Jump to content
SingaporeBikes.com Telegram Now LIVE! Join NOW for the Last Reviews, News, Promotions & Offers in Singapore! ×

  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website for FREE such as:

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

[Discussion] Typical prices for Phantom repairs & mods

thatone1

By thatone1
in Cruisers

 Share

Recommended Posts

mepkoh Newbie

mepkoh

Posted
Posted
didn't I reply already...

 

 

 

 

 

I got the chain oiler at about the 23000km mark...

 

but still... at 25000km, chain sprockets, clutch plates, tyres all must go! safety first... :cheer:

 

as you will be vigorously oiling it with the oiler...maybe u dont need to change it for along time..should i say a long long ride...:cheers:

Never argue with an idiot. They'll bring you down to their level and beat you with experience every time:dot:

  • Replies 3.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

lycan Newbie

lycan

Posted
Posted
didn't I reply already...

 

 

 

 

 

I got the chain oiler at about the 23000km mark...

 

but still... at 25000km, chain sprockets, clutch plates, tyres all must go! safety first... :cheer:

erm... i got the chain and BACK sprocket at 130-40.. at planet.

 

since when they throw in FRONT sprocket?

DIY instructions

VTEC indicator for CB400 - http://tinyurl.com/7gvy3vy

Replacement/Changing of T10 light bulbs for CB400's Meter - http://tinyurl.com/8624wsa

 

:bouncefire:

2006 Aprilia RS125(Sold)

2006 Honda Phantom TA200(Sold)

1999 Honda Super 4 Hyper VTEC(Sold)

2003 Honda ST1300A Pan European(Sold) :thumb:

2010 Kia Cerato Forte Koup(Current)

VidaK Newbie

VidaK

Posted
Posted
erm... i got the chain and BACK sprocket at 130-40.. at planet.

 

since when they throw in FRONT sprocket?

 

planet would always change the chain, front and rear sprocket together since it comes as a set...

 

are you sure that they didn't change your front sprocket...?

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg
lycan Newbie

lycan

Posted
Posted
planet would always change the chain, front and rear sprocket together since it comes as a set...

 

are you sure that they didn't change your front sprocket...?

i am sure! the mech only replace my back sprocket..

DIY instructions

VTEC indicator for CB400 - http://tinyurl.com/7gvy3vy

Replacement/Changing of T10 light bulbs for CB400's Meter - http://tinyurl.com/8624wsa

 

:bouncefire:

2006 Aprilia RS125(Sold)

2006 Honda Phantom TA200(Sold)

1999 Honda Super 4 Hyper VTEC(Sold)

2003 Honda ST1300A Pan European(Sold) :thumb:

2010 Kia Cerato Forte Koup(Current)

VidaK Newbie

VidaK

Posted
Posted
i am sure! the mech only replace my back sprocket..

 

thats like so weird... why don't you open your front sprocket cover and see if your sprocket is new...

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg
jeffrey83 Newbie

jeffrey83

Posted
Posted
gear oil seal...???

 

you meant front fork seal?

 

or engine gasket...?

 

 

 

not the fork....

 

is the engine gasket ba... its near the engine there... ROUND in shape...

5 Oct 2005 - Jun 2007(SP) FS6059X

18 Jun 2007 - 26 Nov 2007 -> CBR400, L model problematic FJ532*S

 

26 Nov 2007 - 12 Nov 2011 -> TA200, FV2X2G

12 Nov 2011 - 12 Nov 2012 -> SYM GTS200, FZ99*0D

 

29 Nov 2012 - 13 July 2015 -> KIA Rio HB 1.4M, SFY*

13 Jul 2015 - 28 Apr 2018 -> Kia Cerato V2 SKT*

 

28 Apr 2018 till current -> Hyundai Elentra S_trim SLZ*

VidaK Newbie

VidaK

Posted
Posted
not the fork....

 

is the engine gasket ba... its near the engine there... ROUND in shape...

 

hmmm... it varies... but shouldn't be too expensive... you should let ah chong have a look... just in case...

