SBF Tmax Cafe

[anric79]

i never been riding a scooter before.

 

let say u are in a speed of 90kmph and we want low gear to move quickly out of a danger , we close throttle and open throttle again ?

 

how do we adjust the gear , is it by playing ard with throttle ?

[hachi]

i never been riding a scooter before.

 

let say u are in a speed of 90kmph and we want low gear to move quickly out of a danger , we close throttle and open throttle again ?

 

how do we adjust the gear , is it by playing ard with throttle ?

U dont open and close just full bore the throttle......

[Sesshou]

It's easy once u get a hang of it. The space are quite tight in there.

 

As for the pole light it's at a corner sometime block by the wire harness. Carefully pull the rubber area holding the light or pull the wire (careful don't pull too hard on the wire or you may cause some damage to the wire). And last of all do it slowly, I drop my bulb twice into the housing and have to remove the whole headlight to get it out.

 

Happen to me once also, drop the pole light in the casing but manage to retrive it with a stick and some doublesided tape.

[RayNg]

Happen to me once also, drop the pole light in the casing but manage to retrive it with a stick and some doublesided tape.

 

Haha lucky you. Mine dunno drop where have to remove the housing than it drop out.

[HelmetBOX1605198525]

anyone interest in ram mount? reservoir mount only.. 40..

[chili]

There's a Tmax 10' currently selling at Loois Motor. Low mileage and well taken care of by the previous owner.... Asking $17k otr....

[taihin]

http://i64.photobucket.com/albums/h187/jackyeng/tmaxaccessories.jpg

 

Tmax 500 Accessories!

http://www.singaporebikes.com/forums/showthread.php/318202-Tmax-500-Parts-amp-Accesssories.

[sleepoo]

t10. easy to change. headlight, also easy.

 

need remove the front cover isit? or stretch ur hand up to search around?

[chili]

http://i64.photobucket.com/albums/h187/jackyeng/tmaxaccessories.jpg

 

Tmax 500 Accessories!

http://www.singaporebikes.com/forums/showthread.php/318202-Tmax-500-Parts-amp-Accesssories.

 

All have already.....

[Max out]

All have already.....

 

If i never remember wrongly that you are not riding tmax liao please keep the comment to yourself thanks

[0yuan0]

need remove the front cover isit? or stretch ur hand up to search around?

 

No need to remove anything, just main stand turn handlebar. Slide you hand and feel.

[dddesmonddd]

Hi guys, i've just collected my tamx last friday. As i have been riding sportsbike all this while, the handlebars feels REALLY light, initially was wobbling all the way to the petrol station. After a day of riding, what i can say is the handling was really smooth, never felt as comfortable upon approaching a corner. but run in period really sian! Overall tmax is here to keep!

[sleepoo]

No need to remove anything, just main stand turn handlebar. Slide you hand and feel.

 

Hahaha ok..I will try... My wires all tied to the brim sia...like all

Squeeze together like that...

 

Yah run in sucks...tiring and slow....

[leo_rider]

Hi guys, i've just collected my tamx last friday. As i have been riding sportsbike all this while, the handlebars feels REALLY light, initially was wobbling all the way to the petrol station. After a day of riding, what i can say is the handling was really smooth, never felt as comfortable upon approaching a corner. but run in period really sian! Overall tmax is here to keep!

 

haha. can meetup next time for kopi alrd.. and free time, go for some dist clocking can liao. from east ride to west den go back to east. lol

[vai]

haha. can meetup next time for kopi alrd.. and free time, go for some dist clocking can liao. from east ride to west den go back to east. lol

 

Organize one soon bro! Heh.

[anric79]

hi all tmax riders,

 

I realize front and rear tyre rim are blocked by disc plates and especially the rear wheel blocked by conveyor belt and disc plate too, how u all guys pump tyre air ?

 

do u all use the esso or shell tat long metal rod to pump or u all go caltex pump ( caltex using tat lookalike bicycle pump tat thing.)

[anric79]

Hi guys, i've just collected my tamx last friday. As i have been riding sportsbike all this while, the handlebars feels REALLY light, initially was wobbling all the way to the petrol station. After a day of riding, what i can say is the handling was really smooth, never felt as comfortable upon approaching a corner. but run in period really sian! Overall tmax is here to keep!

 

hi dddesmonddd,

where did u buy ur tmax, new brand or second hand? is it the latest model? and how much on the road and how old are you , i consider the insurance factor too.

[chili]

If i never remember wrongly that you are not riding tmax liao please keep the comment to yourself thanks

 

 

this forum is free to all to post..So a previous owner of a Tmax can't post here?? I think u better keep the comments to urself... btw (it's remembered correctly)

Edited September 4, 2011 by chili

[sexyh]

hi all tmax riders,

 

I realize front and rear tyre rim are blocked by disc plates and especially the rear wheel blocked by conveyor belt and disc plate too, how u all guys pump tyre air ?

 

do u all use the esso or shell tat long metal rod to pump or u all go caltex pump ( caltex using tat lookalike bicycle pump tat thing.)

 

When I had my Tmax I got the tyre inlet valves changed to the 'L type' and face them to the right side of the Tmax. That made inflating both tires very easy anywhere. I think less than $50 including installation.

[Max out]

this forum is free to all to post..So a previous owner of a Tmax can't post here?? I think u better keep the comments to urself... btw (it's remembered correctly)

 

I did not mention anything about cannot post here. In singapore is a free country you can post here or do what you want. But please think i would like to find aftermarket parts too just because you post all have then what are you thinking. And thanks for the spelling check if you take it in to heart then i have nothing to say...

[vai]

hi all tmax riders,

 

I realize front and rear tyre rim are blocked by disc plates and especially the rear wheel blocked by conveyor belt and disc plate too, how u all guys pump tyre air ?

 

do u all use the esso or shell tat long metal rod to pump or u all go caltex pump ( caltex using tat lookalike bicycle pump tat thing.)

 

Bro rear tire no issue. Pump from right hand side of e bike, ie exhaust side. Front one a bit tricky though. For myself, I just place e inlet at e bottom and insert e hose from on top.

[dddesmonddd]

haha. can meetup next time for kopi alrd.. and free time, go for some dist clocking can liao. from east ride to west den go back to east. lol

 

 

If got time sure! hahaha too comfortable im afraid i'll slp on the way back from west to east! but still gd idea, wanna get this run in done over with and find out what this 500cc can do!

[dddesmonddd]

haha. can meetup next time for kopi alrd.. and free time, go for some dist clocking can liao. from east ride to west den go back to east. lol

 

 

If got time sure! hahaha too comfortable im afraid i'll slp on the way back from west to east! but still gd idea, wanna get this run in done over with and find out what this 500cc can do!

[dddesmonddd]

alamak double post, how to delete away?

[hagacalvin]

alamak double post, how to delete away?

 

Juz edit will do.