[Group] Singapore BAJAJ Team (SBT)

[arthur_chan]

has any one here got the hella horn? need any mod to install it? our just remove the stock n replace it?

I'm experiencing at least a couple of 'dangerously cutting in to my lane' cases every day...

 

me me, need to re-route wiring n install relay to get best result, persnally hella is only a tiny bit louder, but i'm comparing old horn with new ones. but hella is cheaper.

[Ah_Pet]

yester just bought my sbs brake pad for $18. i try neg abit but failed.

 

i ask him if MO 5 to 10 pcs got cheaper or not. he say No, normally bike shop take 20pcs also not much discount.

 

anyway he don have 671sq cermic already. but have another same model. [which i cant rember, tonight then post pic]

 

he still have 8 pairs of brake pad left. once sold out have to wait 3 mths for new stock to come in.

[haktek]

haha..i actuali wana buy another bike..but u-noe-who ltr will pek-pok-pek-pok at me..hahaha

 

aiya sell your bike get smaller one.. get extra cash back can taste your nasi minyak!!! hahaha

[Fredd]

1qn..do dey help u fix? or dey juz sell onli?

 

yester just bought my sbs brake pad for $18. i try neg abit but failed.

 

i ask him if MO 5 to 10 pcs got cheaper or not. he say No, normally bike shop take 20pcs also not much discount.

 

anyway he don have 671sq cermic already. but have another same model. [which i cant rember, tonight then post pic]

 

he still have 8 pairs of brake pad left. once sold out have to wait 3 mths for new stock to come in.

[Fredd]

im usin stebel horn..very good..its like car horn..fixin wise..errrr..i get shop to fix..hehe..lazy to get my hands dirty

 

has any one here got the hella horn? need any mod to install it? our just remove the stock n replace it?

I'm experiencing at least a couple of 'dangerously cutting in to my lane' cases every day...

[Fredd]

sell or neva sell oso date wun change..hahaha..

 

aiya sell your bike get smaller one.. get extra cash back can taste your nasi minyak!!! hahaha

[mjbs64]

yester just bought my sbs brake pad for $18. i try neg abit but failed.

 

i ask him if MO 5 to 10 pcs got cheaper or not. he say No, normally bike shop take 20pcs also not much discount.

 

anyway he don have 671sq cermic already. but have another same model. [which i cant rember, tonight then post pic]

 

he still have 8 pairs of brake pad left. once sold out have to wait 3 mths for new stock to come in.

 

Cheers to you ... $18 for a good brake pad similar to EBC in terms of performance.

 

8 pcs left ..... you guys better hurry to grab now ... cos it will be 7 left when I get one also for keep stock future use ... kekekekeke

[mjbs64]

1qn..do dey help u fix? or dey juz sell onli?

 

lol ... at Dickson rd is just a spare part shop lah and not workshop ....

Labour at UM around $5 .. I guess ... so $18 + $5 = $23 or most $25

at Motorworld with labour $35 after discount (actual $45) ...

at Unique Motor with labour EBC around $60 - $80 ... cry!!

[Fredd]

when u goin to e shop? can i tag along or u can help me buy rear brakepads

 

Labour at UM around $5 .. I guess ... so $18 + $5 = $23 or most $25

at Motorworld with labour $35 after discount (actual $45) ...

at Unique Motor with labour EBC around $60 - $80 ... cry!!

[revhappy]

lol ... at Dickson rd is just a spare part shop lah and not workshop ....

Labour at UM around $5 .. I guess ... so $18 + $5 = $23 or most $25

at Motorworld with labour $35 after discount (actual $45) ...

at Unique Motor with labour EBC around $60 - $80 ... cry!!

 

I doubt whether UM will do the labour for 5$. I think it will be 10$. I had called them up once and thats the quote I got. May be for SBT members 5$.

[Ah_Pet]

1qn..do dey help u fix? or dey juz sell onli?

