Honda NT700V/650V Deuville

[more1978]

Care to share which shop?

The black panel under the saddle on the right side has lost most of it's mounting holes due to them cracking, so might need to get something rebuilt

 

blk3007 ubi road 1 #01-458

tel 67457965 hp 96602616

this shop do fiberglass and painting. but if ur parts missing big piece, then u need go to first moto(the 1st bike shop of the building).

above info i only exp firing repair, but don know panel box they can do it or not.

 

good luck!

[y2k]

Sure Bro. I bought Deauville cos its shaft driven, less maintenance and also quieter then my S4. Also as everyone have pointed out its a sofa on wheels! Can't agree more on that point.

 

Where about in Thai are you looking at going to?

 

Also what kind of spares will you be carrying? Perhaps we can even share cost of these spares if our travel plan doesn't clash!

 

I hv a Deauville, rectifier, voltmeter, worshop manual, fully serviced bike buy next weekend.

If your bike is fully serviced prior to your long trip, the spare that i hv shu be sufficient for our journey, to cover the next 10,000km.

 

 

Where about in Thailand will depend on number of days planned.

1 wk= south Thailand.

1 mth= north Thailand.

 

How many days do you have in your plan?

[y2k]

Urgently need to change all the piston seal set for front and back brake caliper.

Anybody know which site to search for 2002 model's parts number?

 

 

Thanks.

[013]

Urgently need to change all the piston seal set for front and back brake caliper.

Anybody know which site to search for 2002 model's parts number?

 

 

Thanks.

 

 

Right front Brake.

http://www.hondaofbournemouth.co.uk/part.aspx?part=5922

 

Rear Brake

http://www.hondaofbournemouth.co.uk/part.aspx?part=5925

 

I couldn't find the left side, should be the same as the right front brake.

hopefully this is the things u r finding.

[0yuan0]

hi guys, do let me know the price of a new nt700v machine price.

 

Where to get?

 

Best deal?

 

Edited January 10, 2010 by 0yuan0

[sornvukorn]

hi guys, does anyone know where i could get the whole set of nt650 fairings replaced?

someone knocked over my dad's bike. even the side panniers cracked...

[y2k]

Right front Brake.

http://www.hondaofbournemouth.co.uk/part.aspx?part=5922

 

Rear Brake

http://www.hondaofbournemouth.co.uk/part.aspx?part=5925

 

I couldn't find the left side, should be the same as the right front brake.

hopefully this is the things u r finding.

 

 

Thanks 013,

i m still searching for the left caliper piston seal parts number.

 

2002 Deauville's front brake design is similar to 2002 Black bird. They share the same brake pads but not too sure if they share the same piston seal's parts number.

 

Clarifications are needed to ensure if 2002 Deauville front caliper share the same parts, both left and right caliper.

 

Both Deauville and Black bird uses combination braking system by Nissin. From US site listed below, the Black bird right caliper, which is the caliper combining the rear brake, uses 3 difference parts number for respective piston. On the deauville, on the other hand, the left caliper is the combine caliper, thus may be similar to Black Bird design. confirmation is urgently needed to be sure.

 

Putting the wrong parts into the caliper seal may compromised safety and braking efficiency.

 

Hope to find the answer soon.

 

 

 

 

2002 Black Bird front right caliper.

http://www.mrcycles.com/fiche_section_detail.asp?section=128015&category=MOTORCYCLES&make=HONDA&year=2002&fveh=3034

 

2002 Black Bird front left caliper.

http://www.mrcycles.com/fiche_section_detail.asp?section=128016&category=MOTORCYCLES&make=HONDA&year=2002&fveh=3034

[y2k]

hi guys, does anyone know where i could get the whole set of nt650 fairings replaced?

someone knocked over my dad's bike. even the side panniers cracked...

 

 

 

You can try the following for new replacement parts:

FJT or Eversuccess.

Last option is Boon Siew.

 

If u cant find it at above places, Fiber glass shops can provide repair option.

Posted #1176 above.

 

Happy searching.

[sornvukorn]

thnks for info y2k... upz for this forum..

[more1978]

Thanks 013,

i m still searching for the left caliper piston seal parts number.

 

2002 Deauville's front brake design is similar to 2002 Black bird. They share the same brake pads but not too sure if they share the same piston seal's parts number.

 

Clarifications are needed to ensure if 2002 Deauville front caliper share the same parts, both left and right caliper.

