-=BabyBlade=-(CBR)

[MaTrIx87]

Originally posted by s!AoG!Na@March 27, 2007 12:21 am

hmm...since when did i bring my sp dwn to PG? i was tinking of tt but heard many of my frens buang at there due to common factor of SP's weak suspension...

 

hey i still newbie in tis thread, hope to get lots of guidance from u all Lao Jiaos...hehehe

sry but is ur bro myxilplix coz i cant help but notice tt the 250 looks the same

[ANR Impex]

Originally posted by darren_soh86@March 25, 2007 06:32 pm

wah bros~ i m gg nuts.. every mth my blade this spoil, that one wear out, this one leaking, that one broken~!

 

pek chek to the point i wanted to sell it off this morning.. even the ad was posted.. held back last min..

 

haiz. my coolant water pump leaking... was quoted 90+ for the pump.. add workmanship oso dunno how much liao.. haiz.

 

aniware to rec for me to change it?

Go Planet, cheap and good (the catch? There's a queue!). Or Bikeworkz, run by Joseph and his ex Planet mech Ah Beng. Both shops' reputation are known to be very steady, tackle only your problem and won't ask you to change unnecessary parts.

 

Avoid 'cheap' shops with lots of bad comments posted all over SBF. Cheap but don't solve problem also end up more ex, this is especially so for older bikes.

[ImPeRzA]

Originally posted by KeMoZ@March 26, 2007 06:33 pm

ani of u guys noe whether insurance company offer installments?

coz i heard of that cheme before... anione?

bro ur yoshi sold?

[bobson87]

hi guys. been reading the thread for a while, but seldom post la. would like to find out if any of u guys noe how much is the cost of the front rim for cbr4?

[godfire]

hmm....no monthly meeting in this baby blade family?

[godfire]

hmm....no monthly gathering in this baby blade family?

[genyue]

My speedometer will twitch sometimes (meaning the needle is like trembling, clockwise and anti-clockwise), for about 1 or 2 seconds then it will stop or the twitching momentum will reduce.

 

e.g. from 155 km/h go to 175 km/h, then go back to 155 km/h, and then to 175 km/h and so on in a very fast motion until it eventually stops.

 

Is this normal because the bike is old already or there is a problem with my bike?

[killeddie]

Hi Tronicans,

 

Can ask which shop you did your re-wiring for the bike? My CBR also starting to face problems with charging and the hi/lo beam switches liao. Sianz there goes my $$ again...Thanks!

[siAoGiNa]

Originally posted by M@+r!X@March 27, 2007 05:01 am

sry but is ur bro myxilplix coz i cant help but notice tt the 250 looks the same

hmmm sorry dun tink he got tis nick here...and he sold his rs250 long ago le...n the last time i saw the rs250 is last yr during 8th August at Kent Ridge PArk...OMG the owner buang until left onli the tail whiCh is the Number 3 there. The rest is all race fairings.....WastEd!

[Tronicans]

Originally posted by killeddie@March 27, 2007 03:12 pm

Hi Tronicans,

 

Can ask which shop you did your re-wiring for the bike? My CBR also starting to face problems with charging and the hi/lo beam switches liao. Sianz there goes my $$ again...Thanks!

I did it at HKL.. Ah keong did it.

less than 4 hrs...

 

I only did the wire harness for L model

Other things i listed earlier i did em on seperate occasions.

[Tronicans]

Originally posted by genyue@March 27, 2007 01:03 pm

My speedometer will twitch sometimes (meaning the needle is like trembling, clockwise and anti-clockwise), for about 1 or 2 seconds then it will stop or the twitching momentum will reduce.

 

e.g. from 155 km/h go to 175 km/h, then go back to 155 km/h, and then to 175 km/h and so on in a very fast motion until it eventually stops.

 

Is this normal because the bike is old already or there is a problem with my bike?

Hi regarding your prob with the meter, i know its kinda irritating to see your speedo twitch when you jus wanted to test your top end. Its just that your speedo has run out of tune for its age....

 

I had similar encounters when my speed was nearing 160km/h.....

I tried replacing the speedo cable. the white washer at the spocked end(front), But stil din't help.

 

Finally i decided to replace my whole speedo. Just the speedo. THEN....

It solved the prob. my needle on speedo states a very clear speed reading even way thru the 180km/h mark.

 

Another reason for me to change the speedo, the surface of my old speedo has a melted waxing causing the display to be unclear.

 

Price of speedo $160. Chong aik. Install DIY.

[jin_meng]

Originally posted by Tronicans@March 27, 2007 09:17 pm

Hi regarding your prob with the meter, i know its kinda irritating to see your speedo twitch when you jus wanted to test your top end. Its just that your speedo has run out of tune for its age....

