[Group] Singapore BAJAJ Team (SBT)

[mjbs64]

Manick >

Speed got his at Ah Boy and installed it at UM when he sent for servicing.

Mine is Posh Faith brand bought at Motoworld .. super expensive lah...sigh!!!!

For helmet lock ... mine secured under my rear box since I'm lazy to DIY with additional bracket along the side of the bike. Sorry lah no picture to show. Like Alvin stated, can do it at the side since you are not using side boxes.

 

Good to hear you are ok .. really hate to hear this kind of news ... ride safe and take care bro! Cheers!

[khinwui]

SERVICE & SPARE PARTS AT UM

 

Servicing

1) Standard Package Servicing ......................................$6.00

 

Engine & Spark Plug

02) 1pc cap camshaft + 2 pcs 'O' ring: ............................. $35.00

03) 1pc diaphragm: .................................................. ....$25+5 for workmanship fees

04) 1pc Magneto gasket (for starter motor) : ....................$6.00

05) Wash + clean carburettor : .......................................$18.00

06) Engine holding bolt (long) ........................................... $8

07) Change Engine oil 1L ........................................$10.00

08) Change FS Mobil 1 Engine oil 1.2L ........................................$26.40

09) Denso spark plug (copper) .................................................. ....$6.50

10) NGK spark plug (copper) ..............................................$5.50

 

 

Brake, Clutch, Choke & Throttle

01) 1pc Rear Brake Shoe: .............................................. $18

02) 5pcs clutch spring (for starter motor): ........................$2.50

03) 5pcs bush for clutch (for starter motor): .....................$2.50

04) Clutch cable .................................................. ..........$16.50

05) Brake pedal .................................................. .............. $25

06) Brake Fluid + labour .................................... $12

07) Throttle cable ..............................$17

08) New set of choke……………………………………… ……….. $18

09) Clutch gasket .................. .................. 1pc $4 (need 2 pcs)

10) Centrifugal gasket ................................ $1 a pc

11) Cultch plate Kit set .................... $78 ( if I'm not wrong)

12) clutch lever...................$12

 

 

 

Wheels, Tyres, Chain and Sprockets

01) Rubber cap for chain case: .......................................$1.00

02) Front & Rear sprocket + Chain : ................................. $75

03) Front sprocket only (without labor) .............................$12.50

04) Rear sprocket only (without labor) ..............................$25

05) Sprockets & Chain P200 (1 set) ........................ $136

06) IRC rear tyre (P200) .................................................$ 75

07) Battlax rear & front tyre P200 .............................$210

08) Seal puntured tyre ..................... $5

09) Rubber Coupling Damper ............ $10

10) Duro Tyre Rear (P180) ...........................$65

11) Spray both rims (paint excluded) .................... $80 [1 spray can = $5, need 1 can per rim]

 

Electricals, Signals, Sensors and Horn

01) Signal light lens .................................................. .....$4.00

02) Whole signal light assembly (1 piece)............................$20.00

03) Bulb for fuel gauge/speedometer/tachometer (for ver 2) ..$2.00

04) Service starter motor assembly: ................................$15.00

05) Horn per pc .................................................. ................. $25

06) Head Light bulb ............................$8.50 [lookalike white light/P200] $7 [lookalike yellow]

07) Number Plate bulb ........................................ $2

08) Battery Dry Cell ...................$40.50

09) Temperature sensor .............. $12

10) starter motor........$60(second hand)$145(brand new)+labour fee $25

 

 

Accessories

01) Crash bar .................................................. .............$30.00

02) Kit Grommet sidecover......................................... .......$2.50

03) Latest Givi Monorack for top box ..................................$70 (+$10 labor)

04) RH footrest.......................................... ...................... $36

05) LH footrest .................................................. .............. $32

06) Mirror per pcs .................................................. ............ $20

07) Handle bar .................................................. ................... $36

08) Pillon footrest per set .................................................. ..... $13

09) Shield muffler .................................................. ............... $28

10) Weld metal pc on side stand ............................................... $15

11) Spray foot step panel and pillion grab holders (paint excluded)..$20

12) Install aftermarket front & rear fenders ................................. $60

 

 

Fork, Main Stand, Side Stand and Exhaust

01) SVC the fork.............................................. ................ $40

02) Weld exhaust Pipe P180: .................................................. $15.00 [Depends on how bad it is]

03) Weld exhaust pipe P200 ......................................$22 [Depends on how bad it is]

04) Exhaust gasket ........................... $3.50

05) Top up fork oil ...................$4

06) Weld main stand wif extension + barckets ............. $30

07) Steering cone set($33) + Ball bearing 1 set of 39pcs (Top 19pcs below 20pcs)($4) + Labour($25)............................$62

Edited October 30, 2010 by khinwui

[NoFishesAllowed]

OMG :/ sian...

um got fix horn??

i go they say cannot... cos the boss will like f them... cos they not suppose to mod pulsars

[Fredd]

hi guys...hw much to fix a box on our pulsars? i looked at e list n saw 03) Latest Givi Monorack for top box ..................................$70 (+$10 labor). does this come wif e box?

