[Group] Kawasaki ER6N

[Corse]

saw a yellow one at ssdc today...very nice...

 

 

Yup, A riding instructor owns it. He's wants to sell it for abt 12k.

With Carbon Fibre Parts, aftermarket rearsets and Akra Exhaust.

 

Its been very well taken care off. I ride with him too.

 

Anyone interested, leave me a msg.. Thanks.

[norhisham]

Selling akra exhaust for er6n? How much?

[Dinzmetal]

Selling akra exhaust for er6n? How much?

 

Hmm.. i would also like to know the price..

[Dinzmetal]

Hi Guys, I am currenly riding the 2009 ER-6F for about 3 weeks now clocking about 700kms. The F is the full-faired version with ABS that brought into our shores.

 

My verdict after riding the bike as follows:

 

Looks:

Fell in love with it straight after viewing it at loois. I had several other bikes in mind, but they were all blown away by this bikes' looks. Lime green is the color to go for. Great loud color to go with a clean & mean looking bike. IMO, theres no other bike as sexy as this in its category for the price range. Price?

 

Price:

My ER-6F otw is $18K. Machine price $14.8k. It is slightly more expensive than other common 600cc out there (eg FZ6, Diversion6, GSR600).

 

Fuel:

Tank is small comparing to my previous bike, S4. Full tank is slightly more than 11 litres (maybe more coz I will fill up as soon as the fuel warning light comes on). Full tank will take you 175km. Averaging a milage of 15-16km/litres. Quite high consumtion IMO.

 

Accesories:

Pretty much hard to find. But I have already installed the Ermax tail tidy from Motorworld, Rim Stickers (cheap ones), Did my hard run-in on the Dyno at HKL, and planning to get the no cut Frame Slider from Motorworl, axle and fork sliders from Equipment Xtreme. Afterwhich, Slip-onsss!!! Anyone knows which shop carries them? Arrow? haha..

 

Riding:

I had no problems adjusting from riding my S4 to this bike. I was amazed at how fluid the transition was. The power delivery is much like off road bikes (maybe its all in the head due to the simillar exhaust note to off road bikes). Torque is healthy low to mid revs. I have tried it only to about 7-8k rpm, which is where the peak torque is. The bike is amazingly light & agile. Just point to where your going and twist the throttle more!! Rider seat is narrow. Will forsee slight discomfort arrising if ridden for long. The pillion has a better ride with wider seats. Overall bike dimensions is slim, camparable or slightly slimmer than the S4. Its an ease lane splitting in heavy traffic.

 

Overall:

Great commuter bike with bad ass ninja looks. The downside; exhaust note is more like a phantom + DRZ. Gotta get the aftermarket slip-on if you are bothered by it. Ther's little under seat storage. Its enugh only for the tool kit, riding gloves, cleaning cloths, & riding papers.

 

Will update more when I have more ride time on this beauty!

[Dinzmetal]

I chanced upon a msian riding the ER6N at LAB a few weeks ago. He mentioned that he hit 210km/hr without any problems adding that his friend using a yoshi pipe managed 220km/hr. Has anyone tried out the top speed of this bike after full run-in period?

[Dinzmetal]

hmm.. very quiet here. I wonder how many ER6s are there in Sg. if you guys do chance upon me or viceversa on the road, do give a honk ayte!

[Dinzmetal]

This tread is so dead... No one riding this bike and in this forum?

[gddigger]

I think there are about twenty plus units of ER6N in singapore since 06' till now. Its a shame that the 09" model for ER6N didn't come in, restyled and new mapping. The Versys is a more popular choice than the ER6. Congrats on getting a bike you can appreciate.

 

Cheers,

g

[gddigger]

Sorry, double post.

 

Cheers,

g

Edited December 1, 2009 by gddigger

[Dinzmetal]

There's even lesser of the ER-6Fs ard sg. I did Ask Evershine abt the number and was told ther were onli 2 that does serving with them and a couple more at Loois... So sad, but its a sure head turner wheather its N or F versions at stop lights..

 

 

I think there are about twenty plus units of ER6N in singapore since 06' till now. Its a shame that the 09" model for ER6N didn't come in, restyled and new mapping. The Versys is a more popular choice than the ER6. Congrats on getting a bike you can appreciate.

 

Cheers,

g

[swoosh]

loois sold a unit last week so u have one more companion

[gunshead]

dinzmetal,

 

http://www.kawasaki.com.my

 

msia is assembly localy in shah alam glenmarie er-6n 2009

 

i just sent them email on saying that if i buy in spore and bring over to msia for servicing and buying parts in factory. I am waiting for thier reply. 18/12/09 dent mail to them.