 

they sell only.

[ORen]

[ATTACH=CONFIG]197878[/ATTACH]

 

chopped of the rear part of the gear lever which always bothered me when i rest my foot while riding..

 

Something's wrong with you.. who chops parts of their bike anyway ?

[ORen]

has any one here got the hella horn? need any mod to install it? our just remove the stock n replace it?

I'm experiencing at least a couple of 'dangerously cutting in to my lane' cases every day...

 

A few of us do. I installed them right after I bought Shadow because the stock horn seriously is like a bird chirping.. Zero efficiency.

With the Hella horns, it's a whole other story. I completely understand what you mean by "cases" of lane bullying: the hella horns will put the car or truck back into their lane !

Arthur, I don;t know which model you say is not loud enough, I'll take a pic of mine later this evening, i still have the box so Dejaxx can see. The one I use is good enough.

 

You need a relay and a fuse, and to know where to wire it, but it's fairly simple. Cookie Monster helped me do mine, but I'm sure many here can tell you where to tap the wires. Doesn't require anything special other than that, and again, it's very simple to install so you should definitely ditch the stock horn.

 

Speaking of horns & Cookie, I think if I'm not mistaken he put a car's horn on his Pulsar. Now that's a bit of a stretch, but everyone must leave him alone in his lane

[ORen]

Cheers to you ... $18 for a good brake pad similar to EBC in terms of performance.

 

8 pcs left ..... you guys better hurry to grab now ... cos it will be 7 left when I get one also for keep stock future use ... kekekekeke

 

Make that 6, I'm dropping there after work today to get me some.

The shop owner won't understand what happens to him, all of a sudden Pulsar riders invading his shop for brake pads :lol:

 

But I'm still stuck with my choices for the rear drum brake ...hmmm.. what to get, what to get.... I was really hoping sbs would have a model that could fit our P200 drum brake

[ORen]

I got a question guys about chain oil(lube) and rims : After rain or bike wash session, I always check my chain to see if i should oil it. I usually do in those 2 circumstances.

I don't put too much, I follow the advices found on the web on how to properly oil the chain.

 

Now, there's still something I haven't figured out how to fix: the oil splatter all over my rear wheel rim ! It's really annoying, it's like super black greasy marks/thin layer on my golden rims :cry:

I don;t think it's because I put too much oil, but could it be because I use that gel type of oil ? (Can't remember the brand.. it's a spay can with a small needle beak and when you spray it becomes like a gel, it's greenish in color).

If I used liquid chain lube, would it still splatter on the rear rim ?

 

Oh and what do you use to remove the oil/grease from the rims ? Because i tried everything, that Orange Degreaser, Wheel cleaners, and I use a thick brush. But the degreasers don't degrease anything, they barely liquefy the grease, and when I brush it just tends to put grease everywhere even more. I was thinking maybe I should wipe it off while the rim is still dry..anyone got some useful tip for this ? Can I use WD40 on painted rims ? (WD40 is my answer for anything I can't clean lol..)

[arthur_chan]

I got a question guys about chain oil(lube) and rims : After rain or bike wash session, I always check my chain to see if i should oil it. I usually do in those 2 circumstances.

I don't put too much, I follow the advices found on the web on how to properly oil the chain.

 

Now, there's still something I haven't figured out how to fix: the oil splatter all over my rear wheel rim ! It's really annoying, it's like super black greasy marks/thin layer on my golden rims :cry:

I don;t think it's because I put too much oil, but could it be because I use that gel type of oil ? (Can't remember the brand.. it's a spay can with a small needle beak and when you spray it becomes like a gel, it's greenish in color).

If I used liquid chain lube, would it still splatter on the rear rim ?

