Gilera Star Club

[mimi_spyder]

theres this thing called dashboard spray to restore the blackness on it... im using this turtle wax brand... really good...

 

aniwae, i wuld just like to be advised if it is posible to sent for spraying for the black cover for the bike.as in because of petrol leaking when re-fueling(due to over pump petrol) causes the cover to fade..it is advisable to spray back to black or should i send it for sprying?..with laquer or without?...any shops to reco?

[manesh]

hi broz/sisz.... i am a VXR noobie...

Can someone tell me how to know if our clutch has worn n how much to rectify that?

also, how much is the malossi open pod plus installation?

 

Cheers

[skooch]

theres this thing called dashboard spray to restore the blackness on it... im using this turtle wax brand... really good...

 

i second that.. what my frens do is just the cheaper alternative... since we wash our bikes mostly in camp(stay in mah), most accessible and gives the same result is kiwi. just make sure after brushing it in, u use a rag to remove the excess..

[cheerioskunk]

kepada semua yg hadir semalam di bowling alley marina square, terima kasih kerna menyemarakkan lagi suasana.. kepada yg tak hadir, tkpe ada hari yg lain.. tapi jgn lah selalu M.I.A je.. moto hilang ru tau... kuang3...

 

So yesterdae game, Arif was the lowest score so air teh o ice blum membasahi tekakku yg kering nie... tapi takpe, kita kasi dia chance... lets take it that yest game was a warm up... lets have another game sooon.... but this time hope that lots of ppl can come join... so mana tau boleh blanja makanan skali...haha...

 

So guys, see ya soon.. im goin off to train to protect my country further...won't be around 4 3weeks... hope to c ya on the 30th Jan...

 

Signing off,

Captain Singapura

[th3.t3ach3r]

hi broz/sisz.... i am a VXR noobie...

Can someone tell me how to know if our clutch has worn n how much to rectify that?

also, how much is the malossi open pod plus installation?

 

Cheers

 

improper engaging of clutch will cause excessive vibration during move off.rectifying it can either be servicing and 'modifying' the clutch or changing a new set of clutch.this depends on the degree of damage of ur clutch.

and i advice u not to have the malossi open pod.bttr get the hurricane/k&n/simota open pod filter.the air flow for the malossi filter is not very good.ur bike will get boggy at times.hope this helps.

[bebear]

Hi guys, whats the suitable idling range for a stock ST200?

[bebear]

Hi Guys, whats the suitable idling range for ST200?

[skooch]

its should be 1.5.. too low, the bike will keep on dying on ya..

[skooch]

improper engaging of clutch will cause excessive vibration during move off.rectifying it can either be servicing and 'modifying' the clutch or changing a new set of clutch.this depends on the degree of damage of ur clutch.

and i advice u not to have the malossi open pod.bttr get the hurricane/k&n/simota open pod filter.the air flow for the malossi filter is not very good.ur bike will get boggy at times.hope this helps.

 

hmm.. looks like your knowledge abt gileras are quite up there la abang.. i got sum qns to ask u... to clarify sum stuff i'm still in the blue about...

 

modding your clutch, does it affect the durability of the clutch itself? i read in sum euro thread that just changing the clutch springs will do or maybe give better performance than changing to deltaclutch or any aftmarket clutch..

 

the spring 4 the multivar, what does it do?

 

i'm really looking forward to your reply.. thanks..

 

and btw, i saw quite a number of rbgc bikes at ktm some weeks back and i must say the bikes look raaaddd!

[manesh]

thx teacher,

apprciate ur knowledge.i'll probly give the open pod filter a mis.. so wats the price like for servicing of clutch n also price if changing new clutch?

 

Cheers...

[deedeeboi]

i'm facing this problem..nowbefore i start to move off..my handle feels very heavy..sometimes i know its because of the lack of air in the tyres but after i pumpd my tyres its still the same?..can i knoe whut could be the prblem?

[bebear]

hi guys..

where can i get those metal foot plates for gilera ST200?

Any shops??

