[Discussion] CB400 SUPER FOUR HYPER VTEC Revo

[Skuzz]

Hi Bros,

 

May I ask what is the correct or recommended spark plug gap for SUPER4 REVO? It's not stated in the manual. I intend to change the spark plugs myself. Many thanks.

 

Thy usually come pre-set at 0.8mm if using NGK or Denson, I've never had a problem just putting them straight in.

[Winners]

Thy usually come pre-set at 0.8mm if using NGK or Denson, I've never had a problem just putting them straight in.

Thanks, will check out the pre-set gap on my new NGK R plugs.

[azman ibrahim]

guys. any help on where to duplicate keys?

[HaiR1]

guys. any help on where to duplicate keys?

 

 

Go to the Key shop beside Regina Specialist

 

Price is $60/ key include programming

[Johnsonsp]

Merry Christmas to all rider.. ride safe

[Johnsonsp]

Any rider using megular polishing can you take a pic to show me? I today went down to take a look but I not sure which one is it. Is it the one with the shining rim with it?

[Skuzz]

Guys, anyone fitted a "Fenda Extenda" to the front fender? Ideas please, maybe the NC700 is similar??

[kaizersg]

Hi does anyone here know e price for brand new showa revo shocks.. thk eu..

 

Sent from my GT-P3100 using Tapatalk

[Skuzz]

Hi does anyone here know e price for brand new showa revo shocks.. thk eu..

 

Sent from my GT-P3100 using Tapatalk

 

Part number is 52400-MFM-003

Price in Euros 466.00 each (around $815 each!!! in your money)

[Skuzz]

Hi Bros,

 

May I ask what is the correct or recommended spark plug gap for SUPER4 REVO? It's not stated in the manual. I intend to change the spark plugs myself. Many thanks.

 

Finally came across NGK's website, it quotes 0.7mm for the recommended gap

[Winners]

Finally came across NGK's website, it quotes 0.7mm for the recommended gap

Thanks bro, but can provide the link to the NGK's website because I also want to check for my car model as well.

[Skuzz]

Thanks bro, but can provide the link to the NGK's website because I also want to check for my car model as well.

 

For the CB400I had to go to the Austrailian distibutors site where they refer to our bike as Honda 399 cc CB400A 05/2008 - on, 08, 4 Cyl, DOHC, 16V, 4 Stroke. Here is the link http://www.ngk.com.au/

[Johnsonsp]

Hi guys i just collected my new revo today its a amazing ride very smooth. like it alot

[Winners]

For the CB400I had to go to the Austrailian distibutors site where they refer to our bike as Honda 399 cc CB400A 05/2008 - on, 08, 4 Cyl, DOHC, 16V, 4 Stroke. Here is the link http://www.ngk.com.au/

Thanks bro.

[barbebushae]

Hi guys,

A few questions here, should I change engine oil (mineral type) and engine ice coolant water to the newly bike? Or it can ride without change anything until over running in period?? Thanks in advance

[kaizersg]

Part number is 52400-MFM-003

Price in Euros 466.00 each (around $815 each!!! in your money)

 

Appreciate that buddy , thanks =)

 

Sent from my GT-P3100 using Tapatalk

[Skuzz]

Hi guys,

A few questions here, should I change engine oil (mineral type) and engine ice coolant water to the newly bike? Or it can ride without change anything until over running in period?? Thanks in advance

 

Have a look at this http://www.mototuneusa.com/break_in_secrets.htm

 

I personally still prefer to follow the manufacturers rules of gentle break in, but I do change the oil for mineral.

 

On the coolant look here http://www.thumpertalk.com/topic/756059-engine-ice-coolantany-good/

 

Plenty on opinions, I personally would leave the Honda coolant in and use it for the recommended 3 years maximum

[Johnsonsp]

hi all may i know how to apply bike cover after riding? need to wait for the engine to cool down then put the cover? need to cool down the engine for how long then can put?

[SparkerS1]

Hi guys,

A few questions here, should I change engine oil (mineral type) and engine ice coolant water to the newly bike? Or it can ride without change anything until over running in period?? Thanks in advance

Use mineral oil for normal running-in intervals.

No need to change coolant as it is very lasting.

hi all may i know how to apply bike cover after riding? need to wait for the engine to cool down then put the cover? need to cool down the engine for how long then can put?

Best is to cover after one hr for the bike to cool down slightly.

Some bike covers can melt onto your exhaust if too hot, some exhaust might have stains if covered straight away after riding.

[Johnsonsp]

Anyone interested to buy https://www.facebook.com/photo.php?fbid=667869889902404&set=a.667869709902422.1073741934.151817441507654&type=1&theater this helmet at motorworld. buy 2 cheaper anyone want to share?

[barbebushae]

Anyone interested to buy https://www.facebook.com/photo.php?fbid=667869889902404&set=a.667869709902422.1073741934.151817441507654&type=1&theater this helmet at motorworld. buy 2 cheaper anyone want to share?

 

How much and where to buy bro??

[barbebushae]

Have a look at this http://www.mototuneusa.com/break_in_secrets.htm

 

I personally still prefer to follow the manufacturers rules of gentle break in, but I do change the oil for mineral.

 

On the coolant look here http://www.thumpertalk.com/topic/756059-engine-ice-coolantany-good/

 

Plenty on opinions, I personally would leave the Honda coolant in and use it for the recommended 3 years maximum

 

Thanks for your advise buddy

[archpunk]

hi. can someone explain to me the difference between revo and spec 3? planning to buy super 4 soon. thanks in advance guys!

 

p.s. links that could help me understand better would be appreciated as well

[Johnsonsp]

How much and where to buy bro??

 

bro, The one I like is 240 and is at kaki bukit. Are you interested to buy. We can go down tgt

[HaiR1]

hi. can someone explain to me the difference between revo and spec 3? planning to buy super 4 soon. thanks in advance guys!

 

p.s. links that could help me understand better would be appreciated as well

 

 

 

Do read up on individual thread

 

 

Too muh too pinpoint