 

Oh and what do you use to remove the oil/grease from the rims ? Because i tried everything, that Orange Degreaser, Wheel cleaners, and I use a thick brush. But the degreasers don't degrease anything, they barely liquefy the grease, and when I brush it just tends to put grease everywhere even more. I was thinking maybe I should wipe it off while the rim is still dry..anyone got some useful tip for this ? Can I use WD40 on painted rims ? (WD40 is my answer for anything I can't clean lol..)

 

wd40 is ur answer, um's answer always petrol

 

imo, the lube will always spill, liquid spill more badly. on my rim it's easy to clean, chrome. one wipe n it's off, but the spoke hard to clean, so most of the time i never bother.

[arthur_chan]

Make that 6, I'm dropping there after work today to get me some.

The shop owner won't understand what happens to him, all of a sudden Pulsar riders invading his shop for brake pads :lol:

 

But I'm still stuck with my choices for the rear drum brake ...hmmm.. what to get, what to get.... I was really hoping sbs would have a model that could fit our P200 drum brake

 

why not do MO here n get 1 shot,

or like what i organize, gather all ppl go

[arthur_chan]

Arthur, I don;t know which model you say is not loud enough, I'll take a pic of mine later this evening, i still have the box so Dejaxx can see. The one I use is good enough.

 

You need a relay and a fuse, and to know where to wire it, but it's fairly simple. Cookie Monster helped me do mine, but I'm sure many here can tell you where to tap the wires. Doesn't require anything special other than that, and again, it's very simple to install so you should definitely ditch the stock horn.

i need to re route my wires cos i got something special to do.

i think we all got the same, frankly i feel the stock is loud enough, dont know if p200 uses a diff model, but should be the same. but after buying, i'm still happy, i get a slightly louder noise for a cheaper price.

if anybody want to ditch their stock horn, pass to me

 

Something's wrong with you.. who chops parts of their bike anyway ?

 

he meant the chop of the photo

[arthur_chan]

im usin stebel horn..very good..its like car horn..fixin wise..errrr..i get shop to fix..hehe..lazy to get my hands dirty

 

how much it cost a pair?

[revhappy]

wd40 is ur answer, um's answer always petrol

 

imo, the lube will always spill, liquid spill more badly. on my rim it's easy to clean, chrome. one wipe n it's off, but the spoke hard to clean, so most of the time i never bother.

 

Thats why I like the original pulsar set up of closed chain cover and standard chain. Standard chain is lighter than the o-ring chain in the new pulsars so better FC. The only advantage of the o-ring chain is the looks as it can be left open. But standard chain is also much cheaper.

[mfk74]

haha..i actuali wana buy another bike..but u-noe-who ltr will pek-pok-pek-pok at me..hahaha

 

aiya sell your bike get smaller one.. get extra cash back can taste your nasi minyak!!! hahaha

 

sell or neva sell oso date wun change..hahaha..

 

looks like we can hear wedding bell soon !!!!!:cheer:

 

Need SBT to escort or not during your big day!!!!:rolleyes:

[ORen]

Muc-Off have a wide range of cleaning product, with an emphasis on degreaser and chain cleaner. I saw that Motoworld is importing them (I believe the brand is UK made) - but I don;t know if I want to put lots of $$$ in something meant to end up in the sewers I like my cheaper Mustapha product better.

I forgot to check the prices of the chain cleaner and the degreaser from Muc-Off.

[revhappy]

[ATTACH=CONFIG]197878[/ATTACH]

 

chopped of the rear part of the gear lever which always bothered me when i rest my foot while riding..

 

I use the rear part of the lever to find neutral from 1st gear after stopping. The front part is not that precise while pushing up, too much force it will go to 2nd gear. Its easy to use both front and rear to make that precise tap to bring it to neutral.

[SC Gaban]

gimme urs uh..ur bike so fast..even my bike cnnt catch up..hehehehe

 

Fredd, u give me ur bike n I’ll know wat to do every weekend.

[SC Gaban]

Something's wrong with you.. who chops parts of their bike anyway ?

 

who chopped who? is d meat nice?