[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[bam-bino]

  Ah Pek said:

May be let go mine...pm me how much you are willing to offer for a Kee_laK_kee_Lak one

 

 

ah pek... letting go ur header?? changing to the full system isit?? huhu.....

[Ah Pek]

  bam-bino said:

ah pek... letting go ur header?? changing to the full system isit?? huhu.....

 

Half hearted lah...offer must be really good. You want FS Yoshi?..I give you special ..installamnet oso can.

[MrIce]

wah can special installment ah haha

[bam-bino]

  Ah Pek said:

Half hearted lah...offer must be really good. You want FS Yoshi?..I give you special ..installamnet oso can.

 

 

wah so good huh,got special price for me??.... i have end can already lah bro.... huhu... but if u wanna let go juz the yoshi header oso can.... would love it... hehehehe...... till u can make up ur mind... coz the other day i went to seng kwang... the guy there said dat he could modify for me the pb1 header so that my yoshi can fit.... quote me abt $380,2 days job..... but if can get full system still better bro!!! wuhoo!!

[Ah Pek]

  bam-bino said:

wah so good huh,got special price for me??.... i have end can already lah bro.... huhu... but if u wanna let go juz the yoshi header oso can.... would love it... hehehehe...... till u can make up ur mind... coz the other day i went to seng kwang... the guy there said dat he could modify for me the pb1 header so that my yoshi can fit.... quote me abt $380,2 days job..... but if can get full system still better bro!!! wuhoo!!

 

Take the FS lah...then decide to sell your end can or the fs carbon graphite one and take back some $s lor.

[Ah Pek]

  MrIce said:

wah can special installment ah haha

 

Bo_pian lah...everyone no money...sighhh.

[Metal_Heart]

  bam-bino said:

wah so good huh,got special price for me??.... i have end can already lah bro.... huhu... but if u wanna let go juz the yoshi header oso can.... would love it... hehehehe...... till u can make up ur mind... coz the other day i went to seng kwang... the guy there said dat he could modify for me the pb1 header so that my yoshi can fit.... quote me abt $380,2 days job..... but if can get full system still better bro!!! wuhoo!!

 

Let me know if u just getting the yoshi header. Maybe I can get just the end can Depending

[Metal_Heart]

  Ah Pek said:

Half hearted lah...offer must be really good. You want FS Yoshi?..I give you special ..installamnet oso can.

 

Ahpek if ppl wanna get just the header maybe I can use ur installment plan get the endcan? . Btw how much if just the endcan?

[Ah Pek]

  Metal_Heart said:

Ahpek if ppl wanna get just the header maybe I can use ur installment plan get the endcan? . Btw how much if just the endcan?

 

Wah...good idea leh. I won't really know how leh. May be you can discuss with Bam-bino as how to split it as long as I get the same return.

[Ah Pek]

  Metal_Heart said:

Let me know if u just getting the yoshi header. Maybe I can get just the end can Depending

 

Wah...great ides mannn!

[Ah Pek]

  bam-bino said:

wah so good huh,got special price for me??.... i have end can already lah bro.... huhu... but if u wanna let go juz the yoshi header oso can.... would love it... hehehehe...... till u can make up ur mind... coz the other day i went to seng kwang... the guy there said dat he could modify for me the pb1 header so that my yoshi can fit.... quote me abt $380,2 days job..... but if can get full system still better bro!!! wuhoo!!

 

Hmmm...try not to do it the Seng Kwang way lah...the cost of $380 and you have to add a PB1 system secondhand say, $120-$150...comes to $600+...wait two days somemore and not sure if it really performance. Get the original actual Yoshi header and know it matches...less worries..takes only half hour or so to put it on.

[rockoil]

Guys,

 

If i encounter my steering vibrate slightly left and right when i ride will single hand is likely what item loose or spoilt?

 

Cos i remember didnt encounter this problem previously.

 

Any advises?

[bam-bino]

  Ah Pek said:

Hmmm...try not to do it the Seng Kwang way lah...the cost of $380 and you have to add a PB1 system secondhand say, $120-$150...comes to $600+...wait two days somemore and not sure if it really performance. Get the original actual Yoshi header and know it matches...less worries..takes only half hour or so to put it on.

 

 

hehehe.... ok can... but tiil u decide lah bro... btw hw much r u looking at? got interest rate onot if installment?? lolz.....:cheeky:

[bam-bino]

  rockoil said:

Guys,

 

If i encounter my steering vibrate slightly left and right when i ride will single hand is likely what item loose or spoilt?

 

Cos i remember didnt encounter this problem previously.

 

Any advises?