 

they only do naked er-6

 

i also consider to buy gsr 600 or yamaha fazer s2 600 not diversion 6

 

but since got abs and full fairing er-6f...... i don't like this

 

I WANT ER-6N OF 2009

singapore don't have

i am crying

 

why la evershine never bring in

 

my budget only 16K

[gunshead]

Dinzmetal

 

your report is so nice.

i really appreciate

 

keep writing

i want to know about your machine

[swoosh]

dinzmetal,

 

http://www.kawasaki.com.my

 

msia is assembly localy in shah alam glenmarie er-6n 2009

 

i just sent them email on saying that if i buy in spore and bring over to msia for servicing and buying parts in factory. I am waiting for thier reply. 18/12/09 dent mail to them.

 

they only do naked er-6

 

i also consider to buy gsr 600 or yamaha fazer s2 600 not diversion 6

 

but since got abs and full fairing er-6f...... i don't like this

 

I WANT ER-6N OF 2009

singapore don't have

i am crying

 

why la evershine never bring in

 

my budget only 16K

 

can consider 06 model at a much lower price. Parts can be obtain easily slighltly up north. Just email their agent in JB for availability.

[gunshead]

swoosh thanks

 

but I am a coward when comes to resale bikes.

afraid of many things

so better stick to new ones

 

anyway, after watching youtube and others sources

i kinda fall or rise in love with er-6f especially green color.

 

the meter panel also very neat and nice. I just need to add on gear position meter.

[Dinzmetal]

So after 4000kms on the bike and services at 800km, 2000km & 4000kms, I am so addicted to riding this bike.

 

Servicing:

The first and second service done at Evershine at 800 and 2000kms is relatively cheap at $51.20 and $41.03 respectively. The breakdown of parts as follows:

 

Oil filter: $19.35

Engine Oil: $9.50 X 2 or 3 Bottle Mineral based (Yeah 2litres of Oil is enugh )

 

At 4000kms, switched to semi synthetic at $18/bottle, amounting to $78.48

 

So, tats all for servicing at the moment. Will be going again at 8000kms, at which i have to pay for workmanship already (quoted $20++)

 

Top Speed:

Very fast very QUICK..

 

Close Calls:

Thanks for the ABS on this baby, it saved my life twice..

1st incident: Wet morning along Thompson rd opp Mt Alvernia Hospital, a car from the filter lane on the left cuts into my lane. Immediately jammed the brakes, ABS kicked with the brakes shuddering to a halt. Thank god there wasnt any cars behind.

 

2nd incident: Junction of Yishun Ave 5 and Ave 2. Same situation as mentioned above. This time, managed to show (hand sign) my disgust to the driver for his rash driving.

 

Wouldnt be so lucky if not for me slowing down prior to the incidents on both occasions.

 

 

Accesories:

Nothing much done except for DIY Dynamx voltmeter. Unfortunately, the No-cut slider I was intending to get at motorworld is for 08 model. Guess have to wait longer for accesories available in sg. Endcan? Still waiting again for the Scorpion paperworks to be firmed up.

 

Milage:

Yeah, finally got a constant milage of 18.7-19km/litres. Pump Esso 95 all the way and might be switch to 98 to see the difference in milage. Stay tune for updates

 

 

 

Hi Guys, I am currenly riding the 2009 ER-6F for about 3 weeks now clocking about 700kms. The F is the full-faired version with ABS that brought into our shores.

 

My verdict after riding the bike as follows:

 

Looks:

Fell in love with it straight after viewing it at loois. I had several other bikes in mind, but they were all blown away by this bikes' looks. Lime green is the color to go for. Great loud color to go with a clean & mean looking bike. IMO, theres no other bike as sexy as this in its category for the price range. Price?

 

Price:

My ER-6F otw is $18K. Machine price $14.8k. It is slightly more expensive than other common 600cc out there (eg FZ6, Diversion6, GSR600).

 

Fuel:

Tank is small comparing to my previous bike, S4. Full tank is slightly more than 11 litres (maybe more coz I will fill up as soon as the fuel warning light comes on). Full tank will take you 175km. Averaging a milage of 15-16km/litres. Quite high consumtion IMO.

 

Accesories:

Pretty much hard to find. But I have already installed the Ermax tail tidy from Motorworld, Rim Stickers (cheap ones), Did my hard run-in on the Dyno at HKL, and planning to get the no cut Frame Slider from Motorworl, axle and fork sliders from Equipment Xtreme. Afterwhich, Slip-onsss!!! Anyone knows which shop carries them? Arrow? haha..

 

Riding:

I had no problems adjusting from riding my S4 to this bike. I was amazed at how fluid the transition was. The power delivery is much like off road bikes (maybe its all in the head due to the simillar exhaust note to off road bikes). Torque is healthy low to mid revs. I have tried it only to about 7-8k rpm, which is where the peak torque is. The bike is amazingly light & agile. Just point to where your going and twist the throttle more!! Rider seat is narrow. Will forsee slight discomfort arrising if ridden for long. The pillion has a better ride with wider seats. Overall bike dimensions is slim, camparable or slightly slimmer than the S4. Its an ease lane splitting in heavy traffic.

 

Overall:

Great commuter bike with bad ass ninja looks. The downside; exhaust note is more like a phantom + DRZ. Gotta get the aftermarket slip-on if you are bothered by it. Ther's little under seat storage. Its enugh only for the tool kit, riding gloves, cleaning cloths, & riding papers.

