic at abt 85-100. After ur have service it usually this temp will last u for abt average 3-6mths. This is what i encounter and personally expreience.

 

alright =) but i think my bike dont really heat up.the main issue is that i hit the kill switch my rad fan also off.

[sindefectos]

I win!!!! 2061 km and going :cheeky:

 

Hahah! Mine reach 2100+ already. Went to Woodlands and back. Btw, you servicing when reach 3000km right?

 

boring boring boring...

 

Me too. Kept raining and raining. I hate those drizzling type. Would rather ride in real heavy rain. Worth wearing my raincoat.

[nur90]

alright =) but i think my bike dont really heat up.the main issue is that i hit the kill switch my rad fan also off.

 

haha wads kill switch btw? =/

[ahduck]

haha wads kill switch btw? =/

 

its the red colour start/ run button switch beside the throttle.

[koxie]

but is it true that if u everytime use the kill switch it will harm the ECU/EFI

[nur90]

its the red colour start/ run button switch beside the throttle.

 

ohh.... hahas..

[nur90]

but is it true that if u everytime use the kill switch it will harm the ECU/EFI

 

hmmmm..... i guess so. why eh ..

[Amsterdam_Virus]

if only the termis look as good as the rcv.

 

the tip will be sticking out circled in red if the cover or fender is removed.

if the tip and the end can diameter is abt the same something like the shape of arrow gp still wont look so weird. too bad

http://img853.imageshack.us/img853/7774/07080920102011hondacbr6.jpg

 

compare yoshi n termis,the diff is that termis is more louder then yoshi or other pipes right? that it? but for outlook u guys prefer other pipes compare to termis? im using yoshi now for my 07 cbr..but looking into getting a more louder pipe..legally that is

[Dafanshu]

Hahah! Mine reach 2100+ already. Went to Woodlands and back. Btw, you servicing when reach 3000km right?

 

Nope. I will service when it hits 4000 KM... heading to BS to service.

[Dafanshu]

Mine too. Unless you switch off the engine. Anw, I went to bikeshop yesterday asking for a switch for headlight. But the guy said it is not advisable cause the bike is build such a way that the headlight must be switched on all the time. Any opinions?

 

i fixed a switch too. Will only on my headlight after I hit the expressway (daytime)

my personal theory that will prolong the life of battery hehehe

[ahduck]

but is it true that if u everytime use the kill switch it will harm the ECU/EFI

 

the kill switch wont effect any electric components. its there just to cut off power to the ignition coils if should there be an emergency.

 

compare yoshi n termis,the diff is that termis is more louder then yoshi or other pipes right? that it? but for outlook u guys prefer other pipes compare to termis? im using yoshi now for my 07 cbr..but looking into getting a more louder pipe..legally that is

 

get the 1 u like most.

[daojeff]

actually i have a question.

 

Is it possible to use right side as HID and left side as normal blub controlled by a switch?

Any1 done this or heard this be4?

[koxie]

actually i have a question.

 

Is it possible to use right side as HID and left side as normal blub controlled by a switch?

Any1 done this or heard this be4?

 

ya,it can be done.since our is using H7 bulb.meaning the bulb itself no high/low function like those H4.u can put either left or right or both eye HID.

[xiaofire]

wao ppl.. so unlucky of me.. my muffler got stolen!!

[sindefectos]

wao ppl.. so unlucky of me.. my muffler got stolen!!

 

Damn those thieves. When did it happen? Where??

[ahduck]

actually i have a question.

 

Is it possible to use right side as HID and left side as normal blub controlled by a switch?

Any1 done this or heard this be4?

 

Dunno whether ur 05 has the same headlight layout as 07 and above. But anyway heres my POV.

I wont advise this cos the reflective mirror in the structure of both the headlight housing is different. 1 is meant of low beam another is meant for high. So if u were change sides, the light throw will be different or not focus. Besides if u were to put HID in reflective mirror housing, it will cos unwanted glares to other road users. But if u were to insist using HIDs, get ur headlight modded to fit in the projector lens to optimise the light throw/ focus. And of cos not forgetting theres a 1k fine for retrofitting HIDs unless approved by LTA.

Another thing is HID needs time to start up. So u will lose the 'flicker' passing light high beam function.

 

wao ppl.. so unlucky of me.. my muffler got stolen!!

 

Muffler? omg u mean they stolen the whole end can? I tot it just the silencer.

[koxie]

eh the whole slip on got stolen??

[koxie]

Am selling an CF front mudguard and tail tidy for 07/08 model.More detail can be found here: http://www.singaporebikes.com/forums/showthread.php/317854-WTS-Misc-for-CBR-600?p=6998955#post6998955

[Insomni4]

ya,it can be done.since our is using H7 bulb.meaning the bulb itself no high/low function like those H4.u can put either left or right or both eye HID.

 

hey bro, regarding this h7 bulb is the correct one for cbr '11 as based on http://powersports.honda.com/2011/cbr600rr/innovations.aspx right? will be getting one but scare buy wrong..

[BadutBoy]

Any1 encounter this b4,when u hold your E start to start the bike.the bike dint crank continous.like half half.

 

batt nearly flat