Yamaha YZF-R6

[Rom]

so below 130 is fine?

hmm

 

also i lost my valve tire cap, can i replace it at any kiosk? cost how much? are they universe standard

 

Got mine free from the shop during my SP days but plastic ones ah. Should be universal.

[Blueblood]

bro, but i believe 112-113 degree Celsius should still be in the tolerable range right? nvr see any warning lights

 

u shouldn't be seeing those temp. fan cut in at 101 deg. unless u switch off e bike n on back again. check ur radiator cap.

[guangwei]

u shouldn't be seeing those temp. fan cut in at 101 deg. unless u switch off e bike n on back again. check ur radiator cap.

 

Yes my fan does turn on at 100 degree. It still continue to rise after the fan is on all the way to 112 :/

 

 

Sent from my iPhone using Tapatalk

[Blueblood]

Yes my fan does turn on at 100 degree. It still continue to rise after the fan is on all the way to 112 :/

 

 

Sent from my iPhone using Tapatalk

 

tts not normal. maybe like rom said, could be ur thermostat, check ur rad condition, ur rad cap,make sure it tight.

[guangwei]

tts not normal. maybe like rom said, could be ur thermostat, check ur rad condition, ur rad cap,make sure it tight.

 

I check the cap like 5 times coolant near brim level too /:

 

 

Sent from my iPhone using Tapatalk

[Blueblood]

I check the cap like 5 times coolant near brim level too /:

 

 

Sent from my iPhone using Tapatalk

 

u flush e coolant urself? rad cap has a delicated pressure setting that will pop open when e pressure is reach n u will see e coolant reservoir level increase. if e cap doesn't close up after opening, it wont hold pressure, temp might increase too. but in ur case seems more like air lock inside e cooling system. engine ice is one of e best coolant out there.

[ricko]

Hi bros, can anyone advise me the servicing mileage for changing of timing chain? I am riding a year 08.

Thanks in advance.

[ricko]

Hi bros, can anyone advise me the servicing mileage for changing of timing chain? I am riding a year 08.

Thanks in advance.

[guangwei]

i hope its not my radiator prob.. i cannot afford to change a new radiator now..

[guangwei]

The coolant might the the issue too. But I've never tried engine ice so can't comment on how it performs. On old bikes the thermostat might not open fully due to age which lowers the cooling performance of the engine. Few months back my bike was hitting 105 deg c. Replaced the thermostat now warms up faster and cools down faster too. Never hit 103 deg c. Try check if they bleed out the cooling system properly (that should be the thing to check first) some times they rush the job so just top up the radiator to brim then close the cap. Never do coolant bleeding.

 

how much u buy ur thermostat

[Rom]

how much u buy ur thermostat

 

About $75. Do note my bike older than yours. You can also just take out the thermostat altogether and ride without one. You will need to change coolant also. If diy can just remove the thermostat housing let the coolant leak out do the repair then top up coolant. Save you from having to drain all the coolant.

[Rom]

Hi bros, can anyone advise me the servicing mileage for changing of timing chain? I am riding a year 08.

Thanks in advance.

 

Normally the timing chain will last the life time of the bike because unlike your drive chain, its sealed and constantly oiled.

[Blueblood]

Hi bros, can anyone advise me the servicing mileage for changing of timing chain? I am riding a year 08.

Thanks in advance.

 

street riding is about 80k km.

[cazlex]

Hi bros! Any idea where i can find racing foot rest?

Any good brands to intro? thanks!

[StormBlde]

Hi bros! Any idea where i can find racing foot rest?

Any good brands to intro? thanks!

 

Gilles Tooling Rearset. Buy online.

[Blueblood]

Hi bros! Any idea where i can find racing foot rest?

Any good brands to intro? thanks!

 

vortex v2. good grip n come with bendable brake n gear peds. if u wan top end will be graves or attack

[guangwei]

Say if I use the red key to reprogram another pair of key, can I delete the old pair of key from the ignition recognition?

 

Reason being, I bought my r6 recently and out of the sudden, the previous owner tell me he only have 1 set of key when its time to pass the key, and im afraid he might be keeping the other set. so can i delete the previous set of key?

[Blueblood]

Say if I use the red key to reprogram another pair of key, can I delete the old pair of key from the ignition recognition?

 

Reason being, I bought my r6 recently and out of the sudden, the previous owner tell me he only have 1 set of key when its time to pass the key, and im afraid he might be keeping the other set. so can i delete the previous set of key?

 

immobiliser is not a fool proof system n can be easily mingle. if u wan a peace in mind. get a reputable disc lock.

[StormBlde]

When reprogram, the old key will be useless. Reprogram can be done by yourself easily. Do not need any computer or kit. Just need the red key and the X number of black keys u need.

[Blueblood]

When reprogram, the old key will be useless. Reprogram can be done by yourself easily. Do not need any computer or kit. Just need the red key and the X number of black keys u need.

 

interesting. can share how it can be done?

[guangwei]

When reprogram, the old key will be useless. Reprogram can be done by yourself easily. Do not need any computer or kit. Just need the red key and the X number of black keys u need.

 

please enlighten. where to even get reliable blank key and for how much?

 

yamaha stockist as in hong leong?

Edited March 23, 2015 by guangwei

[StormBlde]

Auto cycle for Yamaha stock parts

[guangwei]

Auto cycle for Yamaha stock parts

 

 

 

Is it this site?

 

http://www.accycle.com.sg/

 

I cant seems to find uncut key, called the hotline, no ones pick up

zzz

[guangwei]

When reprogram, the old key will be useless. Reprogram can be done by yourself easily. Do not need any computer or kit. Just need the red key and the X number of black keys u need.

 

 

just called auto cycle. told that i can purchase 1 piece of blank key, if i only program 1 blank key, the previous 2 will be useless? if i try to program 3, the first 1 will become useless? are u sure i can delete old keys this way? hmmm'

 

if u can program x number of keys, it means there must be a way to render the old key useless or u will just end up with x number of key capable of operating the bike..

[guangwei]

Some shops I asked around offered me $80/key, cut and programmed. lol

 

 

Blank key autocycle offer me $25 each only. Part number:5SL-82511-08, Listed here

http://www.accycle.com.sg/ELECTRICAL2-YZFR6-5SLB

 

Not sure right item or not, unfortunately, autocycle seems to had abandon their website ages ago. The paypal feature dont work. The whole online order, and whole the site is crap. Nobody respond to email inquiry either. Called, kenna transfer to parts centre mechanic uncle, the mechanic totally clueless about the online shipment, ask me come down for $1 discount, at $24 per piece.. lol