[sold] wts>cbr400rrr fireblade fq batch, 31july2018

[guangwei]

FQ batch (The last 2 batch just before the final batch FR, hence one of the newest around properly)

New Yoshi Stainless steel Pipe bought last year july with cert. ($800 + roughly $100 inspection fee) comes with receipt and cert, save you alot if you are planning to buy a new pipe

GPR throttle grip

New rectifier

Motul v300 (Early october 2014)

Iridium spark plug x4 (Mid august 2014)

Washed air filter, carburetor(Mid august 2014)

New paintwork(stocked 1993 fireblade model paintwork with white and silver coating) (painted january 2014))

No flaws in engine (From servicing mechanic)

new magnetic coil (january 2014)

Bike had never touch the ground (except the wheels) ever since under my care.

All non-mentioned parts are stock

New IU

stock r model header

New stock chain & sprocket (Mid august 2014)

Tyre pressure setting: front 32psi, rear 34 psi.

shell vpower fed, with occasion esso 8000 if i cant find shell station

Bike serviced at bikeworkz

 

 

This is perhaps one of the most reliable transport bike among its kind. I travel from home(boon lay) to and from work(yishun) every monday to friday. The bike clicked 45miles on average daily with no problems for the past 10months (ever since the old rectifier was worn out during 2014 new year).

 

The bike millage is also one of the lowest for its kind, at only 39000. As it was severely under utilised by previous owner due to circumstances, reason wise explainable for interested parties. most properly can never ever find another fireblade with lower millage.

 

Edit: noticed a lot of people viewers like to ask about the bike parts availability. Bike parts availability is actually not as bad as most of you guys think. A lot of super4, rvf, cbr600 and other cbr400 parts can be shared.

 

I did not race with the bike before. The bike power is definitely there IMO, 0-90km/h in a few seconds, easily panic most unprepared pillions with half throttle and clears meter without problem.

Class 2 commences on 16october. must sell to begin saving for class 2. my loss your gain.

RESERVED HENCE CONSIDERED SOLD

Asking price: 3600. (Exhaust pipe cost me $800 alone),

bike reserved until further notice. (might be selling to friend)

 

feel free to sms/whatsapp to check for updates but no more viewers as of now

 

 

will also give away my previous unapproved stainless steal header to new owner. (as the header built is dam low, the lower part of the header have some dents as i often hit the bump when going thru bike with header, u can however still go through most bump by traveling at extremely low speed)

more images and video coming up

 

thanks

 

http://www.singaporebikes.com/temp/ubikes/used_big/68270_385334892.JPG

http://www.singaporebikes.com/temp/ubikes/used_big/68268_679462635.jpg

Edited October 17, 2014 by guangwei

[guangwei]

Bump

 

 

Sent from my iPhone using Tapatalk

[guangwei]

bump for the night

[guangwei]

bump for the evening

[guangwei]

...............

Edited October 17, 2014 by guangwei

[guangwei]

bumppppppp

[guangwei]

bump for night

[IWant2Smile]

Can view the bike?

[guangwei]

Can view the bike?

 

have to wait till this coming saturday at least for updates

[guangwei]

Bike reserved