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg
lycan Newbie

lycan

Posted
Posted
thats like so weird... why don't you open your front sprocket cover and see if your sprocket is new...

its not... :(

DIY instructions

VTEC indicator for CB400 - http://tinyurl.com/7gvy3vy

Replacement/Changing of T10 light bulbs for CB400's Meter - http://tinyurl.com/8624wsa

 

:bouncefire:

2006 Aprilia RS125(Sold)

2006 Honda Phantom TA200(Sold)

1999 Honda Super 4 Hyper VTEC(Sold)

2003 Honda ST1300A Pan European(Sold) :thumb:

2010 Kia Cerato Forte Koup(Current)

pureice68 Newbie

pureice68

Posted
Posted

Hi bros, can anyone help advise whether Phantom TA150 and TA200's parts are the same? Example like the chrome covers, mudguards, fuel tanks, etc... Tot of getting from vtec88 which he just posted. Cheers!

Don't do it to others what you don't want others to do to you! God bless! :cheers:

VidaK Newbie

VidaK

Posted
Posted
its not... :(

 

hmmm... unless we see your sprocket ourselves... I can't comment anymore...

 

Hi bros, can anyone help advise whether Phantom TA150 and TA200's parts are the same? Example like the chrome covers, mudguards, fuel tanks, etc... Tot of getting from vtec88 which he just posted. Cheers!

 

no, some parts are not interchangable. the chrome covers will not necessarily fit, especially the right rear cover since the TA200 carburetor's air intake hose is too wide to fit a TA150's cover...

 

:cheers:

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg
pureice68 Newbie

pureice68

Posted
Posted
no, some parts are not interchangable. the chrome covers will not necessarily fit, especially the right rear cover since the TA200 carburetor's air intake hose is too wide to fit a TA150's cover...

 

:cheers:

 

Thanks Vidak. The previous owner had probably dropped the bike and the right chrome cover was cracked! I didn't take notice during purchase but as I wash it the other day, the chrome start peeling. Anyway, will slowly change & mod it but must meet up with you bros for recommendation. Till then, cheers!

Don't do it to others what you don't want others to do to you! God bless! :cheers:

VidaK Newbie

VidaK

Posted
Posted
Will anyone be so kind to advise me on how to get to Planet from CCK?? Trying to get there for some checkup on my bike.....

 

From CCK:

 

KJE >>> BKE >>> PIE >>> exit Paya Lebar >>> refer to the map below

 

http://photos.friendster.com/photos/78/20/5760287/2_991007228l.jpg

 

:cheers:

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg
lycan Newbie

lycan

Posted
Posted
hmmm... unless we see your sprocket ourselves... I can't comment anymore...

 

 

 

no, some parts are not interchangable. the chrome covers will not necessarily fit, especially the right rear cover since the TA200 carburetor's air intake hose is too wide to fit a TA150's cover...

 

:cheers:

o.o.. i'll try to take a picture..

 

soo if lets say my sprocket wasnt replaced. what can i do. :(

DIY instructions

VTEC indicator for CB400 - http://tinyurl.com/7gvy3vy

Replacement/Changing of T10 light bulbs for CB400's Meter - http://tinyurl.com/8624wsa

 

:bouncefire:

2006 Aprilia RS125(Sold)

2006 Honda Phantom TA200(Sold)

1999 Honda Super 4 Hyper VTEC(Sold)

2003 Honda ST1300A Pan European(Sold) :thumb:

2010 Kia Cerato Forte Koup(Current)

rylche Newbie

rylche

Posted
Posted

I just got myself a new Phantom (FW plate). Should I send it to Planet for a full servicing; i.e ask them to check if got any problems and for tuning of the carb also?

Class 2B

FW TA200

 

Safety above all

VidaK Newbie

VidaK

Posted
Posted
I just got myself a new Phantom (FW plate). Should I send it to Planet for a full servicing; i.e ask them to check if got any problems and for tuning of the carb also?

 

hihi... welcome!