Price??

[gin4]

theres this thing called dashboard spray to restore the blackness on it... im using this turtle wax brand... really good...

 

sounds good.. thanks for your info.

my dashboard has turned light grey liao

[ninja86]

hi guys..

where can i get those metal foot plates for gilera ST200?

Any shops??

Price??

 

u can check them out at the scooter shops @ kallang..price average is $70+

[mimi_spyder]

i got the same problem recently... my mac put greese at the steering cone den ok already...

i'm facing this problem..nowbefore i start to move off..my handle feels very heavy..sometimes i know its because of the lack of air in the tyres but after i pumpd my tyres its still the same?..can i knoe whut could be the prblem?

[neng]

hi guys..

where can i get those metal foot plates for gilera ST200?

Any shops??

Price??

 

tong aik 50 bux..

[bebear]

Hi guys...my speedometer does not work while the tempreture and fuel meter still works...

Could it possibly be the cables for the speedo that connects to the front wheel not working??

Will be going back to ASphoon to check later in the late afternoon...

Meantime any inputs from ST bro's out there??

[bebear]

tong aik 50 bux..

 

Thanks bro!!

Where is tong aik located?

[th3.t3ach3r]

from skooch: hmm.. looks like your knowledge abt gileras are quite up there la abang.. i got sum qns to ask u... to clarify sum stuff i'm still in the blue about...

 

not up there lah.just sharing what i know and learn from the mechanics and pro out there.

 

modding your clutch, does it affect the durability of the clutch itself? i read in sum euro thread that just changing the clutch springs will do or maybe give better performance than changing to deltaclutch or any aftmarket clutch..

 

ur clutch pads will wear out eventually due to wear and tear.not due to modding.its juz normal.'modding' here is basically juz cutting grooves onto ur clutch pads so as to increase friction and grip between the pads and ur clutch bell.so that ur clutch can engage ur bell better and ur transmission will be smoother.

the 3 colored springs are of different tensions.white=softest (similar to stock), yellow=medium tension and red=high tension.when u change these springs, u are actly causing ur clutch to be stiffer.thus, ur bike needs to be revved higher for it to move off.and causing an improve in ur acceleration.

aftermarket clutch is better as the spring tension can be further adjusted.however i've yet to see any shops tuning the delta clutch.maybe lack of experience in that area maybe? im not sure.but definitely aftermarket is better than stock.if not scooter race in europe would juz use stock clutch rite?

 

the spring 4 the multivar, what does it do?

 

spring for multivar? hmm ive never seen a spring at the multivar.are u refering to the torque spring? the big spring between the clutch and torque driver?

i'm really looking forward to your reply.. thanks..

 

and btw, i saw quite a number of rbgc bikes at ktm some weeks back and i must say the bikes look raaaddd!

 

hmmm im not too sure about that.. been long since i last lepak with them also.. but must say some of them have got really nice bikes.mine is just stock.

[whitewall]

Hi guys...my speedometer does not work while the tempreture and fuel meter still works...

Could it possibly be the cables for the speedo that connects to the front wheel not working??

Will be going back to ASphoon to check later in the late afternoon...

Meantime any inputs from ST bro's out there??

 

Same prob for me bro, i already changed the meter cable for $28.. But 1month later.. Snap Again.. Going change cable again..

[whitewall]

Thanks bro!!

Where is tong aik located?

 

Tong aik located at short st. Near sim lim square..

[whitewall]

Hi guys, can i just check anyone here riding 03-05 models vxr with sbk pipe? cos gmax says sbk only for 06 and above only?

[bebear]

xtra- thank bro!!

[th3.t3ach3r]

Hi guys, can i just check anyone here riding 03-05 models vxr with sbk pipe? cos gmax says sbk only for 06 and above only?

 

there's alot pf 05 that i know are on the road with sbk bro =)

[mimi_spyder]

which shop u got it change bro?

Same prob for me bro, i already changed the meter cable for $28.. But 1month later.. Snap Again.. Going change cable again..