[Group] Singapore BAJAJ Team (SBT)

[Lanzer]

Looks good.. but no one share room with me ley..

Lanzer u joining? The rest?

Didn't know they only allow CBF150's only for the trip cos I saw kano nick there, so thought they won't mind you join them.

Maybe you ask Nemesis, maybe he can organise a short trip to desaru for us......

How? Nemesis?

[Mrace]

Didn't know they only allow CBF150's only for the trip cos I saw kano nick there, so thought they won't mind you join them.

Maybe you ask Nemesis, maybe he can organise a short trip to desaru for us......

How? Nemesis?

 

*looks at Nemesis while sharpening a knife on a chopping board*

 

How Nemesis? When are u gona org a trip for us newbies?

 

Wah 1 shot desaru ah.. i havent even rode to msia..

[mjbs64]

confused: Just wondering.........

 

anybody know what exactly our pulsar resembles ? ...

 

check my avatar ....

[pokvin]

\m/!

 

tenchar

[Nemesis]

Didn't know they only allow CBF150's only for the trip cos I saw kano nick there, so thought they won't mind you join them.

Maybe you ask Nemesis, maybe he can organise a short trip to desaru for us......

How? Nemesis?

 

HUH ??!! they dun welcome pulsar ???!!!

 

 

*looks at Nemesis while sharpening a knife on a chopping board*

 

How Nemesis? When are u gona org a trip for us newbies?

 

Wah 1 shot desaru ah.. i havent even rode to msia..

 

u want har.... desaru road is trunk road leh... more dangerous than NSH leh... you sure ??

[Nemesis]

confused: Just wondering.........

 

anybody know what exactly our pulsar resembles ? ...

 

check my avatar ....

 

look like a transformer... or robot leopard. hahahahaha

[GoofRider]

Wanna check with the electrical experts here. If I wish to buy a LED signal lights, will it be pluck & play or I must mod or put something like resistor or something? I very very little about electrical stuffs… but I

Know LED bulbs use very little power…

 

anyway recently I change my tail light to those LED tail light but after a few hours it goes ‘kaput’… I tot it was my wiring but when I buy a new normal bulb it can work.

So wondering lah izzit the electric flow too much to the LED brake light that it goes kaput? Pls advice.

 

:dot: :dot:

[breadman]

confused: Just wondering.........

 

anybody know what exactly our pulsar resembles ? ...

 

check my avatar ....

 

such a sinister look! woohoo.. i wanna change my pole lights to green leh.. but too troublesome to remove the front headlight housing.. if not the eyes green hor.. chio!

[spaiduhz]

:dot: :dot:

 

Woah. You changed your tailboard from V2 to UG3? Radical.

 

Anyways the current required for LED lights are normally much lower than the 12v bulbs. Each LED bulb tends to be 0.5 volts. Keep adding it up in parallel series, and thats the required voltage for the tail light. Eg, 12 0.5v LED bulbs in parallel will require 6v of current. Too much voltage, and the light will glow much brighter, but it will burn out very fast.

 

You may require a step down transformer if you wish to continue using the LED tail light.

[SC Gaban]

just wondering, do our pulsars have power cut?

[joajas]

Wanna check with the electrical experts here. If I wish to buy a LED signal lights, will it be pluck & play or I must mod or put something like resistor or something? I very very little about electrical stuffs… but I

Know LED bulbs use very little power…

 

anyway recently I change my tail light to those LED tail light but after a few hours it goes ‘kaput’… I tot it was my wiring but when I buy a new normal bulb it can work.

So wondering lah izzit the electric flow too much to the LED brake light that it goes kaput? Pls advice.

 

Bro, does your led have a resistor on it, if not you need to add one to prevent too much current going through your led.

[joajas]

Woah. You changed your tailboard from V2 to UG3? Radical.

 

Anyways the current required for LED lights are normally much lower than the 12v bulbs. Each LED bulb tends to be 0.5 volts. Keep adding it up in parallel series, and thats the required voltage for the tail light. Eg, 12 0.5v LED bulbs in parallel will require 6v of current. Too much voltage, and the light will glow much brighter, but it will burn out very fast.

 

You may require a step down transformer if you wish to continue using the LED tail light.

 

Bro, actually it is the current in the circuit that kills the leds.

 

But because of the equation V=IR (Ohm's law), increase in voltage(V) causes increase in current(I).

 

Therefore Bro Goof should increase the resistance® so that current(I) remains within save value when voltage(V) increases.

 

To be on the safe side Bro Goof need to calculate base on 14V instead of 12V, that because when moving along, voltage is around the 13.5v to 14v region.

[joajas]

just wondering, do our pulsars have power cut?

 

Pulsars have rpm cut to protect the engine from going into self destruction mode.