 

Will update more when I have more ride time on this beauty!

[Dinzmetal]

Such a shame they din bring them in.. if buying parts from msia is cheper than in sg (evershine), i might consider as parts for the er-6f and er-6n is the same except for the fairings.. will be waiting for the update

 

 

dinzmetal,

 

http://www.kawasaki.com.my

 

msia is assembly localy in shah alam glenmarie er-6n 2009

 

i just sent them email on saying that if i buy in spore and bring over to msia for servicing and buying parts in factory. I am waiting for thier reply. 18/12/09 dent mail to them.

 

they only do naked er-6

 

i also consider to buy gsr 600 or yamaha fazer s2 600 not diversion 6

 

but since got abs and full fairing er-6f...... i don't like this

 

I WANT ER-6N OF 2009

singapore don't have

i am crying

 

why la evershine never bring in

 

my budget only 16K

[Eric1971]

Hi friends,

 

I have put up a sales on my ER6-n, the link is the sales thread.

http://www.singaporebikes.com/forums/showthread.php?t=265374

thank you..

[Dinzmetal]

Saw a lime green er-6f at pasir ris last sat. Blue one along beach rd a month back.. and a black er-6n filtering into the rd to imm few mths back.. im juz excited seeing our bikes on the rd... looks like the population getting more healthy!

[Eric1971]

Hi friends,

 

Some parts are on sales for my ex-ER6-n, photos can be viewed on the following link.

http://www.singaporebikes.com/forums...d.php?t=265374

thank you..

[Dinzmetal]

Bro, from the link, ur bike is sold. Which parts available on sale?

 

Accessories:

Street Legal Giannelli Exhuast with LTA Approval?

Original Er6n Tank Pad?

Custom made IU mount?

Custom made Balancer?

BMW hand grip?

Custom made radiator mesh? Very Interested

Custom made rear stand pins.? Very Interested

Ariete L-shape safety valves?

Auto Gauge Digital Volt Meter?

RevTec Impedance Stabiliser?

VENHILL High Quality Braided Brake Lines?

Pyramid Plastics Carbon Fibre Hugger? Will consider if can fit 09 model

Pyramid Plastics Fenda Entenda? Interested

LEDs Brake light and signal lights?

Air Horns?

 

 

Hi friends,

 

Some parts are on sales for my ex-ER6-n, photos can be viewed on the following link.

http://www.singaporebikes.com/forums...d.php?t=265374

thank you..

[Eric1971]

Bro, from the link, ur bike is sold. Which parts available on sale?

 

Accessories:

Street Legal Giannelli Exhuast with LTA Approval?

Original Er6n Tank Pad?

Custom made IU mount?

Custom made Balancer?

BMW hand grip?

Custom made radiator mesh? Very Interested

Custom made rear stand pins.? Very Interested

Ariete L-shape safety valves?

Auto Gauge Digital Volt Meter?

RevTec Impedance Stabiliser?

VENHILL High Quality Braided Brake Lines?

Pyramid Plastics Carbon Fibre Hugger? Will consider if can fit 09 model

Pyramid Plastics Fenda Entenda? Interested

LEDs Brake light and signal lights?

Air Horns?

 

Accessories:

Street Legal Giannelli Exhuast with LTA Approval

Custom made radiator mesh

Custom made rear stand pins.

Auto Gauge Digital Volt Meter

RevTec Impedance Stabiliser

VENHILL High Quality Braided Brake Lines

Pyramid Plastics Carbon Fibre Hugger

Pyramid Plastics Fenda Entenda

Healtech Speedohealer

 

Hehe.. sorry to mention which are available. Some parts are still attached to the bike which me dont feel like removing it.

[Dinzmetal]

PM Sent

 

Accessories:

Street Legal Giannelli Exhuast with LTA Approval

Custom made radiator mesh

Custom made rear stand pins.

Auto Gauge Digital Volt Meter

RevTec Impedance Stabiliser

VENHILL High Quality Braided Brake Lines

Pyramid Plastics Carbon Fibre Hugger

Pyramid Plastics Fenda Entenda

Healtech Speedohealer

 

Hehe.. sorry to mention which are available. Some parts are still attached to the bike which me dont feel like removing it.

[Eric1971]

PM Sent

 

PM Sent

[heng22]

Hi all, I just sold my bike and have the following parts for sale.

 

H&B rack for top box .$120

 

[ATTACH]160157[/ATTACH]

 

H&B crash bar. $130

 

[ATTACH]160158[/ATTACH]

 

[ATTACH]160159[/ATTACH]

 

Rizoma rearset with passenger foot peg. $550

Akrapovic exhaust (LTA approved) . $550

 

[ATTACH]160153[/ATTACH]

 

 

[ATTACH]160154[/ATTACH]

 

Interested party can contact me at 97862904 (Heng)

Edited June 19, 2010 by heng22