[Group] Club Yamaha XJR 400/1300 (Singapore)

[xjrredbull]

Yo,

 

Very quite le.

May issue of MCA out?

 

I have serviced my carb and tested past 120km/h, no problem.

 

yahooooooo.

yeahlah...its always am quiet around here...

powerupz to your mechs..

[xjrredbull]

Event: #8 Monthly Meet-Ups

Day: 3rd Saturday of the Month

Date: 17th May 2008

Meeting Point: Kembangan MRT (*Taxi Stand)

Time: 2030hours

 

Attendees:

1. xjrredbull & wife

2. yamamotomaniac & wife

3. xjrIzzac23 & gf

4. ayedrock & gf

5. aimmagic

6. abangsham & gf

7. xjrcoco & wife

8. ayed frenz

 

Then it was Bowling Nite later!!! Yamamoto is the winner hands down!!!

 

http://i257.photobucket.com/albums/hh229/yammiexjr/NgahMakanRaimah.jpg

 

http://i257.photobucket.com/albums/hh229/yammiexjr/ClubXJRLadies.jpg

[ayedrock]

Event: #8 Monthly Meet-Ups

Day: 3rd Saturday of the Month

Date: 17th May 2008

Meeting Point: Kembangan MRT (*Taxi Stand)

Time: 2030hours

 

Attendees:

1. xjrredbull & wife

2. yamamotomaniac & wife

3. xjrIzzac23 & gf

4. ayedrock & gf

5. aimmagic

6. abangsham & gf

7. xjrcoco & wife

8. ayed frenz

 

Then it was Bowling Nite later!!! Yamamoto is the winner hands down!!!

 

http://i257.photobucket.com/albums/hh229/yammiexjr/NgahMakanRaimah.jpg

 

http://i257.photobucket.com/albums/hh229/yammiexjr/ClubXJRLadies.jpg

 

http://i257.photobucket.com/albums/hh229/yammiexjr/SalWifeyYantiAmy2.jpg

 

Yesterday's meet up was great! My lamb chop was so hard i can hardly bite! Haha! Anyway the guy i brought along was my cousin, my 'shadow'. Hheehe!

[ayedrock]

Cleaned my knn air filter with the recharger kit n now i feel satisfied. Bike is good to go!!! Cost me 17 Bucks n its worth it!

[xjrredbull]

Yesterday's meet up was great! My lamb chop was so hard i can hardly bite! Haha! Anyway the guy i brought along was my cousin, my 'shadow'. Hheehe!

 

Cleaned my knn air filter with the recharger kit n now i feel satisfied. Bike is good to go!!! Cost me 17 Bucks n its worth it!

Now we know where & who to ask for to clean up our KNNs! hahahahahah! I kinda like ur cousin spark's FIAT paintwork!!!! POWERTheMakZ!

[Wolfener]

Sorry for not being able to make it on Sat... Look like you guys have lot of fun!

 

Happy125 - The Givi box look good. Have you fit it on your bike yet?

[xjrredbull]

Sorry for not being able to make it on Sat... Look like you guys have lot of fun!

 

Happy125 - The Givi box look good. Have you fit it on your bike yet?

 

Lotsa laughters & bowling bowl some of us over...hahahahahah....

happy125???where are u, Big Bro???

[ayedrock]

Now we know where & who to ask for to clean up our KNNs! hahahahahah! I kinda like ur cousin spark's FIAT paintwork!!!! POWERTheMakZ!

 

Oh no! Dun ask me to clean up all the knn user's air filter... Can ar but usually mechs charge 10 bucks rite? I charge $5... can? Haha! Cn 'pengsan' man... N yeah! ME too! Too bad mine is juz a small Fiat Yamaha sticker at the tail of my bike... anyway guyz, how long is the lifespan of our original air filter may i noe?

[xjrredbull]

Oh no! Dun ask me to clean up all the knn user's air filter... Can ar but usually mechs charge 10 bucks rite? I charge $5... can? Haha! Cn 'pengsan' man... N yeah! ME too! Too bad mine is juz a small Fiat Yamaha sticker at the tail of my bike... anyway guyz, how long is the lifespan of our original air filter may i noe?

 

will one million miles be enuf bro??? hahahahahaha....

[happy125]

Sorry for not being able to make it on Sat... Look like you guys have lot of fun!

 

Happy125 - The Givi box look good. Have you fit it on your bike yet?

 

 

 

Sat worked late lah.