 

I had similar encounters when my speed was nearing 160km/h.....

I tried replacing the speedo cable. the white washer at the spocked end(front), But stil din't help.

 

Finally i decided to replace my whole speedo. Just the speedo. THEN....

It solved the prob. my needle on speedo states a very clear speed reading even way thru the 180km/h mark.

 

Another reason for me to change the speedo, the surface of my old speedo has a melted waxing causing the display to be unclear.

 

Price of speedo $160. Chong aik. Install DIY.

yo bro just asking. do you think it is possible to put cbr600's speedo unit on our cbr400?

[revoZ]

Originally posted by honam24@March 27, 2007 03:43 am

Sorry , correction over here. It should be 5500 Rpm travelling at 90km/h at gear 6th, 100km/h was at 6200 Rpm

 

 

for me if im not wrong...on gear 6th, 100km/h my rpm was 7000....does tis mean sumthing is wrong with my bike??

[Tronicans]

Originally posted by jin_meng@March 27, 2007 09:49 pm

yo bro just asking. do you think it is possible to put cbr600's speedo unit on our cbr400?

 

wat is the purpose or putting that meter? is it analogue?

[Tronicans]

Originally posted by revoZ@March 27, 2007 10:06 pm

for me if im not wrong...on gear 6th, 100km/h my rpm was 7000....does tis mean sumthing is wrong with my bike??

Not really something wrong with your bike... mayb cos your spocket size may differ, cold be the work of prev owner, for better acceleration change bigger front spocket.... Mayb.

[jin_meng]

Originally posted by Tronicans@March 27, 2007 10:52 pm

wat is the purpose or putting that meter? is it analogue?

it has a digital speedo read out cum analog tacho. and it is very nice compared to stock

[ImPeRzA]

Originally posted by jin_meng@March 27, 2007 11:30 pm

it has a digital speedo read out cum analog tacho. and it is very nice compared to stock

sure will b nice. digital haha! i sure will b interested.

[honam24]

Originally posted by revoZ@March 27, 2007 10:06 pm

for me if im not wrong...on gear 6th, 100km/h my rpm was 7000....does tis mean sumthing is wrong with my bike??

Might be the case of previous owner downsize spocket.

 

Stock should be 15 front / 39 behind

 

Front down one size = Back up Three Size

[honam24]

Originally posted by ImPeRzA@March 28, 2007 12:03 am

sure will b nice. digital haha! i sure will b interested.

More accurate than analogue

 

[Tronicans]

Originally posted by honam24@March 28, 2007 02:08 am

More accurate than analogue

 

 

but may not b v acuurate...

usually digi meter for big bikes are specially calibrated for each make and engine displacement. esp those sensor operated. Unless using speedo cable.

 

i ve tried a few aft market digi speedo, using cable. BUT never big bike's speedo...

So far good. You may wanna try KOSO

[jin_meng]

Originally posted by Tronicans@March 28, 2007 07:07 am

but may not b v acuurate...

usually digi meter for big bikes are specially calibrated for each make and engine displacement. esp those sensor operated. Unless using speedo cable.

 

i ve tried a few aft market digi speedo, using cable. BUT never big bike's speedo...

So far good. You may wanna try KOSO

i see.. i have such an idea bcos it's very hard to find digital speedo integrated with analogue tacho. a few pages back someone was asked a supplier in the states that if he was getting 10 pieces of the unit, what's the cost. reply was US$200 excluding installation of cos. after that, there were no updates on the speedo/tacho unit liao.

 

there's a trail tech unit which is digital speedo and tacho. but the bar graph for the tacho reaches only 12k rpm.. it is readable until 20k rpm but only in numerical form which i think is very hard to read.

 

i'll ask my bikeshop when i drop by one of these days.

[hafiz84]

hi all... anybody here gt stuff 4 blade to sell..??

[KeMoZ]

ImPeRzA

the yoshi pipe still avail...

u can msg me at 82687182 if ya` interested aite..

[ImPeRzA]

Originally posted by KeMoZ@March 28, 2007 06:41 pm

ImPeRzA

the yoshi pipe still avail...

u can msg me at 82687182 if ya` interested aite..

ya bro i interested. but nt soon. coz i using money for a new spraywork first. if u can sell u sell bah. till then i will ask u ^^

 

tks

[Tronicans]

Originally posted by hafiz84@March 28, 2007 02:28 pm

hi all... anybody here gt stuff 4 blade to sell..??

You looking for wat kinda stuff?

 

i gt a spare used radiator fan motor and fin....