[Archived - 2007] DIY SESSION (Hazard light and Horn)

[Quiet Guy]

Originally posted by tweakmax2@February 12, 2007 05:37 pm

anyone know how to make both signal light on like S4 ?

can try PM Mark Ng, think he is going to organising another hazard light DIY soon in other bike community.

 

CHeers..

[J.C]

Any one know how to install a voltmeter to the ignition key wiring DIY

Will appreciate that someone can show rhe steps

 

Thanks

[Guest @h_püi™]

Originally posted by J.C@February 24, 2007 12:14 am

Any one know how to install a voltmeter to the ignition key wiring DIY

Will appreciate that someone can show rhe steps

 

Thanks

hum.... atually is a black and green wiring which you can find it at the left chrome cover or inside your headlight...

 

black wire (positive)

green wire (Negative)

 

normally ppl tag the wire locate inside the headlight...

[J.C]

Thanks,

I found that I will need a "L" bracket to fix onto the bike, sometime like the one for fixing the IU

Where can I get it

 

Thanks

[Guest @h_püi™]

Originally posted by J.C@February 25, 2007 02:35 pm

Thanks,

I found that I will need a "L" bracket to fix onto the bike, sometime like the one for fixing the IU

Where can I get it

 

Thanks

the bracket for fixing IU?

can get from LAB at $8 mount onto the side mirror one.

[J.C]

Thanks ,

i got a metal plate with holes drill along at Ah boy. Have to DIY to make it a "L" bracket

 

Thanks brother

 

[Guest @h_püi™]

Originally posted by J.C@February 26, 2007 07:57 pm

Thanks ,

i got a metal plate with holes drill along at Ah boy. Have to DIY to make it a "L" bracket

 

Thanks brother

 

welcome... so bro, you does your grounding le on your bike? sry 4

[J.C]

Originally posted by Ah_pui@February 26, 2007 11:25 pm

welcome... so bro, you does your grounding le on your bike? sry 4

Grounding not done yet.

 

volt meter install on bike n will post a picture soon after I managed to upload.

 

Thanks

[Davedevil]

just wanna know anyone living in the east have a spare bosch relay willing to let go?

[J.C]

Volt meter install om the bike

 

http://www.picturesky.com/albums/userpics/12788/thumb_IMG_0020.JPG :cheer:

[Guest @h_püi™]

Originally posted by J.C@March 05, 2007 11:29 pm

Volt meter install om the bike

 

http://www.picturesky.com/albums/userpics/12788/thumb_IMG_0020.JPG :cheer:

bro, got larger pic to share? can't see anything....

[J.C]

Bro, this is the one

Enjoy

http://www.picturesky.com/albums/userpics/12788/normal_IMG_0019.JPG

[fisherian]

eh.may i ask.wats the volt metre for?

[Guest @h_püi™]

Originally posted by fisherian@March 23, 2007 03:45 pm

eh.may i ask.wats the volt metre for?

a volt meter is to keep track of your batt level of your bike...

 

it will also tell whether your batt is it charging or the batt is going to be replace(not charging)

 

so by installing your voltmeter... when you on igition of your bike, it will tell you 12V and when you start your bike... when you open your throttle it will show 13.5V

 

having these two condition, it will tell you that your batt level of your bike is good...

 

having a volltmeter, it will save you from push start as u can track your batt level.. and when batt can't charge up you can head down to motorshop and have your batt replace or maybe the charging coil or rectifier is not working...

 

ppl who install voltmeter, normal for those who install lots of lighting or maybe sound system... or maybe for accessories purpose...

 

But beware of thief who stole voltmeter also...

[fisherian]

oh.thanks alot bro.its quite useful i think.but i am sure theives nowdays everything also will stun.my P plate was being cut off even though i screwed it to my nos plate the back.i just installed some lightning on my bike.i think it wont eat up too much battery.so maybe a volt metre will be very handy to me for now.anyway, your red lightning is really nice bro.and the things and stuffs you put and do to your bike is really amazing. SALUTE!

[Guest @h_püi™]

Originally posted by fisherian@March 23, 2007 04:10 pm

oh.thanks alot bro.its quite useful i think.but i am sure theives nowdays everything also will stun.my P plate was being cut off even though i screwed it to my nos plate the back.i just installed some lightning on my bike.i think it wont eat up too much battery.so maybe a volt metre will be very handy to me for now.anyway, your red lightning is really nice bro.and the things and stuffs you put and do to your bike is really amazing. SALUTE!

:cheeky:

 

no la.. as for the voltmeter there is two kind.. one is LED indicator.. using light to determine your voltage level...

 

that is waterproof and small... mostly won;t kana stun by other ppl..

 

the other one is you saw b4 your post..

 

that one is cool but can;t withstand to vibration... for some of the brand

[fisherian]

haha.all right.but with a voltmeter.it looks more cool.thats my opinion.

 

i am going to put air horn next month when i get my pay.haha.my horn like damn soft.i horn the drivers or people crossing road or what.they like never notice, like dont even care i honk like that.

[Guest @h_püi™]

Originally posted by fisherian@March 23, 2007 05:09 pm

haha.all right.but with a voltmeter.it looks more cool.thats my opinion.

 

i am going to put air horn next month when i get my pay.haha.my horn like damn soft.i horn the drivers or people crossing road or what.they like never notice, like dont even care i honk like that.

air horn?

 

you better think twice... is illegal on the road... unless you mean those electric horn that is louder...

[Davedevil]

electric horn also some not approve must check the decibels of the horn.

[hippo]

Originally posted by Davedevil@March 24, 2007 01:24 pm

Hi brothers of PK

please help if any one have any circuit diagram of how to diy the hazard warning unit

many thank

[hippo]

Originally posted by hippo@May 09, 2007 08:01 am

many thank i got the circuit diagram :cheer: