[Group] Singapore BAJAJ Team (SBT)

[ORen]

Yeah, on the expressway it's definitely different, we can "escape" and look for cocoons of space and not be bothered - try riding a bit in town on peak hours, you'll see it's a total different story.

Agree the important thing is to enjoy the ride and to get home safely, but even if I ride defensively all the time, sometimes the road cowboys just get to me... It's always better to be pacifist and be nice to others, but how difficult is it to hit the signal button when you want to turn ? Instead of acting like you're alone on the road..

 

Today's ride was particularly crazy, so I suppose it got me upset. The good thing about it is I decided to fix the camera on my bike. I've been lazy to do it, but today I realized its use. And it could be fun to document things like this:

 

Edited March 31, 2011 by O'Ren

[ORen]

@Fredd, Singaporeans are much much better compared to Aussies. Aussies are can start a quarrel in the middle of the road pull out a knife and stab you. The law there isn't even strict enough to deter those thugs.

 

That's the risk with any angry person anywhere in the world but Singapore lol...

[onlinepasar]

STEADY LAH FINALLY CAN JOIN U GUYS! just passed tp 30/03/2011 WOOTS anyone can advice where can i get a reliable shop to get my pulsar?

[mjbs64]

STEADY LAH FINALLY CAN JOIN U GUYS! just passed tp 30/03/2011 WOOTS anyone can advice where can i get a reliable shop to get my pulsar?

 

 

wah another Jurongster .. which area bro? ... kekekke

 

have a kopi together at nearby kopi tiam .. and we can talk about pulsar .. how?

name the place and time .. can?

 

wah I like terror only kekekekkee

 

anyway WELCOME bro!! ... kakaka

[Brandonwang]

STEADY LAH FINALLY CAN JOIN U GUYS! just passed tp 30/03/2011 WOOTS anyone can advice where can i get a reliable shop to get my pulsar?

 

Universal motor, bukit merah lane 1 buy buy buy

[Stylo]

http://184.72.239.143/mu/cb74168b-f12a-b841.jpg

 

Leaking like this

 

Don't worry follow step by step because is major leak>> Should be easy to find

1. Check any oil leak from oil drain plug? If Yes tighten the screw/change if spoil/need to retrack the hole.

2. Check any oil leak from gear shift shaft? If yes, then need to change the oil seal/shaft seal.

3. Open out air filter box see the leak is from that area. If there is oil clean it. Oil inside the air filter box because top up too much oil/engine tuning problem.

4. If all above OK. Then wash the bike from engine to below very clean. Open up 2 side cover ask the washer spray clean clean. Then see oil leak from where after maybe 1 or 2 day.

 

Hope to try and reply to us.

Edited March 31, 2011 by Stylo

[fircyber]

teach me, then i can go steal all the pulsar in sg.

 

edit: one thing about hot wire, is it possible to undo a handle bar lock?

 

Hint: try kicking the handle bar.

[ORen]

hows the shirt coming? i gave the rough price of making alr few posts before..

 

I'm following the logo lead and I'll be happy to make t-shirts once we have it, but can't we find cheaper ?

Ideally what I want us to do, is to raise some money by selling the t-shirts to our members. Let say the t-shirt will be 15-20 SGD, if we manage to make it somewhere at 10-15, it's worth the shot to raise money for our group, no ?

Maybe Sc_Gaban you can investigate in Malaysia where we could have some t-shirts done with embroidery for a good price ?

@mjbs64, can you please check the rates for that too with our Indo friends ?

 

I think if it's to make 1 or 2 t-shirts then SG is fine and the prices you got for us Speed are fine. But if we want all of us to get the same design and same t-shirt, it's worth looking for better rates, no ?

[SC Gaban]

last min. 2night me n uncle MJ planing going in jb 4 supper n pump (not to mention I crave for the steak n mutton soup.AAUUUUU!!!!). 11.30pm under SLE bridge. But not confirm yet. I finish my night class at 11pm but I stand by my passport anyway. Those who wish to tag along feel free.