[revhappy]

Went to JB in the afternoon and filled 16.6 Ltrs of RON 95 at the Esso in Ah Gua Lane while coming back after the SG immigration, missed the turn to SLE and kept going straight on to BKE, then entered KJE and managed to exit and then come back on the same route back to SLE. I think about 20kms deroute. This is the second time it is happening to me

Nevertheless, Simply love to ride with a full tank up to the brim

Edited October 30, 2010 by revhappy

[revhappy]

hi guys...hw much to fix a box on our pulsars? i looked at e list n saw 03) Latest Givi Monorack for top box ..................................$70 (+$10 labor). does this come wif e box?

 

I think box +bracket will cost close to 200$. I bought a used Zeus 45L box from the forum for 20$ and then bought the bracket for pulsar from Ah Boy for 60$. So total cost just 80$.

[Fredd]

so e bracket is universal? as in..any brand of topbox oso cn use? or e bracket is onli specifically for 1 type of box?

 

I think box +bracket will cost close to 200$. I bought a used Zeus 45L box from the forum for 20$ and then bought the bracket for pulsar from Ah Boy for 60$. So total cost just 80$.

[fircyber]

so e bracket is universal? as in..any brand of topbox oso cn use? or e bracket is onli specifically for 1 type of box?

 

Yup braket is universal. Juz buy any box frm anywhre n fix it. I'm using 33litre givi point box

Edited October 30, 2010 by fircyber
typo error

[Fredd]

roger dat..thanks!

 

Yup braket is universal. Juz buy any box frm anywhre n fix it. I'm using 33litre gigi point box

[revhappy]

so e bracket is universal? as in..any brand of topbox oso cn use? or e bracket is onli specifically for 1 type of box?

 

Yeah, as @fircyber said bracket is universal. Every box comes with its own baseplate which is removable without any screws. Best thing is first select a box and you will get the base plate along with it. Then you can go to Ah Boy and carry just the base plate with you and when they fix the bracket, tell them to also fix the base plate to the brackets. Then you can come home and fix the box on top of it easily.

[fircyber]

@umpl, 135CC not enough for SG highways. Can you get this bike from India? It will be another hot seller like Pulsar.

http://bikeadvice.in/mahindra-mojo-300cc/

 

[ATTACH=CONFIG]180782[/ATTACH]

 

The mahindra look so masculine sia....hope someone bring in this bike to sg. Gona be my next bike when I get 2A

[Fredd]

any idea if a underseat rack for a spark would fit on a pulsar?

 

Yeah, as @fircyber said bracket is universal. Every box comes with its own baseplate which is removable without any screws. Best thing is first select a box and you will get the base plate along with it. Then you can go to Ah Boy and carry just the base plate with you and when they fix the bracket, tell them to also fix the base plate to the brackets. Then you can come home and fix the box on top of it easily.

[alvinyansg]

Just come bck from um.

1)change second hand starter motor=60buck+labour25.brand new cost 145buck.

2)clutch level for=12buck.(hard to get bck neutral,after change,much easier,but not super easier)

3)engine oil=10buck

total damage=107buck

waiting time is v long,total waiting time+service=3hour++,but definitely worth it.

now my bike v smooth,love e mechanic who service my bike,but dont know wat his name(his name ah long if i not wrong,i heard his supervisor call him ah long),v kind n honest mechanic,recommended to all.wil look for this mechanic next time if i service my bike again,lolz..

 

u change clutch lever or the gear pedal?

[alvinyansg]

hi guys...hw much to fix a box on our pulsars? i looked at e list n saw 03) Latest Givi Monorack for top box ..................................$70 (+$10 labor). does this come wif e box?

 

I think box +bracket will cost close to 200$. I bought a used Zeus 45L box from the forum for 20$ and then bought the bracket for pulsar from Ah Boy for 60$. So total cost just 80$.

 

so e bracket is universal? as in..any brand of topbox oso cn use? or e bracket is onli specifically for 1 type of box?

 

Yup braket is universal. Juz buy any box frm anywhre n fix it. I'm using 33litre gigi point box

 

roger dat..thanks!

 

Yeah, as @fircyber said bracket is universal. Every box comes with its own baseplate which is removable without any screws. Best thing is first select a box and you will get the base plate along with it. Then you can go to Ah Boy and carry just the base plate with you and when they fix the bracket, tell them to also fix the base plate to the brackets. Then you can come home and fix the box on top of it easily.

 

any idea if a underseat rack for a spark would fit on a pulsar?