 

 

tink maybe cone bearing loose or maybe gone lah... ever encountered this wif my tzm b4... juz a guess...

[Ah Pek]

  rockoil said:

Guys,

 

If i encounter my steering vibrate slightly left and right when i ride will single hand is likely what item loose or spoilt?

 

Cos i remember didnt encounter this problem previously.

 

Any advises?

 

Check your tyres for corret pressure and for uneven weara nd tear. Possible fron't wheel axle bearings also.

[Ah Pek]

  bam-bino said:

hehehe.... ok can... but tiil u decide lah bro... btw hw much r u looking at? got interest rate onot if installment?? lolz.....:cheeky:

 

Installment in three parts lah (will pay up for u first)..interest is one packet K0-Pee-Orh each time you come do payment.

[bam-bino]

  Metal_Heart said:

Let me know if u just getting the yoshi header. Maybe I can get just the end can Depending

 

hey metal heart.... yup2 tot of getting the header only,so u can have the encan... but oso depenps on ah pek hw much he letting go lah....

[bam-bino]

  Ah Pek said:

Installment in three parts lah (will pay up for u first)..interest is one packet K0-Pee-Orh each time you come do payment.

 

 

hehe... ok bro... if u can pm me hw much will be great....

Edited March 19, 2010 by bam-bino

[ahdon]

j_tan49: My coolant was also leaking. but maybe not as badly as yours. After doing the patch with ahpek, no problem liao. hope it stays this way.

 

rockoil: My steering handle also shakes/vibrates left and right. Only found out recently.

 

Was riding at around 70 then let loosen my grip on the handle bar to see if it will go straight or lean towards one side. For a start, the bike leans slightly towards the right. then the steering bar starts to vibrate/shake left and right. I quickly resume my grip.

 

Tot was a once off thing so i tried again this morning. below 60km/h nothing happens, but once above 60km/h, the handle bar vibrates.

 

Ah Pek: How much to fix the steering cone at ah fook?

[Ah Pek]

  ahdon said:

j_tan49: My coolant was also leaking. but maybe not as badly as yours. After doing the patch with ahpek, no problem liao. hope it stays this way.

 

rockoil: My steering handle also shakes/vibrates left and right. Only found out recently.

 

Was riding at around 70 then let loosen my grip on the handle bar to see if it will go straight or lean towards one side. For a start, the bike leans slightly towards the right. then the steering bar starts to vibrate/shake left and right. I quickly resume my grip.

 

Tot was a once off thing so i tried again this morning. below 60km/h nothing happens, but once above 60km/h, the handle bar vibrates.

 

Ah Pek: How much to fix the steering cone at ah fook?

 

There is nothing wrong with ur bike and its not a way to tell that the steering cone is damage or a problem by realsing free hand while you ride. Even you change new tyre, after a few months, you freehand, the wheel would oso wobbles at time. Check your tyre pressure by pumping higher psi and see how..it happens when tyre pressure are too low. Anyway..Ah Fook change steering cone for $120 I think.

[Metal_Heart]

Ahdon,

 

this could be your tyre pressure. I remember last time i had the problem too. Vibration, if I release my handlebar the bike will go towards the right.

One way to find out is when the bike is stationary, with a low tyre pressure it will be harder to turn the handlebar left or right.

 

I just try pump tyre cause that time I didnt know what the hell a cone bearing all that was.. lol

[indiewhispers]

anyone knows where i can get mudflap? like those no kiss brand type.. and how much ya?

[rockoil]

  Ah Pek said:

Check your tyres for corret pressure and for uneven weara nd tear. Possible fron't wheel axle bearings also.

 

Hi Pek,

 

Er.. Tire pressure is correct.

Steering cone bearing change recently. (unless being cheated)

 

So i guess i left with either tire uneven wear or wheel axle bearing le.

 

Any idea or methods to check axle bearing? Is it expensive to change it? If not i will change it away to see if it helps.

 

Normally when we change the fork seal, will the fork oil be replaced? Or we actually need to change it seperately?

 

What does a fork brace help in the handling of the bike?

 

i see many fellow VerS rider goes visit you for some special packages. Could you let me know what are they? Cos i am interested to relive my VerS too.

 

Sorry for so many questions as i dont know who to look for for advises.

Regards.

Edited March 19, 2010 by rockoil

[rockoil]

  ahdon said:

rockoil: My steering handle also shakes/vibrates left and right. Only found out recently.

 

Lets keep each other update when we solve this problem.

Haiz.....

[ahdon]

Thanks for the feedback. Been trawling through the forum and i still cannot determine what pressure to pump the tyres to. I'm around 60kg and seldom pillion.

 

Any recommendation on the tyre pressure?