[Q&A] SBF CB400 Official Q&A Thread 2009 (PLS ASK YOUR QUESTIONS HERE!)

[Ah Pek]

anyone knws?

 

Black chroming rims?..not sure about that but if you have seen glossy black rim, that's bekuz likely its spray painted with enamel glossy black paint with a good coat of acrylic.

[aeros]

Hi Guys, need help looking for handle bar that is higher level than normal. where can i get one?

[Iceachilles]

anybody knows how to remove those sticker strains without damaging the paint job? My fuel tank cap used to have those stickers but after many years it came off and left a ugly sticky strain. Tried washing but cannot and I used screw driver to slowly removed but accidentally scrapped the paint off. Any help? Thank you

[Ah Pek]

anybody knows how to remove those sticker strains without damaging the paint job? My fuel tank cap used to have those stickers but after many years it came off and left a ugly sticky strain. Tried washing but cannot and I used screw driver to slowly removed but accidentally scrapped the paint off. Any help? Thank you

 

 

Use Benzine from "Ronson" (Yello tin) or "Zippo" (black tin) to soaked and neutralised it and used your thumb with a cloth to rubbed it out. Its those 'fuel' that is use for liquid zippo cig lighters. Available almost anywhere like your neigbourhood mama shop.

[Iceachilles]

Use Benzine from "Ronson" (Yello tin) or "Zippo" (black tin) to soaked and neutralised it and used your thumb with a cloth to rubbed it out. Its those 'fuel' that is use for liquid zippo cig lighters. Available almost anywhere like your neigbourhood mama shop.

 

Thanks Ah Pek. Will go find those item and try.

[Nabil Dopey]

Black chroming rims?..not sure about that but if you have seen glossy black rim, that's bekuz likely its spray painted with enamel glossy black paint with a good coat of acrylic.

 

normal chrome i mean...any1 knws?

[Nescafe]

[Q] How much does a side ferring cost for S4 ?

[dragonforce]

[Question]

few weeks back my speedo and odo meter didnt work.. after riding a few km the speedo starting working again. i went to workshop a few days ago to change battery, after changing, same problem. my mech told me speedo sensor spoil need to replace.. this morning my speedo started working again.

could it be anything that's loose? or the speedo sensor is really faulty and time to replace it?

[Ah Pek]

[Question]

few weeks back my speedo and odo meter didnt work.. after riding a few km the speedo starting working again. i went to workshop a few days ago to change battery, after changing, same problem. my mech told me speedo sensor spoil need to replace.. this morning my speedo started working again.

could it be anything that's loose? or the speedo sensor is really faulty and time to replace it?

 

Its always easy to have 'proble' solve by replacing new parts and a time saver and less headache but at the expense of your $s.

 

B4 you part with your $s unnecessarily, why not open up meter and check first..provided if you know where that sensor is. You are right...may it's loose or dirty. Get WD40 to spray clean the connector to it and dried it wif a cloth and test again. This is likely since it happened "randomly". Could be bad wiring too but that depends on how old your bike is.

[dragonforce]

Its always easy to have 'proble' solve by replacing new parts and a time saver and less headache but at the expense of your $s.

 

B4 you part with your $s unnecessarily, why not open up meter and check first..provided if you know where that sensor is. You are right...may it's loose or dirty. Get WD40 to spray clean the connector to it and dried it wif a cloth and test again. This is likely since it happened "randomly". Could be bad wiring too but that depends on how old your bike is.

the problem is, i dunno where is the sensor! haha.. heard from mech alot of time needed to change it cos its below the carb or something like that.. and its $95 for changing it..

[tiku]

the problem is, i dunno where is the sensor! haha.. heard from mech alot of time needed to change it cos its below the carb or something like that.. and its $95 for changing it..

 

urs spec1?.. tt time i change for my spec 1 is 100plus plus, forgt the exact price.. 95 is cheap liao.. ya, they need to remove the carb...

[dragonforce]

urs spec1?.. tt time i change for my spec 1 is 100plus plus, forgt the exact price.. 95 is cheap liao.. ya, they need to remove the carb...

oh icic.. wow $100+ ex leh.. but now its working again.. dunno should i change or not..

[Burnt]

Hi, if any1 know Spec II rpm at 70km/hr? According to my friends spec 1 and 3, at 4.5k rpm 70km/hr, 5K rpm 80km/hr. But mine 70km/hr is at 5K rpm already. when 100km/hr, already 6.3~6.4K rpm, open Vtec already.. Is this normal to Spec 2? any 1 to advise? or is it due to tuning of carb?

 

helping a fren ..

[Nabil Dopey]

heyy guys...need help here....

why does the bike stall when im moving?

i open trottle then suddenly my bike stalled...

im on top gear...

does anyone knws why?

[Mizarahi]

Hi hi.

Can a vtec1 exhaust end can fixed onto a verson s exhaust?

[Ah Pek]

heyy guys...need help here....

why does the bike stall when im moving?

i open trottle then suddenly my bike stalled...

im on top gear...

does anyone knws why?

 

At what speed and rpm?

[Ah Pek]

Hi hi.

Can a vtec1 exhaust end can fixed onto a verson s exhaust?

 

 

Cannnnnnnnn....need $s!

[matkental]

[Q] Hi guys can recommend me a shop at kaki bukit area which has a labour charge of

[d3an_cain]

[Q] Hi guys can recommend me a shop at kaki bukit area which has a labour charge of

 

can try bikeworks @ sun li industrial..i did mine there.. or if u 1, some of the bros here can install for u less than $20.. but nt me la..hehehe

 

find a guy wif nick funky chicken.. he may help u..

 

http://www.singaporebikes.com/forums/showthread.php?t=189851&page=8

[d3an_cain]

any 1 noes where can get 2nd hand meter assembly? scrapyard which location?

[cyr]

Anyone can recommend a shop and price range for touch up for engine casing the silver and plack part as the paint is chipping off as well as to powdercoat the silver parts like the forks and the pillion assembly. I dont want the regular spray paint as well

 

much appreciated!

[matkental]

can try bikeworks @ sun li industrial..i did mine there.. or if u 1, some of the bros here can install for u less than $20.. but nt me la..hehehe

 

find a guy wif nick funky chicken.. he may help u..

 

http://www.singaporebikes.com/forums/showthread.php?t=189851&page=8

 

Thanks Mr. Superman, you've been most helpful.

My friend fixed his 2-way alarm there at Bikewerks also, 20 bucks.

Hahaha will try to recce ard that area first.

[cyr]

Anyone can recommend a shop and price range for touch up for engine casing the silver and plack part as the paint is chipping off as well as to powdercoat the silver parts like the forks and the pillion assembly. I dont want the regular spray paint as well

 

much appreciated!

 

 

anyone knows?

[Burnt]

hi all .. wads the difference btw dyno jet kits n kenzo jet kits ?

dyno jet kit include dyno run ? wads in dyno run ? price wise ?

[d3an_cain]

Thanks Mr. Superman, you've been most helpful.

My friend fixed his 2-way alarm there at Bikewerks also, 20 bucks.

Hahaha will try to recce ard that area first.

 

hahaha...so u figured person behind my nick eh..:angel:

gd luck bro...

i still considering the tank bra from auntie la..

cos i used to putting tank bag n auntie 1 no secure point for tank bag.