[Group] SBF Yamaha Spark135

[Ddz]

hi fellow spark rider. would like to ask why my bïke when I was riding at 90 like that my bïke seems like no power . what is the cause? cdi?

[kurarensu]

airfuel screw is on the left side rite? got screws, Bottom LHS or upper RHS?

4 stroke r so hard to set

 

on the left side of our bike got this triangle piece right?

on the triangle piece got this hole right?

 

How to do it: ( to know where is the Pilot Air screw, see chapter 3:11 of the T135 service manual)

- warm up your engine

- after warm up, turn off

- turn the PILOT AIR SCREW clockwise to until its fully close (this is called IN, because the screw is going IN)

- now mark the point where it was fully closed (that will be your mark to know if you 360 degrees or 1 turn)

- now adjust it to 2 and 1/4 turns counter clockwise (this is called out because you are making the screw going OUT)

 

http://www.yamahat135.com/forum/files/air_fuel_idle_screw_168.jpg

 

readup @ here:

http://www.yamahat135.com/forum/viewtopic.php?t=119

 

i learn my frm there

 

hi fellow spark rider. would like to ask why my bïke when I was riding at 90 like that my bïke seems like no power . what is the cause? cdi?

 

try:

 

- washing your carb

- changing your engine oil

- changing your spark plug

- changing your air filter

 

if it stil dosent work.. your bike really needs a checkup

Edited April 19, 2009 by kurarensu

[IdaaNdi]

Hey thanks for the help bro Kura... the site u gave really has alot of info on e t135... alread Download the manual already

I try the 2 1/4 setting as posted fm the author... bro kura i assume ur bike stock, how many turns ur at? color of ur plug?

 

The chapter 3:11 of the T135 service manual... izit our owners manual? mine's until chapter 3:9 only...

Edited April 19, 2009 by IdaaNdi

[kurarensu]

Hey thanks for the help bro Kura... the site u gave really has alot of info on e t135... alread Download the manual already

I try the 2 1/4 setting as posted fm the author... bro kura i assume ur bike stock, how many turns ur at? color of ur plug?

 

The chapter 3:11 of the T135 service manual... izit our owners manual? mine's until chapter 3:9 only...

 

i'm on 2 1/2 turns, my bike not stock

 

plug color? i yet to take out and see.. i dont have the sparkplug wrench.. and i'm LAZY..!!

[mdarto]

Guys, i just went to Auntie shop and i saw them selling sprayed coverset for $290.

 

Anybody changed their coverset from there? If yes, hows the workmanship of the resparyed coversets?

[IdaaNdi]

i'm on 2 1/2 turns, my bike not stock

 

plug color? i yet to take out and see.. i dont have the sparkplug wrench.. and i'm LAZY..!!

 

juz checked my plug...im getting greyish, dry on te tip of the plug... am i running lean here?

[IsphytonZ]

well...

main suppliers/brand for aftermarket rear suspensions currently only gazi & yss for sparkie...

there are two different kinds of suspension for both brands..

1) fully adjustable

2) not fully adjustable

 

currently im on stock suspensions....

dunno how to give feedback

 

Thx bro for the info

[sparkz83]

Guys, i just went to Auntie shop and i saw them selling sprayed coverset for $290.

 

Anybody changed their coverset from there? If yes, hows the workmanship of the resparyed coversets?

 

u can oso try wingyap ma they oso selling $199cash&carry install another $30 ......dun knw good or not cos me using orginal coverset......

[abhorer]

Hey thanks for the help bro Kura... the site u gave really has alot of info on e t135... alread Download the manual already

I try the 2 1/4 setting as posted fm the author... bro kura i assume ur bike stock, how many turns ur at? color of ur plug?

 

The chapter 3:11 of the T135 service manual... izit our owners manual? mine's until chapter 3:9 only...

 

t135.com, damn good website!! Got to know about the tuning for the air fuel mixture from there too!!

[abhorer]

i'm on 2 1/2 turns, my bike not stock

 

Most definitely your bike not stock, speedo display already bling bling!! haha

[kurarensu]

Guys, i just went to Auntie shop and i saw them selling sprayed coverset for $290.

 

Anybody changed their coverset from there? If yes, hows the workmanship of the resparyed coversets?

 

hmm.. jb selling $400rm.. u do the maths.. exchange rate about 2.37 now..

 

juz checked my plug...im getting greyish, dry on te tip of the plug... am i running lean here?

 

shld be slightly lean, u can try increasing the turns of your air/fuel by another 1/8 or so to see again.. if stil cant means you gotta change your jets..

 

i also lazy to take out my sparkplug lehs.. cos i dont have the tools..!! grrrr

 

Most definitely your bike not stock, speedo display already bling bling!! haha

 

lols.. each blingbling adds 0.1HP u know.. so must bling up the ride MORE!!

[lthongs]

hmm anyone knows how much is it to take out my exhuast and then spray it? Cos rusty. prefer to sent to shop cos quite busy these days to DIY le...

[Ddz]

hi fellow spark rider. would like to ask why my bïke when I was riding at 90 like that my bïke seems like no power . what is the cause? cdi?

 

 

could it be carb ? cause done engine oil , filter . thank for the info

[kurarensu]

u gotta try then know.. sometimes it's sparkplug also..

[mdarto]

Wingyap got sell the resprayed coversets? at the AMK outlet or?

 

Thought of going into JB to buy but lazy to go so far. Btw, is those coversets in JB workmanship good?

[IdaaNdi]

At last... my backfiring problems have been rectified... Caused by the air cut valve...

I just T-loaned a voltage stabilizer, hmm...not bad,plug n play, a BIT smoother acceleration n lesser engine brakin...

those got extra $100++ to burn, dis is e stuff u mite wanna get for ur sparkie

Edited April 20, 2009 by IdaaNdi

[IdaaNdi]

Wingyap got sell the resprayed coversets? at the AMK outlet or?

 

Thought of going into JB to buy but lazy to go so far. Btw, is those coversets in JB workmanship good?

 

Jb n wym ready-sprayed coversets quality n workmanship shld be the same most prob same supplier... its juz the hassle whether u want to go tru customs with the coversets...

[rocksteady]

just sold my spark today, wheeeee...

[kurarensu]

IdaaNdi: what's e air cut valve?

 

rocksteady: sold? then what's next.. stil got balance goodies frm ur bike?

[y2kredbull]

Selling my KNN air filter for Spark135.Bought from Unique for $95.Selling for $80.Less than 2 mths old.Reason for selling: Not goin to use airbox for my coming mod.

Edited April 22, 2009 by y2kredbull

[scorpion1322]

hello..where i can get genuine x1r rear brake disc set??n how much??

[kurarensu]

original? go hong leong buy loh..

[rocksteady]

IdaaNdi: what's e air cut valve?

 

rocksteady: sold? then what's next.. stil got balance goodies frm ur bike?

 

nw have gilera mah hahaha, got some goodies left but its all reserved

[rocksteady]

hello..where i can get genuine x1r rear brake disc set??n how much??

hmm im selling mine but tiz guy ask to reserve, if he aeroplane me then i contact u aite

[rokoshuo]

hi guys ,wanna know which shops do respray of fairings.. i wanna zeng my bike until swee swee! exterior only la haha..thx in advance ..

 

250 SGD dollars, Whole Fairings, Inclusive of Fairings too from malaysia. Which means they give u the new fairings too. Sports Advertisments designs.