Filming my ride

[jayz]

 

this is what it will look like if u mount on the chin of the helmet area

[Forestfly]

 

this is what it will look like if u mount on the chin of the helmet area

 

Nice! Like RPG view

[yongchin]

Ya the video also very clear. What camera is that?

[Forestfly]

Got my GoPro video up @ 720 60fps I think is the best setting for general usage. Now left with the mounting

 

[lycan]

Got my GoPro video up @ 720 60fps I think is the best setting for general usage. Now left with the mounting

 

 

Invest in Ram mount.

 

http://Www.gpscity.com

 

Sent from my GT-N7000 using Tapatalk 2

[naim]

Got my GoPro video up @ 720 60fps I think is the best setting for general usage. Now left with the mounting

 

 

Nice bike! Where is ur cam mounted in that vid? I tink sportsbike if use chest mount is the nicest. Can see some of the gauge as well as the road.

[Forestfly]

Invest in Ram mount.

 

http://Www.gpscity.com

 

Sent from my GT-N7000 using Tapatalk 2

 

Thanks! They have alot of mounts indeed, was thinking of the suction cup onto the tank but scare will fall off due to the vibration :thumbup:

 

Sent from Samsung S3 using Tapatalk 3

[Forestfly]

Nice bike! Where is ur cam mounted in that vid? I tink sportsbike if use chest mount is the nicest. Can see some of the gauge as well as the road.

 

Thanks! I actually tried on the shoulder onto my bag coz i have seen some of those adventures man on youtube, they mounted the cam on the bag which is quite stable with walking pace however not so good during riding :banghead:

 

Sent from Samsung S3 using Tapatalk 3

[Lighteden]

Got my GoPro video up @ 720 60fps I think is the best setting for general usage. Now left with the mounting

 

 

Nice bike! a bit unstable it seems.

[Forestfly]

Nice bike! a bit unstable it seems.

 

Thanks bro, still doing research for the mount to minimize vibrations

[noobielameo]

Thanks bro, still doing research for the mount to minimize vibrations

To minimize vibration, you most likely need to mount on solid surface. Use a suction cup on your tank and tether(tie) it to your handlebar?

[xue ling]

Thanks bro, still doing research for the mount to minimize vibrations

 

i mount my hero 2 on top of my helmet.. i also initially thought of mounting on the tank with the suction cup but scared that i will drop off while riding

[Forestfly]

To minimize vibration, you most likely need to mount on solid surface. Use a suction cup on your tank and tether(tie) it to your handlebar?

 

I have seen a few guys on the road, they mounted their cam on the ff, quite cool!

http://bikerlawblog.com/media/blogs/wind/goprohelmetcam4.jpg

[type G]

Hi Guys, just like to ask if anyone use those in car camera before? i have an existing Blackvue and since i am removing it from my car, how can i possibly install in on the bike? i am looking at in stalling on to those maxi scooter. Besides mounting on helmet? is there anyway we can install and us the bike battery to run the

camera.

 

Please do advise.

 

Thank you

[Forestfly]

i mount my hero 2 on top of my helmet.. i also initially thought of mounting on the tank with the suction cup but scared that i will drop off while riding

 

Bro, can I check if your Gopro 3M adhesive strong enough to hold the cam or extra glue or screw required?

[xue ling]

Bro, can I check if your Gopro 3M adhesive strong enough to hold the cam or extra glue or screw required?

 

no additional stuffs required. the GoPro 3M adhesive tape itself is strong enough. btw i using the curve mount

[xue ling]

oops.. dbl post

Edited January 7, 2013 by xue ling

[Forestfly]

no additional stuffs required. the GoPro 3M adhesive tape itself is strong enough. btw i using the curve mount

 

Okay thanks many! I will try the side helmet and suction cup mount. Pray hard won't drop

[noobielameo]

Okay thanks many! I will try the side helmet and suction cup mount. Pray hard won't drop

No worries, these tape are made for environnement like this. Usually people mount on top helmet because it is centered and it mount on side, you can feel the wind resistance pulling your helmet to one side at high speed.

[alvinyansg]

Okay thanks many! I will try the side helmet and suction cup mount. Pray hard won't drop

 

thought of trying ram mount system?

can mount on reservoir, tank etc...

[naim]

Okay thanks many! I will try the side helmet and suction cup mount. Pray hard won't drop

 

if worried, just tether it to ur helmet in case it drops. i run a small string wif the gopro casing, then tie it up to the inside of the helmet (loop it round one of the cheekpad buttons). i have to use sidemount as my helmet is a flip-up. dont really feel much resistance to one side. probably will la if going super highspeed (max in sgp i tried is ard 110).

[danielling1981]

http://i.imgur.com/LREBX.jpg

 

If u notice the little red thing near the white cloth area. That's my tether. I just grab any lanyard (Those your office, company may issue to u) and secure it to my camera. =D But the 3M Velcro is tough. The only time it drop was when i adjust and the edge of the velcro caught my glove. 1 time only and i ve been using since aug 2012

[Forestfly]

Thanks for all the advises bros! One thing I'm worried about the vibrations from my ride is definitely hell. So maybe the best for me will be on the helmet =)

[crankcase]

Mine's a flip up too. I've been wondering if it's possible to mount on top and still not obstruct the visor when it flips up. I have a feeling it should be possible, but can't be sure since I don't have a camera yet

 

Still trying to decide whether to go with gopro or the other rd32ii that has been mentioned earlier. Among other things, I would want one where the mount can be adjusted to change the camera angle, especially if mounting on helmet.

 

if worried, just tether it to ur helmet in case it drops. i run a small string wif the gopro casing, then tie it up to the inside of the helmet (loop it round one of the cheekpad buttons). i have to use sidemount as my helmet is a flip-up. dont really feel much resistance to one side. probably will la if going super highspeed (max in sgp i tried is ard 110).

[naim]

Mine's a flip up too. I've been wondering if it's possible to mount on top and still not obstruct the visor when it flips up. I have a feeling it should be possible, but can't be sure since I don't have a camera yet

 

Still trying to decide whether to go with gopro or the other rd32ii that has been mentioned earlier. Among other things, I would want one where the mount can be adjusted to change the camera angle, especially if mounting on helmet.

 

well for me, despite the price im paying for the gopro, i know i wont go wrong with it. its proven to be extremely durable, easy to use and widest selection of mounts and third-party accessories. i always think if i buy those ebay type, if lens crack how? if button spoil, how? at least i got warranty as well as can easily other parts online.

 

flip up makes it so difficult to find a place to mount. i wasted 1 adhesive mount. alot of trial-and-error and really have to think out of the box to find a place to mount. but luckily for me, my gopro 3 got wifi so i can see preview on my phone's gopro app. makes it easier.