 

Pulsars are meant to be a daily transport bike with excellent fuel consumption, so actually no need to bother whether there is any kind of power restriction.

[lindavw]

save some silicon for me hor Nemesis! I self collected the voltmeter liao.

 

 

 

you need to be present also! i need your help about the alarm wiring.

 

 

 

dont worry. i have never ride in with them before too. still need to wait a couple of months to do my new passport then can go in...

 

 

 

did you get caught crossing double white line?

 

 

Alarm wiring and voltmeter and hazard lights installation is totally diff things leh.

[lindavw]

Wanna check with the electrical experts here. If I wish to buy a LED signal lights, will it be pluck & play or I must mod or put something like resistor or something? I very very little about electrical stuffs… but I

Know LED bulbs use very little power…

 

anyway recently I change my tail light to those LED tail light but after a few hours it goes ‘kaput’… I tot it was my wiring but when I buy a new normal bulb it can work.

So wondering lah izzit the electric flow too much to the LED brake light that it goes kaput? Pls advice.

 

usually the ready made signal or tail light the resistor is already calculated.i dun see any possibility of the LED burning off. get back to ur supplier maybe something wrong wif the LED bulb instead.

unless u buy raw LED then DIY urself into a bulb then maybe u got the calculations wrong.

[lindavw]

just wondering, do our pulsars have power cut?

 

yes Pulsars and in fact all bikes in spore have power cut.

u 1 2 bypass it? can be done but risk burning away ur CDI.

[stanco]

Alarm wiring and voltmeter and hazard lights installation is totally diff things leh.

 

u so busy with work... i dun want to deprive you of sleep at night ma. so 1 day settle all the things better than i go DIY for voltmeter then find another time to meet you for the alarm ma.

[lindavw]

u so busy with work... i dun want to deprive you of sleep at night ma. so 1 day settle all the things better than i go DIY for voltmeter then find another time to meet you for the alarm ma.

 

DIY led by solar not me leh.

[GoofRider]

eh no lah.. still using V2 tail board.. just that i change bulb only.. i guess the LED bulbs is faulty... lor... sian..

 

anyway thanks for all your reply... Lindavw, Joajas and Spai_duhz...

 

 

[SC Gaban]

Pulsars have rpm cut to protect the engine from going into self destruction mode.

 

Pulsars are meant to be a daily transport bike with excellent fuel consumption, so actually no need to bother whether there is any kind of power restriction.

 

 

wow, self destruct? heavy....

 

anyhoo, thnxs 4 sharing d info.

[firefox87]

Hi I wanna buy a pulsar 200cc. I used to rode a WR200. Den it have a lot of problems so i sold it off. For 3 yrs I didnt ride a commercial bike. I do though, ride an SCDF firebike (2A) so that i won't lose touch. I wanna save money la. So thinking of buying a pulsar. Been reading about this thread a lot. Anyone can comment on the spark plug used? When do u usually changed? Thks

 

bro.. which station u from? spark plug change every 5000km. engine oil every 2000km. the rest not so important la. or just minor details which u can do before every long trip.

 

 

guys, that day u all go jb pump. i heard the fuel price drop again.. RM$2.30 liao..

 

correct mi if wrong

wah!! RM2.30?? HAPPY LOR!!

 

recommended mileage to change spark plug is 10,000 km

 

someone correct me if im wrong

not 5000km meh?

[GoofRider]

i change every 10k lor.. unless your pocket deep deep one..

[Mrace]

hey guys.. i see other thread hor all got org bike wash together..

 

a bit bo liao but lets take it a chance for gathering mah..

 

n hor my bike very dirty.. who wan help?

[breadman]

bro.. which station u from? spark plug change every 5000km. engine oil every 2000km. the rest not so important la. or just minor details which u can do before every long trip.

 

not 5000km meh?

 

dunno leh.. UM told me 10,000km then need to change spark plugs

[Mrace]

confused: Just wondering.........

 

anybody know what exactly our pulsar resembles ? ...

 

check my avatar ....

 

dun knw wor..

 

\m/!

 

tenchar

 

wats tenchar?

 

HUH ??!! they dun welcome pulsar ???!!!

 

 

 

 

u want har.... desaru road is trunk road leh... more dangerous than NSH leh... you sure ??

 

Not they dun welcome pulsar.. they only wan CBF150 de..

 

eh.. mai scare me hor.. we go somewhere nearer 1st la..

Here got a few newbie tourer right?

 

such a sinister look! woohoo.. i wanna change my pole lights to green leh.. but too troublesome to remove the front headlight housing.. if not the eyes green hor.. chio!

 

Then TP come n admire.. WAH REALLY VERY CHIO.. then give u a small gift?

 

i change every 10k lor.. unless your pocket deep deep one..

 

is spark plug ex?