 

yes, the easiest way to start enjoying your bike is by letting ah chong of planet to ride your bike! he will list down all the necessary replacement for wear and tear parts and point out potentially dangerous elements of your bike that need immediate attention... :smile:

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg
kmjoe Newbie

kmjoe

Posted
Posted

Repairs / Maintenance :

 

* Fuel Sensor $40 (Planet)custom 4 & above

* Battery $26Yuasa/$38(plug and play) (LAB) / $35 (Planet) / $48 (Ah Koon)/ $60 woodlands road carltex (7Ah battery)

* Steering cone $55-65

* Chain Tensioner $55-60 (for tick tick sound at cold start)

* Front brake disc $45

* Tyres (metz) $150 front & back

* Chain $70-120 depending on type

* Chain + Sprocket - $140+/-

* DID O RING with Original Honda Sprocket - $130 (planet)

* Signal lights - depending on which type you like. $8-25.

* Signal bulb, headlight bulb - 1 $ (LAB, easy DIY) (add on: approved brighter ones for $8. bought from koon.)

* Speedo BackLight + Workmanship (Planet) - S$2

* Headlight - anywhere from $35 to 90 depending the type you like.

* Spark plug - $2-20 [[ Replay once had his changed for S$2 ]]

* Engine oil - $6 -18 (jB got his lousiest EO for $3)

* Brake Pad $15-25

* Bleed and change brake fluid($10 each side)

* Air filter - $10

* Wheel ball bearings - $20-35 (depends on how mech chop u) jtzx: change for only $5 at planet

* Gear Shaft - $100 (planet)

* Clutch plate - $80 (Planet)

* Front fork (1 pair) - $330 (planet)

* Front fork seals (plus fork oil of course) - $65 (planet)

* Front fork tube (1 x) - $30 (planet)

* Rectifier - $75 (planet)

* Coil - $180 (planet)

* Rethreading of spark plug thread - between $35 - $45.

* Gasket - $30 (koon)

* Starter carbon - $60 (planet)

* Front fender - $45 (original honda) ($28 at ah boy, DIY 4 screws only)

* Rear brake plate w/ pad $58 (planet)

* Rear brake disc - $80 (planet)

* Original rear suspension $180 (planet)

* Repair front brake pump (jam) and replace brake oil -$25 - (planet)

* Replace entire front brake pump ($80) - (planet)

* Rear Brake Pump ($85) (planet)

* Overhaul: Piston+Ring+Block+Top gasket+EO+Plug - ($380) - (planet)

* Rear brake light 12 v 5w/18w $1 (planet)

* Clutch cable - $15 (planet)

* Throttle cable - $12 (planet)

* Front Brake/Clutch Lever - $8 each(planet)

* Balancer [the 2 silver thingies at the edge of your handlebars] - $15 (planet)

* Front fender -$45 (AMK HL motors)

* Spark plug cap - $18 (planet)

* regina gold chain, front & rear honda sprockets with installation at ah boy- $120

 

Mods and Accessories:

* Respray of bike, (front/rear mudguard + Tank) single color - $180 (H L Cycle)

* Wide handlebar (custom4 phantom type) - $38

* Wide Crashbar with mounting points for spotlights - $80

* Footrest - $65-85

- Front\Rubber part - $5/piece @LAB

- Front\Metal base plate - $11/piece @LAB

- Rear\Eagle footrest - $25/pair @ LAB (just bought today, now is $30)

* Side box e21 - $90-130

* Fuel tank - $382 contact madman or check http://www.pinkphantom.com/estore06.html

* Spotlights $35 a pair http://www.pinkphantom.com/estore11a.html

* Windshield $65-80

* Grips $10-120

* Chrome w/ rubber strips grips (LAB) - $25

* Mirrors $12(LAB) - $50 (jB got his, 8 bucks for small ones)

* Look-alike-original mirrors (shop beside LAB) - $20, LAB should be cheaper.

* Saddlebags $110-180

* Hazard light less than $10 if u fix&wire urself, $18-20 for mech installation [[ S$15 if Replay does it for you! ]]

* Relocating rear signals to license plate - $10 (planet)

* Relocating rear signals to license plate with bracket - $28 (LAB)

* Rear box $80-330

* Voltage stabiliser - $59-$120 depends

* Rider's ORIGINAL footrest (LAB) - S$18 per side, can be cheaper?