[SC Gaban]

oren : "Maybe Sc_Gaban you can investigate in Malaysia where we could have some t-shirts done with embroidery for a good price ?"

 

done.

[arthur_chan]

Asus Transformer

 

[arthur_chan]

Hint: try kicking the handle bar.

 

can demo on ur bike?

[alvinyansg]

To ALL ....

 

 

COURTESY STARTS FROM HOME ... IT'S YOU THAT MAKE THE DIFFERENCE!! ...

 

For others it's their choice to be or not to be .....

 

Like in Transformers .... Optimus Prime best words

 

Ironhide: "Why are we fighting to save the humans? They are a primitive and violent race."

Prime: "Were we so different?"

 

Prime says,

"Fate rarely calls upon us at a moment of our choosing."

 

Prime says,

"We've witnessed your human capacity for war. It would absolutely bring more harm than good."

 

 

Megatron: "Why throw away your life so recklessly?"

Prime: "That's a question you should ask yourself, Megatron."

 

Prime says,

"You hold the key to earth's survival."

 

 

 

and many more ..... kekekekekekekekekekekeke

 

 

JULY BTMO watch it out ....... Transformers 3 will officially be released July 1st 2011. That’s final. hehehehe

 

30th Jun in M'sia in 3D...

[atipo]

Project No 1.

Finally mounted my shinnob sprockets & chain = DIY stye.

Tools required 1) Chan breaker 2) Full set of wrench 3) Lots of time & patience @ 55mins:)

Road test results;

1) From Yishun Ave 4 to Science Park II = +/- 26km. Via Mandai BKE-PIE-Clementi Underpass-AYE-GAP-Science Park II.

Verdict

1)Top end speed = +/- 125km/h.Rpm 7k = 90km/h. (Shinnob sprocket size 15/40).

Previously = +/- 140km/h. Rpm 7k = 105km/h. (Fabricated sprocket size 14/38).

 

2)Pick up = 0 to 80km/h = Rpm 6k 4th gear.

Previously = 0 to 80km/h = Rpm 5.5k 4th gear.

 

3)Was totally impressed with the smoothness of the ride; be it when pulling off from red lights or gunning the redline for top speed. The differrence was obvious.

But as expected, will lose top end speed due to sprocket ratio upsized. But, you gain some, you lose some. Loose some speed for smoothness of the ride; i'm happy with that. This is my own verdict & conclusion. I'm not paid or sponsored by Shinnob. Just my frank opinion.

Edited March 31, 2011 by atipo

[atipo]

Projcet No: 2.

Brake pump had worn out. Checked with Um, new set cost $45 w installation.

So, bought the master cyclinder major kit $22. Fix myself. It worked but for only 2days. checked & found the old brake pump cast had some cracks & was loosing compression & fluid = no front brakes.

Bought a Spark LC 135 brake pump RM35 , Spark LC135 brake lever RM 8. Brake fluid RM8. Total = RM51. (SGD 21.61)

DIY project.Fitted & tested = OK. Will try to do stoppies once the brake had bleed in...

[fircyber]

can demo on ur bike?

 

insure my ignition key set first then i demo u live.hehe

[speedaddict]

Atipo the DIY Man

[ORen]

Projcet No: 2.

Brake pump had worn out. Checked with Um, new set cost $45 w installation.

So, bought the master cyclinder major kit $22. Fix myself. It worked but for only 2days. checked & found the old brake pump cast had some cracks & was loosing compression & fluid = no front brakes.

Bought a Spark LC 135 brake pump RM35 , Spark LC135 brake lever RM 8. Brake fluid RM8. Total = RM51. (SGD 21.61)

DIY project.Fitted & tested = OK. Will try to do stoppies once the brake had bleed in...

 

Can we do a DIY stoppie session ? I wanna learn how to do these but never got the courage to practice by myself...

 

Can you post a pic of what the brake pump cast is ? Why did you have to get a new brake lever as well ?