 

you can get rack + zeus 45L box at UM for $180

or can get givi box from ah boy and rack from ah boy

bring down to UM to fix

labour $10 at UM

pulsar should be using this series of rack from givi/kappa

http://www.giviusa.com/Fitment-kits/Monorack/monorack-F---FL

this is the best fit rack for pulsars

[alvinyansg]

OMG :/ sian...

um got fix horn??

i go they say cannot... cos the boss will like f them... cos they not suppose to mod pulsars

 

hmmm

they do replace if you bring your own

maybe cos yours is the snail horn type they might not want to do

cause some of us here replace is the disc type...

[khinwui]

u change clutch lever or the gear pedal?

 

clutch lever,worn out abit,so it dint fully hold in the clutch.at 1st he suspect something inside the engine worn out(i forgot wat he said,the thing cost 24buck,and he said its a common thing result in gear hard to shif bck neutral),but after checking,the thing stil in good condition,end up change clutch lever n adjust clutch cable.

[alvinyansg]

clutch lever,worn out abit,so it dint fully hold in the clutch.at 1st he suspect something inside the engine worn out(i forgot wat he said,the thing cost 24buck,and he said its a common thing result in gear hard to shif bck neutral),but after checking,the thing stil in good condition,end up change clutch lever n adjust clutch cable.

 

ic

cause sound like hard to kick the pedal up to neutral

so thought is the gear pedal

good bike is smooth and shiok...

[khinwui]

ic

cause sound like hard to kick the pedal up to neutral

so thought is the gear pedal

good bike is smooth and shiok...

 

yea,love pulsar,but in term of power n speed,its a sad case for pulsar.fc is dame good,my working place only 7km from my house,full tank 800km+-,hard for me to visit petrol station now aday,lolz.

[khinwui]

ic

cause sound like hard to kick the pedal up to neutral

so thought is the gear pedal

good bike is smooth and shiok...

 

double post.

[alvinyansg]

yea,love pulsar,but in term of power n speed,its a sad case for pulsar.fc is dame good,my working place only 7km from my house,full tank 800km+-,hard for me to visit petrol station now aday,lolz.

 

power and speed can also be achieved by our pulsars

but your fc will have to suffer

so its a give and take situation

depends on how you want to do up your bike

[spaiduhz]

so um, there isnt anyone else here who has hit 99,999KM on their odometer?

 

after 3 years of faithfully serving me, i would really hate to accidentally miss a servicing. my milleage can get rather erratic, so i cannot rely on changing it every month. i'll definately hit over the 2500KM service mark before the month is up. changing oil every 2 weeks is overkill, i think.

 

i tried doing a search, and its not really helpful. makes me wish i grabbed a UG2 instead. less fuss. hit 99,999KM and the mechanical odometer will reset to 0 automatically.

 

if changing the ECU will change the reading of the odometer to 0, its worth considering.

[fircyber]

so um, there isnt anyone else here who has hit 99,999KM on their odometer?

 

after 3 years of faithfully serving me, i would really hate to accidentally miss a servicing. my milleage can get rather erratic, so i cannot rely on changing it every month. i'll definately hit over the 2500KM service mark before the month is up. changing oil every 2 weeks is overkill, i think.

 

i tried doing a search, and its not really helpful. makes me wish i grabbed a UG2 instead. less fuss. hit 99,999KM and the mechanical odometer will reset to 0 automatically.

 

if changing the ECU will change the reading of the odometer to 0, its worth considering.

 

Wah! U really travel a lot!

[fircyber]

Uncle mj, can I order 1 yellow sinnob sprocket for p180 ug3???how much? And do u hav order item called tire guard where it help to proctect my tires frm nail?

[Ah_Pet]

his nick is armani123sg

got my orange led strips from him

 

thanks. but i search his nick. found nothing related to led. seems like he removed all his thread and posting on it.

 

anyway anyone know ppl selling LED which can change muti color by using a few switches? my project need it to do project. thanks in advance

[mjbs64]

Uncle mj, can I order 1 yellow sinnob sprocket for p180 ug3???how much? And do u hav order item called tire guard where it help to proctect my tires frm nail?

 

UG3 is 4 holes sprockets ... you need also the heavy duty rubber coupling to have the your rear wheel and brake works wonder. However the rubber coupling is not under Sinnob order list but it is on the MO. Since we have not finalise yet the MO for Rubber coupling, you can join in for this MO. I will do the MO soon.

Msg to confirm and to make the payment to my account.

 

The Tyre Guard, you can get at Autobacs Bukit Batok but not sure at Ubi side. Can't recall the price though but you neeed 2 bottles since 1 bottle is for for 1 tyre.

 

 

Manick > If you are still interested with the Sinnob, pls let me know as both you and fircyber can share the $12 WU surcharge.