daelim daystar corner ?

[kakarow]

Hmm,

 

Sometime for daystar might have this problem due the weight of the bike & also the road condition

 

anybody experiencing this weird thing which i have?

ive been travelling at 100 - 120. thats what shows on my speedometer but i believe its rather slow. any reasons why?

[amsyar]

again -.-

 

For your speedo. Cos it's a 2B bike. The speedo isn't as accurate as compared to a 2B, class 2, a car or a GPS. If you're doing 100-120 you'll prob be doing only about 80-100km/h. On my class 2 bike. When I'm doing 160km/h, the GPS reads as 150km/h. So don't worry, it's not you, it's inaccurate readings of instruments

 

Nowander it felt slow eventhough it shows 130 or so... hmm..

Btw, isit possible for Daystar to have electronic speedometer??

Sounds cool but possible??

[kobesingh]

check with roy. he should knw.

[kobesingh]

nbw is here! anyone headin down tonight? will b wit my gal at nbw..

[armofpeace]

By the way Daystar Bros, if you want to join in the metric cruiser convoy to the National Bike Week event venue, we'll be meeting up at the open carpark of Newton Hawker Centre at 3.30pm Saturday 29/12/08...Do sms me at 9384 8120 so that i know you are joining in...Cheers and hope to see you all...

[amsyar]

Maybe i should start typing something

Is it possible i change from 5 to 6speed gear???

anyone!!!

[armofpeace]

Hey hey to all Daystar Bros...If you all are free on this coming 28th December, do join in the wedding convoy of one of our forum member FINROD...to sign up, please go into the "UPCOMING RIDES AND OUTINGS" under the title thread, "28/12/08 Wedding Convoy - FINROD Wedding".... Hope to have all of your participation ya... Cheers...

[kobesingh]

wats the fuel ratio are u getting? in terms of km/l....

[nights]

Nowander it felt slow eventhough it shows 130 or so... hmm..

Btw, isit possible for Daystar to have electronic speedometer??

Sounds cool but possible??

 

Digital speedometer I assume you are enquiring? Yes. It is possible by re-wiring up to another aftermarket digital speedometer.

[nights]

Maybe i should start typing something

Is it possible i change from 5 to 6speed gear???

anyone!!!

 

Yes. It is possible but is it necessary? You will chunk up unnecessary cost if you intend to upgrade your motorcycle later because it is not simply just adding the sixth gear but the whole set of existing gears.

[kobesingh]

respraying the whole bike cost $400 at cka... any other better options nights?

[armofpeace]

That's professionally done but if you want to spray it on your own you can, but it's a more rugged look than the shiny look lah....But it's all up to you own liking...Some riders like to have the matt look, some like the glossy look...If you are more into the clean glossy professional showroom look, it's wise to get it done professionally...But if you are more into the rugged look, you can just buy can sprays and spray it with the matt look...Good luck in your decisions bro...Cheers...

[kobesingh]

That's professionally done but if you want to spray it on your own you can, but it's a more rugged look than the shiny look lah....But it's all up to you own liking...Some riders like to have the matt look, some like the glossy look...If you are more into the clean glossy professional showroom look, it's wise to get it done professionally...But if you are more into the rugged look, you can just buy can sprays and spray it with the matt look...Good luck in your decisions bro...Cheers...

 

thanks bro.. any recommendation of places for sprayin other then cka?

[nights]

respraying the whole bike cost $400 at cka... any other better options nights?

 

There is an affordable spray painting shop in Kallang Industrial along the same lane as with Future Scootering, Tai Hin and Lim Ah Boy workshop. You may want to get a quotation from them.

 

Good luck!

[TheYasMan]

Gang...

 

Do support the Cruisers/Bobbers Wedding Convoy for our bro Finrod, 28th Dec (Sunday), by including your name in the list in THIS THREAD!

[kakarow]

Yo Bro,

 

Where's the meeting place & we should we do ??

 

 

Gang...

 

Do support the Cruisers/Bobbers Wedding Convoy for our bro Finrod, 28th Dec (Sunday), by including your name in the list in THIS THREAD!

[TheYasMan]

Yo Bro,

 

Where's the meeting place & we should we do ??

 

Yo, thanks for the interest.

Just slap your name in first if you're keen to join up.

Further details like time and place will be updated to participants via SMS. Tentatively, we're meeting at Kallang's Big Splash before we roar off.

 

In case you don't understand what's going to happen, like i mentioned in that thread: The main thing is to convoy out to lead the wedding vehicle from one place to another.

 

Apart from that, meet new and old friends, admire other people's amazing bikes, explore wedding cultures, eat free food, take pics, be in pics, have fun, see nice daughters of makciks, increase your passion for riding, etc.

 

Let's go!

[kobesingh]

There is an affordable spray painting shop in Kallang Industrial along the same lane as with Future Scootering, Tai Hin and Lim Ah Boy workshop. You may want to get a quotation from them.

 

Good luck!

 

thanks bro!

[kakarow]

Yo Bro,

 

I don't understanding why do u need to change i have own my daystar for about coming to 4years till now i'm still very happy with the performance ?????

 

 

Maybe i should start typing something

Is it possible i change from 5 to 6speed gear???

anyone!!!

[armofpeace]

Hey there Daystar Bros...Those of you who participated in FINROD's wedding, i do hope that you enjoyed yourselves and had a good ride that day...The videos are out so do check it out ya bros...

 

By the way, there'll be another wedding convoy this coming 1st of February and it would great to have your support as well as more of the other Daystar bros...Cheers and do look up for this convoy ya...

[ericli08]

Hi to all daystar seniors, I just bought a 2nd hand daystar and been riding it for about 1 month. question is when i open the throttle to about 7k rpm, there's a rattling metal sound coming from the front of the bike, checked with the mechanic from CKA and they say it's ok. Any of u experience this?? The mechanic say it's ok to go until 8k rpm, is it true??? I scared the engine will damage. Please advise.

[plasticblackspecs]

Don't sound right. Get a 2nd opinion? Can try Rosli at Eunos Industrial. Could it be something loose?

[ericli08]

Ya, that's what the mechanic say also, but he can't figure out what is loose. funny..

 

anyway so is it ok to rev till 8k rpm on normal riding?? coz i normally ride at 6.5k and after that i feel like the engine like very hot. I know I might be a bit kayu type. hehe..

[kakarow]

ha ha ha i have own it for about 4year for my rpm after first gear i can go till 11rpm no worries

 

 

Hi to all daystar seniors, I just bought a 2nd hand daystar and been riding it for about 1 month. question is when i open the throttle to about 7k rpm, there's a rattling metal sound coming from the front of the bike, checked with the mechanic from CKA and they say it's ok. Any of u experience this?? The mechanic say it's ok to go until 8k rpm, is it true??? I scared the engine will damage. Please advise.

[kakarow]

bro,

just to check where you brought it from ??

 

Ya, that's what the mechanic say also, but he can't figure out what is loose. funny..

 

anyway so is it ok to rev till 8k rpm on normal riding?? coz i normally ride at 6.5k and after that i feel like the engine like very hot. I know I might be a bit kayu type. hehe..