 

Both Deauville and Black bird uses combination braking system by Nissin. From US site listed below, the Black bird right caliper, which is the caliper combining the rear brake, uses 3 difference parts number for respective piston. On the deauville, on the other hand, the left caliper is the combine caliper, thus may be similar to Black Bird design. confirmation is urgently needed to be sure.

 

Putting the wrong parts into the caliper seal may compromised safety and braking efficiency.

 

Hope to find the answer soon.

 

 

 

 

2002 Black Bird front right caliper.

http://www.mrcycles.com/fiche_section_detail.asp?section=128015&category=MOTORCYCLES&make=HONDA&year=2002&fveh=3034

 

2002 Black Bird front left caliper.

http://www.mrcycles.com/fiche_section_detail.asp?section=128016&category=MOTORCYCLES&make=HONDA&year=2002&fveh=3034

 

deauville700 front break also similer wif 650 v2 version onwards, but not sure same or not.

Edited January 12, 2010 by more1978

[more1978]

about this weekend malacca trip, 2 members bike not ready, 2 members pp not ready, this weekend i think cancelled above plan, but i will drive car go malacca. so i change plan:

plan1: next saturday afternoon go malacca, come back sin at same day nite;

plan2: next sunday morning go malacca, come back sin at same day afternoon.

if all bros not interest go for malacca trip, then:

plan3: sunday morning go JB (taman sentosa) dabao bah kuteh or other food or have breakfirst & coffee, then b4 noon come back sin.

how? let me know which plan u prefer? or u have another better plan? then we choice the plan most pp like it to go, ok?

 

some pp take plan2. sunday morning 6am meetup @birdpark carpark, b4 lunch or after lunch then return back.

 

1)y2k

2)firedragon

3)more1978

[013]

Thanks 013,

i m still searching for the left caliper piston seal parts number.

 

2002 Deauville's front brake design is similar to 2002 Black bird. They share the same brake pads but not too sure if they share the same piston seal's parts number.

 

Clarifications are needed to ensure if 2002 Deauville front caliper share the same parts, both left and right caliper.

 

Both Deauville and Black bird uses combination braking system by Nissin. From US site listed below, the Black bird right caliper, which is the caliper combining the rear brake, uses 3 difference parts number for respective piston. On the deauville, on the other hand, the left caliper is the combine caliper, thus may be similar to Black Bird design. confirmation is urgently needed to be sure.

 

Putting the wrong parts into the caliper seal may compromised safety and braking efficiency.

 

Hope to find the answer soon.

 

 

 

 

2002 Black Bird front right caliper.

http://www.mrcycles.com/fiche_section_detail.asp?section=128015&category=MOTORCYCLES&make=HONDA&year=2002&fveh=3034

 

2002 Black Bird front left caliper.

http://www.mrcycles.com/fiche_section_detail.asp?section=128016&category=MOTORCYCLES&make=HONDA&year=2002&fveh=3034

 

looks similar, but still need to confirm if it is the same as CBR1100.

also the website i list was w/o part no.

didnt notice tat. my bad

but i look thru the models, most of it have Left n Right.

only 02 is special.

will try to help u find the uk site if they have information on those.

[seahmh]

hi guys, do let me know the price of a new nt700v machine price.

 

Where to get?

 

Best deal?

 

 

Hi, expert Deuvilleans here,

 

Does anyone has any information on this??

 

Would like to know the price too, for consideration purposes.

 

Thank you.

 

 

If it is a sky-high price, may consider Dr Deauville's "Mr Blue" or "Miss Maroon" if it is still available by then... lolz...

[Boner]

Mr Hippo, time to "zhou kang" haha, please share the latest price for Deauville 700

[musram]

Hi, expert Deuvilleans here,

 

Does anyone has any information on this??

 

Would like to know the price too, for consideration purposes.

 

Thank you.

 

 

If it is a sky-high price, may consider Dr Deauville's "Mr Blue" or "Miss Maroon" if it is still available by then... lolz...

Machine price 3 months ago: $16,500.

2006 model still under BS warranty

[seahmh]

Machine price 3 months ago: $16,500.

2006 model still under BS warranty

 

Thanks for sharing, Bro.

 

The NT700 you own in Dec 09 is the '06 model or the '09 model??

 

Any difference between the two models?

 

Or the '06 model you are referring to, is the NT650??

 

Pardon me for my ignorance.

 

Thank you.