* Stainless steel screws for speedo, and side covers. 6 to change altogether. $1-$1.80 also bought from koon.

++ washers to go at 50c each at regina

* Socket for supporting the head light - $15

* Bullet Headlight - $35 (LAB)

* Gear lever with rubber $20 at koon

* Chrome gear levers (shadow type) $35 at koon

* Stebel Magnum 2 (Silver) w/o installation - $18-$20 (LAB)

* Daiso electric horns (pair) - $45 (planet)

* Phantom TA 200 gearbox - $540 (planet)

* Front fender the "mudflap"- $20 at koon

* Stebel Electric horn with nice hidden installation under front chrome cover- at koon $38

* Re-wrap seat- Starts from about $38 from Eugene saddledry

* Spotlights on crashbar with installation- $35 at koon

* Crashbar- $65 from ah boy DIY

 

Tow Services & Send for Inspection:

 

* Towing (to and fro) - $40 (Planet)

* Send for inspection - $60 (Planet)

__________________

jtzx Newbie

jtzx

Posted
Posted

6pm close if i'm not wrong..

JOSHUA

class2B -26/2/09

class 2A -27/7/10

class 3 - 6/1/11

class 2 - 30/8/12

 

http://i920.photobucket.com/albums/ad44/jtzx/Image0020_JROT42b4_edited.gif?t=1246004022

lycan Newbie

lycan

Posted
Posted

last night manage to catch him before he closes.

 

my chain tensioner decides to give up.

 

cost me $65 bucks.

DIY instructions

VTEC indicator for CB400 - http://tinyurl.com/7gvy3vy

Replacement/Changing of T10 light bulbs for CB400's Meter - http://tinyurl.com/8624wsa

 

:bouncefire:

2006 Aprilia RS125(Sold)

2006 Honda Phantom TA200(Sold)

1999 Honda Super 4 Hyper VTEC(Sold)

2003 Honda ST1300A Pan European(Sold) :thumb:

2010 Kia Cerato Forte Koup(Current)

lycan Newbie

lycan

Posted
Posted
lol poor guy... btw ah chong is the uncle who looks like he need bejing 101 isit?

eh. dont make fun of him lei.

 

he is a very knowledgeable man..

 

respect him.

 

He even explain how a tensioner work when i never ask him about it.

 

none of the bike shop will do that at least for where i have gone to.

DIY instructions

VTEC indicator for CB400 - http://tinyurl.com/7gvy3vy

Replacement/Changing of T10 light bulbs for CB400's Meter - http://tinyurl.com/8624wsa

 

:bouncefire:

2006 Aprilia RS125(Sold)

2006 Honda Phantom TA200(Sold)

1999 Honda Super 4 Hyper VTEC(Sold)

2003 Honda ST1300A Pan European(Sold) :thumb:

2010 Kia Cerato Forte Koup(Current)

jtzx Newbie

jtzx

Posted
Posted
lol poor guy... btw ah chong is the uncle who looks like he need bejing 101 isit?

 

eh. dont make fun of him lei.

 

he is a very knowledgeable man..

 

respect him.

 

He even explain how a tensioner work when i never ask him about it.

 

none of the bike shop will do that at least for where i have gone to.

 

lol... each time i drop by planet i learn something.. cause i always ask him Qustions =)

JOSHUA

class2B -26/2/09

class 2A -27/7/10

class 3 - 6/1/11

class 2 - 30/8/12

 

http://i920.photobucket.com/albums/ad44/jtzx/Image0020_JROT42b4_edited.gif?t=1246004022

VidaK Newbie

VidaK

Posted
Posted
lol poor guy... btw ah chong is the uncle who looks like he need bejing 101 isit?

 

eh. dont make fun of him lei.

 

he is a very knowledgeable man..

 

respect him.

 

He even explain how a tensioner work when i never ask him about it.

 

none of the bike shop will do that at least for where i have gone to.

 

chill... he meant no disrespect... :smile:

http://photos.friendster.com/photos/78/20/5760287/2_900727903l.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • DAIS_ShellBAU2024_Motorcycle_SingaporeBikesBanner_300x250.jpg

     
×
×
  • Create New...