[Group] SUZUKI Bandit

[kata_killer]

Originally posted by Lcbear350@Apr 28 2005, 06:26 PM

kena $200 summon for dropping a cig butt at the carpark. was there to help a friend whose bike can't start. such a ULU carpark got at least 5 to 8 fellows there watching. thought they were some driving instructors who teach parking in the area. seems like the gahment is stepping down on this seriously. do take note when u throw your litter around.

Which Carpark u kanna? Can tell us d location?

[jkaiser]

s750wp, u gonna buy repsol oil izzit? from where n how much ah?

[Lcbear350]

Originally posted by kata_killer@Apr 29 2005, 03:19 AM

Which Carpark u kanna? Can tell us d location?

kena at geylang asian village carpark. the one opp haig road. now have to be careful of old men hanging ard suspiciously.

[Shawn--]

oh no.. its not onli 3rd gear... its every gear sial... after 6k rpm da speed cant go up smoothly but da loud is there.. It happened ever since i put in K&N filter.. or issit bcoz da of air intake ?

[S750WP]

Originally posted by DREAM_MACHINE@Apr 28 2005, 11:30 PM

The stebel only consist of twin horns and relay only...no wires n switches..i did mine in JB,got the Type R Horns for Rm45 including switch n wires n only then i replaced the Type R wit Stebel horns.

I got the stebel horns today, $20 at Alexandra village, as its nearer to my place. Can Stebel horns pass inspection if not I will install a SPDT switch to flip between stock horns and stebel horns.

[S750WP]

Originally posted by rAjOaNa@Apr 29 2005, 12:26 AM

Any of u guys wanna go down n buy the stuff together or something??

not too sure of wat to get n all.

Only know need to get the DPDT switch for hazard light.

Wires, another switch i guess jus a on n off for the fan.

n do we need another bracket or screws to mount this switches??

 

May I suggest before the DIY, we go together to SLT to get the switches and stuffs you guys need, them move on to LAB to get the signal relay. Finally DIY the switches opp LAB mscp.

 

You can see how I mount my switches I did not use bracket. My switches, one cable tie, another stuck in between the crevices, while my hazard light switch is hold by double side tape. I am going to glue the hazard light switch permanetly because the double side tape is not very secure.

 

I'm not sure if SLT is open on sunday, I'm planning to install my Stebel horns on sunday , probably we can get the stuff and DIY the switches.

[S750WP]

Originally posted by jkaiser@Apr 29 2005, 01:29 PM

s750wp, u gonna buy repsol oil izzit? from where n how much ah?

I got the Repsol oil from Ah Koon last time at Depot Road $18 per bottle, change at the shop, now he has moved to a new place not far from my place. Will change to repsol for my next oil change, probably will bring the oil to change at malaysia because want to change the clutch sleeve hub and the thrust washer.

 

Ah Koon's Shop

[S750WP]

Originally posted by Shawn--@Apr 29 2005, 03:32 PM

oh no.. its not onli 3rd gear... its every gear sial... after 6k rpm da speed cant go up smoothly but da loud is there.. It happened ever since i put in K&N filter.. or issit bcoz da of air intake ?

Try to put back the stock filters and see if the problem goes away. Btw did you oil your K&N filter, oil every plait once and do not over oil the filter.

[rAjOaNa]

DIY session this sun??

wat time? where meet up??

[S750WP]

Originally posted by rAjOaNa@Apr 30 2005, 12:14 AM

DIY session this sun??

wat time? where meet up??

I dunno if SLT opens on sunday, if not DIY next week.

[Shawn--]

Originally posted by S750WP@Apr 29 2005, 09:19 PM

Try to put back the stock filters and see if the problem goes away. Btw did you oil your K&N filter, oil every plait once and do not over oil the filter.

siao liao... i think i over oil it. Wad can i do to solve it ? Wash it again n oil ? Tat time i use tat K&N no problem.. then i change another K&N which is newer then tio this..

[kata_killer]

Originally posted by S750WP@Apr 30 2005, 02:39 AM

I dunno if SLT opens on sunday, if not DIY next week.

Huh? next week, I will be at Malacca on Next Sat n Sun.... I'm d organiser, wanna join me?