 

The Givi box, still waiting for stock to come.

 

Anybody looking for top box, once side box installed, thinking of letting go the top box.

[xjrredbull]

Sat worked late lah.

 

The Givi box, still waiting for stock to come.

 

Anybody looking for top box, once side box installed, thinking of letting go the top box.

hmph....is yours new one big bro??

i kinda forget how it looked like...

[happy125]

hmph....is yours new one big bro??

i kinda forget how it looked like...

 

Yes I bought it new when I got the bike.

 

Kappa, 45 litre, I think.

[xjrredbull]

Yes I bought it new when I got the bike.

 

Kappa, 45 litre, I think.

 

oic...oic...selling/trading OR giveaway???

[happy125]

oic...oic...selling/trading OR giveaway???

 

For Sale cheap, cheap.

Must recoup some $$$$$

[happy125]

Bros,

 

I did posted sometime back where I have this "brrrrr.." fluttering sound from my bike, which seemed like coming from somewhere in front.

 

I have checked for loose connections and couldn't find anything.

 

This "fluttering" sound will appear somewhere between 2000 - 2200 rpm, and only on the move.

 

I read on the net where other bikes also experienced this at different rpm.

 

Suggestions given were to checked the head-light compartment, where there are those connectors which could be vibrating against the casing and to put some kind of insulator.

 

Tried that but no help.

 

I have been ignoring this for quite a while.

 

Yesterday I experimented with different tyre pressure.

Usually i did 36psi in front and 38-39 rear.

Well yesterday I did 42 at the rear and the fluttering sound seemed to disappeared and ride feel much better.

 

Another lesson learnt.

[xjrredbull]

For Sale cheap, cheap.

Must recoup some $$$$$

erm...how much u wanna recoup???

Bros,

 

I did posted sometime back where I have this "brrrrr.." fluttering sound from my bike, which seemed like coming from somewhere in front.

 

I have checked for loose connections and couldn't find anything.

 

This "fluttering" sound will appear somewhere between 2000 - 2200 rpm, and only on the move.

 

I read on the net where other bikes also experienced this at different rpm.

 

Suggestions given were to checked the head-light compartment, where there are those connectors which could be vibrating against the casing and to put some kind of insulator.

 

Tried that but no help.

 

I have been ignoring this for quite a while.

 

Yesterday I experimented with different tyre pressure.

Usually i did 36psi in front and 38-39 rear.

Well yesterday I did 42 at the rear and the fluttering sound seemed to disappeared and ride feel much better.

 

Another lesson learnt.

 

i wanna hear the sound...

[ayedrock]

Bros,

 

I did posted sometime back where I have this "brrrrr.." fluttering sound from my bike, which seemed like coming from somewhere in front.

 

I have checked for loose connections and couldn't find anything.

 

This "fluttering" sound will appear somewhere between 2000 - 2200 rpm, and only on the move.

 

I read on the net where other bikes also experienced this at different rpm.

 

Suggestions given were to checked the head-light compartment, where there are those connectors which could be vibrating against the casing and to put some kind of insulator.

 

Tried that but no help.

 

I have been ignoring this for quite a while.

 

Yesterday I experimented with different tyre pressure.

Usually i did 36psi in front and 38-39 rear.

Well yesterday I did 42 at the rear and the fluttering sound seemed to disappeared and ride feel much better.

 

Another lesson learnt.

Bro, i think my bike is also having the same 'bbrrrr' sound at the headlight area. Like a rattling sound but when i ride fast, the sound disappears... I tot it comes from the speedometer area... issit? Screws,nuts,bolts no tightened maybe? Anyway, wanna ask u guyz, can i transfer a tyre from a s4 to our xjr? Cos i'm buying myself 1 pair of tyres from a s4 rider. Measurements shudn't be a prob rite?

[xjrredbull]

Bro, i think my bike is also having the same 'bbrrrr' sound at the headlight area. Like a rattling sound but when i ride fast, the sound disappears... I tot it comes from the speedometer area... issit? Screws,nuts,bolts no tightened maybe? Anyway, wanna ask u guyz, can i transfer a tyre from a s4 to our xjr? Cos i'm buying myself 1 pair of tyres from a s4 rider. Measurements shudn't be a prob rite?

 

erm...s long s its 120/110 in fronts & 150/160 shud be ok lah...

i tot i told u so, already?? good luck bro..

