Yamaha TZM 150 Riders

[Blahhh]

Helo guys, stumbled onto this topic whilst searching for some stuff in the forums. Think it's pretty interesting for u guys especially.

 

http://www.singaporebikes.com/forums/showthread.php?t=67341

[imben]

got another thread is steven lim bought himself a goldwing. hahas

[supafly]

go to agent in sg abt d same price as d ones they say original in msia. sumtimes u can get cheaper. as u buy direct from agent. there they buy frm agent got mark up price lar of cos. u can try united or auto at rowell dere... but if u guys want truly original parts.. den go to d main agent at paya lebar there lar. hahahkz! but beware...... d journey there is bumpy n sandy... n since it opens during office hours, its gona be hot hot hot.... n if ur tp-phobic... better not go... alot of tp bikes just outside d counter. muahahahahah!

 

im thinking abt a gath next mth....

[hellsfury]

For those who riding krr, sp, TZM or 2-strokers, i have found a gd deal for top overhaul going at only $195.(RXZ is $150) This includes changing of new

piston

carb washing and tuning

engine oil change

coolant flush

gaskets

chain tightening

spark plug

Replace piston ring

Service valves

Polish block

Polish cylinder head

and checking of ur bike. Only genuine parts are used and they will show it to you.

Y am i promoting them? i think they r really gd and i bargained with them to come out with this package for the benefit of most 2B riders who r STUDENTS working part time. Hope this will help ur wallets. cheers!

btw if wanna change other stuff, just ask them n remember to bargain

This is as cheap as it gets unless u r willing to go Ah gua lane

 

Blk 1017 Yishun industrial park A #01-262

Brother Motors Servicing(The sign board says San Tar Wielding)

[nd_danial]

if do the same at jb would cost abt RM290..

[Blahhh]

 

Blk 1017 Yishun industrial park A #01-262

Brother Motors Servicing(The sign board says San Tar Wielding)

 

Bro, this is the shop run by Ah Beng & Ah Tat, rite?

[hellsfury]

nd_danial: yes jb is cheap, but are they using geniune parts? also, the shop i recommended wud be more convenient for those who feel malaysia is out of the way or dangerous.

i also did state

"This is as cheap as it gets unless u r willing to go Ah gua lane"

 

 

Blahhh:yupz its them now got another mech called ah di also. haha actually it all started when i told him some motordiam priced it at $XXX, then he was fedup cos listed out to me all the prices of stuff he took directly from his suppliers and told me he can do it cheaper n better. If any1 can find a cheaper n better job in sg that does wad i listed, pm me and i will go see if its true. if its true, i'll go force the price as low as possible.

Wad MATTERS most is that WE the consumers get the best goods at the best prices. Cheers!

[MiN_MiN]

ic, original still the best.

 

I have search island wide already.. no more original handle bar selling.. Somemore the one i need is right hand side de.. Got found 1 from auto cycle, but it's left side.. Now i am headach on the handle bar.. Coz no handle bar, my bike cannot do anythihng..

[nd_danial]

As for original parts, best to do it in singapore. but i think the mechanics in jb are more skilled..

[ginzzz]

hie 2 all broz of tzm riders.... im ginz ... bin having my m almos 4 yrz... im new 2 this forum but as much i can help, i can answer ur q... thanx... hope 2 join outing nex tym but no promiz aitt.... hie again

[ginzzz]

Guys,

 

After getting new rear disc plate, new brake pad, new sprocket n chain still got the problem of the brake pad incontact with the disc plate (meaning my rear wheel cant have a smooth or spin freely). Its like applying a slight brake light that n cause my disc plate to heat up very fast when riding?? Can anyone tell me how to rectify it? Btw have anyone heard of a chain better than o ring.. I heard of the new S ring n stainless steel chain.. Any comments about this?

 

oic... in tht case u shud check ur bearin....

[MiN_MiN]

As for original parts, best to do it in singapore. but i think the mechanics in jb are more skilled..

 

Ya.. I am repairing my bike at local bikeshop as i need to claim against the other partie's insurance..

[supafly]

minmin u shld just get d local ones or d time being.. its not so expensive also right i tink?

[imben]

go to agent in sg abt d same price as d ones they say original in msia. sumtimes u can get cheaper. as u buy direct from agent. there they buy frm agent got mark up price lar of cos. u can try united or auto at rowell dere... but if u guys want truly original parts.. den go to d main agent at paya lebar there lar. hahahkz! but beware...... d journey there is bumpy n sandy... n since it opens during office hours, its gona be hot hot hot.... n if ur tp-phobic... better not go... alot of tp bikes just outside d counter. muahahahahah!

 

im thinking abt a gath next mth....

 

next month i no bike already, hahas

[imben]

Ya.. I am repairing my bike at local bikeshop as i need to claim against the other partie's insurance..

 

minmin since is claim one just claim original handle bar lo, cannot?

[supafly]

she cannot find original handlebars. i think u can order frm dem right? hav u tried paya lebar dere? at hong leong?

[nd_danial]

bro supafly, u got pm

[MiN_MiN]

minmin u shld just get d local ones or d time being.. its not so expensive also right i tink?

 

 

I dun think i am getting the local one at the time being.. As my left side of the handle bar is original de.. If the right side i get is local made or wad, the alinement will be affected i tin.. Hmm.. Bo bian lor.. Still waiting..

[QuoVadis]

wan sold his bike already uh i heard?

[RempitburnOut]

min min..mayb i can check for u from my fren...coz his rxz uses tzm handle bar..if im not wrong he change to original rxz...i ask him whether he still got the handle bar or not...

[khaitronic]

anyone got spare tzm buble visor to sell cheap?

Cause want to try first wheter can fit my bike or not thanks...

[RempitburnOut]

anyone got spare tzm buble visor to sell cheap?

Cause want to try first wheter can fit my bike or not thanks...

 

aiyah bro..nvr say earlier...i juz throw awayfew days ago sia my 2 wks old bubble after change racing bubble. if not can gif u free..

[khaitronic]

aiyah bro..nvr say earlier...i juz throw awayfew days ago sia my 2 wks old bubble after change racing bubble. if not can gif u free..

 

 

Alamak...wasted man:cry: ...anyone else...

[Zai TZM]

hey TZM riders... i just got my tzm 3 days ago.. but i seem to get this problem when my RPM cant hit over 5 and it's kinda irritating when u trying to go over it starts farting.. anyone have the same prob b4? is it the carborator setting ? enlighten me pls.. thanks guys..

hope u all can give some comments..

[ginzzz]

hey TZM riders... i just got my tzm 3 days ago.. but i seem to get this problem when my RPM cant hit over 5 and it's kinda irritating when u trying to go over it starts farting.. anyone have the same prob b4? is it the carborator setting ? enlighten me pls.. thanks guys..

hope u all can give some comments..

 

it cud b carborator.... bt s wat i know mostly its ur valve opening n closing problemz.... hmmm any way, u juz got it 3 days ago.... y not send back 4 checking.... ???