 

http://www.singaporebikes.com/forum/index....ic=68443&st=870

[rAjOaNa]

Originally posted by kata_killer@Apr 30 2005, 04:56 AM

Huh? next week, I will be at Malacca on Next Sat n Sun.... I'm d organiser, wanna join me?

 

http://www.singaporebikes.com/forum/index....ic=68443&st=870

Still got vacancy?

me n my friend with a TA200 thinking of joining.

[Xiao_Di]

Originally posted by rAjOaNa@Apr 30 2005, 03:51 PM

Still got vacancy?

me n my friend with a TA200 thinking of joining.

got.....u n ur friend can take up 1 room

[rAjOaNa]

Originally posted by rAjOaNa@Apr 30 2005, 12:14 AM

DIY session this sun??

wat time? where meet up??

So are we guys meeting up tomorrow for some DIY??

[S750WP]

Originally posted by Shawn--@Apr 30 2005, 04:33 AM

siao liao... i think i over oil it. Wad can i do to solve it ? Wash it again n oil ? Tat time i use tat K&N no problem.. then i change another K&N which is newer then tio this..

Wash and let it dry completely then re oil will do.

[S750WP]

Originally posted by kata_killer@Apr 30 2005, 04:56 AM

Huh? next week, I will be at Malacca on Next Sat n Sun.... I'm d organiser, wanna join me?

 

http://www.singaporebikes.com/forum/index....ic=68443&st=870

Next sunday I working leh, maybe I join the sat day trip. Will organise the DIY after your trip, ok??

[S750WP]

Originally posted by rAjOaNa@May 1 2005, 12:27 AM

So are we guys meeting up tomorrow for some DIY??

Sorry guys my PC is going to crash anytime(hard disk got tik tak sound...), may have problem logging in here to read forum. DIY session postpone until further notice.

[kata_killer]

Originally posted by S750WP@May 1 2005, 09:40 AM

Next sunday I working leh, maybe I join the sat day trip. Will organise the DIY after your trip, ok??

Thanks.....

[rAjOaNa]

Originally posted by kata_killer@Apr 23 2005, 01:23 PM

I think U change to early liao. I normally change gear between 4-6 Rmp. No wonder makan so many pertol lah.

i still dun really get the logic but somehow it seems to be true.

Cos last 2 days since i pump full tank from JB i mostly been riding on E'way only. So i m doing 70-90 meaning RPM 4.5-5.5k ard there la.

comparing to my normal riding style on minor roads my RPM hardly touches 4.

 

So over the last 2 days ...riding abt 177km my metre showing fuel level slightly below half only. last time 120km already half. Let see how far can i go this time...

 

 

btw warming up for ard 5 mins waste alot of petrol or not?

[kata_killer]

Originally posted by rAjOaNa@May 2 2005, 12:56 AM

i still dun really get the logic but somehow it seems to be true.

Cos last 2 days since i pump full tank from JB i mostly been riding on E'way only. So i m doing 70-90 meaning RPM 4.5-5.5k ard there la.

comparing to my normal riding style on minor roads my RPM hardly touches 4.

 

So over the last 2 days ...riding abt 177km my metre showing fuel level slightly below half only. last time 120km already half. Let see how far can i go this time...

 

 

btw warming up for ard 5 mins waste alot of petrol or not?

okay lah.... But I usually wait for 2-3min for warming up d bike.

[Shawn--]

Anyone here using bitubo rear shock ??

[S750WP]

Originally posted by kata_killer@May 2 2005, 03:53 AM

okay lah.... But I usually wait for 2-3min for warming up d bike.

Sometimes when rushing for time, I just start and go.

[rAjOaNa]

Originally posted by S750WP@May 2 2005, 08:26 AM

Sometimes when rushing for time, I just start and go.

But for cold engine isn't tht bad?

Cos the oil is thick n it takes some time to go up to the pistons.

[Shawn--]

Originally posted by rAjOaNa@May 2 2005, 02:47 PM

But for cold engine isn't tht bad?

Cos the oil is thick n it takes some time to go up to the pistons.

rAjOaNa : ur headlight inspection how cum fail ? u change to wad headlight? In da end u change back to da stock wan ?