[happy125]

Bro, i think my bike is also having the same 'bbrrrr' sound at the headlight area. Like a rattling sound but when i ride fast, the sound disappears... I tot it comes from the speedometer area... issit? Screws,nuts,bolts no tightened maybe? Anyway, wanna ask u guyz, can i transfer a tyre from a s4 to our xjr? Cos i'm buying myself 1 pair of tyres from a s4 rider. Measurements shudn't be a prob rite?

 

Ha, I am not alone.

I have checked all that, even raba, raba under the tank, nothing loose.

I am keeping my ear open wide to hear if that brrrr sound is back.

 

If if come back, I think I'll get ear-plug!!!!!

[dreco]

Ha, I am not alone.

I have checked all that, even raba, raba under the tank, nothing loose.

I am keeping my ear open wide to hear if that brrrr sound is back.

 

If if come back, I think I'll get ear-plug!!!!!

 

you guys fixed the wind shield right....? isit leaning against the speedo meter? If you guys noticed i have my wind shield attached with a mounting tape(sponged double side tape) where it contacts to the speedo meter.. Why the brr...sound is because the speedo n rev meter is joined to a center piece which is den secured to two bolts which has a thick piece of rubber which acts as shock absorbers for the meters....if you noticed that if you guys hit an uneven road the meters will start bouncing...But when on the move when i explained about revtec product i mentioned that i could feel my tank vibrate is at 6-8 rpm or when moving off...Why the vibrate?? valve opens..the petrol consumption is vaccumed and mixed together with air when moving off and when final valve is open is when hit the throttle hard giving it more compression forcing more air to get thru and thus the vibration occur..try my conclusion.... coz i realise that this theory on my trip to mersing then....the brr sound only started when i had the wind shield fixed on...

 

For those who dont have windshield than its the keys or mayb loose plastic to plastic contact....

 

[happy125]

you guys fixed the wind shield right....? isit leaning against the speedo meter? If you guys noticed i have my wind shield attached with a mounting tape(sponged double side tape) where it contacts to the speedo meter.. Why the brr...sound is because the speedo n rev meter is joined to a center piece which is den secured to two bolts which has a thick piece of rubber which acts as shock absorbers for the meters....if you noticed that if you guys hit an uneven road the meters will start bouncing...But when on the move when i explained about revtec product i mentioned that i could feel my tank vibrate is at 6-8 rpm or when moving off...Why the vibrate?? valve opens..the petrol consumption is vaccumed and mixed together with air when moving off and when final valve is open is when hit the throttle hard giving it more compression forcing more air to get thru and thus the vibration occur..try my conclusion.... coz i realise that this theory on my trip to mersing then....the brr sound only started when i had the wind shield fixed on...

 

For those who dont have windshield than its the keys or mayb loose plastic to plastic contact....

 

 

 

Ahhh... the brrrr is back.

 

I had this brrrr even without the windshield.

The vibrating sound you mentioned above is when you really open up throttle, right?

That brrrr sound is much louder then my brr sound.

My brrr sound is not that loud.

 

It appear if you go steady at 2000-2200 rpm, but if you throttle fast, its not there.

 

Really puzzling me where the heck its coming from!

[dreco]

Ahhh... the brrrr is back.

 

I had this brrrr even without the windshield.

The vibrating sound you mentioned above is when you really open up throttle, right?

That brrrr sound is much louder then my brr sound.

My brrr sound is not that loud.

 

It appear if you go steady at 2000-2200 rpm, but if you throttle fast, its not there.

 

Really puzzling me where the heck its coming from!

 

how bout your iu unit? is it in contact to the meter? or you also can check that part where throttle cable is linked to the carb...pull the throttle the cable will pull lever infront of carb...there is a screw there which may loosen itself....

 

did the sound even came before u serviced carb...?

[happy125]

how bout your iu unit? is it in contact to the meter? or you also can check that part where throttle cable is linked to the carb...pull the throttle the cable will pull lever infront of carb...there is a screw there which may loosen itself....

 

did the sound even came before u serviced carb...?

 

Alamak, I think the sound was there since first day I got the bike.

[hs400]

hi can any xjr riders help me solve my bike problem...how come my xjr after replace cone bearing,the handle bar still feel shaky and vibrate when riding...already went back to motorshop and retighten the cone bearing..feel ok after the first 2 week after tightened...but now the fault came back agian..so what should i do now???

[Blackie21]

hi there, am just curious, how much wld a used xjr13 cost and are there any out there?