[Resilience]

I salute you all for helping Deauville owners with their questions. The group meetups had obviously fostered friendships.

 

Some Deauvilleans are outstanding in this forum for their contributions. You all have ignited my interest in Honda Deauville.

 

Heh, I might be converted to ride one and become true blue Deauvillean !!!

[Firedragon]

Hello fellow Deauville bros,

 

Anyone selling his Monorack shown in the attachment, because I need it for holding my current top box.

[y2k]

Hello fellow Deauville bros,

 

Anyone selling his Monorack shown in the attachment, because I need it for holding my current top box.

 

Something similar was sold at Ah Boy shop.

Its the old model Givi aluminum base plate.

Much bigger and stronger then the current plastic base plate.

Not too sure if he stock that old model plate.

If you are in town, just pop in and try your luck.

 

But, modification is required to fit into your bike's bracket.

Not too sure if its worth the risk of paying for something that may not fit.

Good luck.

Edited January 12, 2010 by y2k

[Firedragon]

Something similar was sold at Ah Boy shop.

Its the old model Givi aluminum base plate.

Much bigger and stronger then the current plastic base plate.

Not too sure if he stock that old model plate.

If you are in town, just pop in and try your luck.

 

But, modification is required to fit into your bike's bracket.

Not too sure if its worth the risk of paying for something that wil not fix.

Good luck.

 

Thank you for the recommending but I prefer the original one which shown in the picture, more durable. Cos my current one which is modification one and now bended due to the force of the wind.

 

I rather goes for something that's worth for buying...

[more1978]

some pp take plan2. sunday morning 6am meetup @birdpark carpark, b4 lunch or after lunch then return back.

 

1)y2k

2)firedragon

3)more1978

 

only 3 of us? anyone also will join us?

[y2k]

I salute you all for helping Deauville owners with their questions. The group meetups had obviously fostered friendships.

 

Some Deauvilleans are outstanding in this forum for their contributions. You all have ignited my interest in Honda Deauville.

 

Heh, I might be converted to ride one and become true blue Deauvillean !!!

 

My 2 cents,

 

Every bike designs have their pro and con.

Deauville can provide “two up” tour with lots of comfort.

She has the great option to wear the best 17ins front tyre in our market.

Most tourer that can provide this kind of comfort comes with 18ins front tyre.

 

I was wondering why other makers are not putting the popular 17ins on their tourer.

Engineers know 18ins rim provide better stability. However Honda had done a very good job in designing the Deauville's front rim to provide the stability of 18ins into Deauville 17ins rim. The mass of the front rim is enhance to increase the gyroscopic force towards 18ins spec. Thus providing ample stability for touring, handling “two up” in highway and country roads are very sweet.

17ins design also increases the options of putting much better choice of stickier front tyre.

Especially in sg, sticky and fresh 18ins front tyre is not easily available.

 

The best point on the Deauville. Honda designed it as a safe tourer.

If you like sport touring, pls look at other options in the market.

Deauville is not designed to be a sport tourer

If you are safety conscious true blue tourer,

Deauville is the safest tourer money can buy.

[fishtan]

Hello fellow Deauville bros,

 

Anyone selling his Monorack shown in the attachment, because I need it for holding my current top box.

 

Hey Bro

 

Just something to share with you cos 2 months back I also dealing with this whole mono rack issue. Singapore no one carry new already and unless you order from Mah motor (Givi dealer) and they charge something like $280 just for the rack. So I went online and found someone selling from UK cost 85pounds and with shipment comes to less than S$210. SO I bought but shipment never arrive, but good thing is seller is honest and claim his insurance and return me my money.

 

So in the end I went to Chap Lee who refer me to 298 or was it 299, that shop at Jalan Besar and they modify old Givi monorack frame and fix it for me. I also bought their conoco box as well and paid the whole thing for S$210.

 

So I would suggest you get the modify rack. It is also very very sturdy and strong, best part is no need to wait for long shipment and not to mention higher cost.

[more1978]

only 3 of us? anyone also will join us?

 

b4 or after dinner come back sin, if around lunch time come back from malacca may too rush.

now anybody will join us?

[ray73]

b4 or after dinner come back sin, if around lunch time come back from malacca may too rush.

now anybody will join us?

 

sorry bros, u guy enjoy the trip, i will be working this sunday. happy riding.

 

any bros...interested to go in on 23 jan 2009 Saturday night, look for seafood makan?

Edited January 13, 2010 by ray73