[ORen]

Atipo the DIY Man

 

The guy has been riding 20 different bikes or so - At some point, you have to learn how to do things yourself instead of paying a mechanic, specially if you want to save money to get a 21th bike

To think it took me 4h to take out the headlight assembly and put it back, after doing a very basic wiring exercise...:pity:

[spaiduhz]

The guy has been riding 20 different bikes or so - At some point, you have to learn how to do things yourself instead of paying a mechanic, specially if you want to save money to get a 21th bike

To think it took me 4h to take out the headlight assembly and put it back, after doing a very basic wiring exercise...:pity:

 

Hear hear.

 

Its my opinion that everyone who rides a bike should be able to do an oil change, plug change, tighten chain, on their bikes, on their own.

 

Its the reason why a new bike is bundled with a standard tool kit. Its there to be used.

[spaiduhz]

Projcet No: 2.

Brake pump had worn out. Checked with Um, new set cost $45 w installation.

So, bought the master cyclinder major kit $22. Fix myself. It worked but for only 2days. checked & found the old brake pump cast had some cracks & was loosing compression & fluid = no front brakes.

Bought a Spark LC 135 brake pump RM35 , Spark LC135 brake lever RM 8. Brake fluid RM8. Total = RM51. (SGD 21.61)

DIY project.Fitted & tested = OK. Will try to do stoppies once the brake had bleed in...

 

Does it need an adapter? Ive had a suspicion that it may be a perfect fit for a while now.

[mjbs64]

Can we do a DIY stoppie session ? I wanna learn how to do these but never got the courage to practice by myself...

 

Can you post a pic of what the brake pump cast is ? Why did you have to get a new brake lever as well ?

 

 

yeah .. don't forget the 3 years he mastered the public transport too ... need him to show us how to do stoppies and wheelies with the public transport!! ..... kakakakakakakakakaa

[mjbs64]

Hear hear.

 

Its my opinion that everyone who rides a bike should be able to do an oil change, plug change, tighten chain, on their bikes, on their own.

 

Its the reason why a new bike is bundled with a standard tool kit. Its there to be used.

 

 

heehehe ...

 

for some they just loved to diy thingy and for some reasons too there are people who just don't like to dirty their hands ... so just let mechanic to do it for them .. once they sent their bike to the mech, they just sat one corner reading newspaper, or just simply finish their work on their lappy,... it's like a bossy feeling .... like you have a workers and let them do the job and paid them at the end of the month .... kekekekekke

 

... same like washing your bike lah .. some like to wash their own and some just sent to jb for bike wash ...

 

so basically .. it's one choice lah bro ... end of the day it's their satisfaction that's count ..... kekekekekekekee

 

 

optimus Prime says,

 

"Freedom is the right of all sentient beings." ......

 

 

cheers!

[alvinyansg]

heehehe ...

 

for some they just loved to diy thingy and for some reasons too there are people who just don't like to dirty their hands ... so just let mechanic to do it for them .. once they sent their bike to the mech, they just sat one corner reading newspaper, or just simply finish their work on their lappy,... it's like a bossy feeling .... like you have a workers and let them do the job and paid them at the end of the month .... kekekekekke

 

... same like washing your bike lah .. some like to wash their own and some just sent to jb for bike wash ...

 

so basically .. it's one choice lah bro ... end of the day it's their satisfaction that's count ..... kekekekekekekee

 

 

for me i think the best is balance of both

some things DIY some things leave to mech

for bike wash

sometims wash youself...

most of the time go JB wash(Lazy lah)

haha

[mjbs64]

to atipo .......

 

SALUTE & RESPECT TO YOU!!!!!!!

 

 

Optimus Prime says,

 

"Sometimes even the wisest of men and machines

can be in error."

 

Optimus Prime says,

 

"We lost a great comrade, but gained new ones. Thank you, all of you. You honor us with your bravery."

 

 

No Sacrifies No Victory!! .. kekekeke