The GSXR 600,750 & 1000 Hangout. Where All GSXR Riders Chill And Gather!!

[MC28]

Update for those using the b/m engine oil...

 

Fuchs Silkolene Pro 4 Plus 10W50 is now $16 per bottle..

 

(Direct from Agent..DIY)

[Ni3KiDz]

Originally posted by kimderson@Jan 2 2006, 09:08 AM

mine also same mileage drop to 200km b4 reserve.

But there's no backfire.

Change to aka then teka on the spot.

From wat i c might the the horse power gain after the change of after market exhaust.

More horse power = more fuel consumption

Hi... just wan to check wif u do u hv flat spot @ 2-3 rpm??

[2wheels]

Originally posted by paiseh@Jan 1 2006, 06:10 PM

after grounding damn swee hehe

 

abt the rvf thread the 180km/hr.. hai.. bo liao.. i hope nothing happens. ride so fast for wat hor? i ride is to blind ppl only hahahahahahah

how much u do ure grouding? how many pts?

neways theres 1 guy in sbf who did grouding for his 04r1 n it fried his ecu due to improper installation

[paiseh]

Originally posted by 2wheels@Jan 2 2006, 05:16 PM

how much u do ure grouding? how many pts?

neways theres 1 guy in sbf who did grouding for his 04r1 n it fried his ecu due to improper installation

grounding i did at HKL, cost $55. wat i can say is the grounding done is darn professional. i did a 4 point grounding, max for my bike. now riding is superb, no lag between 1krpm to 3krpm even when doing high gear low speed.

 

mileage has miraculously improved by 22km which means an improvement of 1.2km per litre.!!!

[paiseh]

Originally posted by 2wheels@Jan 2 2006, 05:16 PM

neways theres 1 guy in sbf who did grouding for his 04r1 n it fried his ecu due to improper installation

EFi bike i suggest go shop do better.. those uncommon bikes like mine i rather go shop do grounding.

 

i dun trust some ppl in here doing electrical DIY stuff for ur bike. coz i have seen n heard a few cases liao.

 

 

better be safe den sorry

[paiseh]

bikes like super 4, phatom safe enough to try, but our bike dun play around. hehe

[2wheels]

Originally posted by paiseh@Jan 2 2006, 05:24 PM

EFi bike i suggest go shop do better.. those uncommon bikes like mine i rather go shop do grounding.

 

i dun trust some ppl in here doing electrical DIY stuff for ur bike. coz i have seen n heard a few cases liao.

 

 

better be safe den sorry

bt the shop u mentioned also can trust meh?

maybe i go planet or bikeworks n ask

[paiseh]

Originally posted by 2wheels@Jan 2 2006, 05:31 PM

bt the shop u mentioned also can trust meh?

maybe i go planet or bikeworks n ask

haha, yup, to me at least. my bike was from there. attitude and pricing is good. i feel la..

 

but i can tell u, there can do grounding! safe!

[2wheels]

Originally posted by paiseh@Jan 2 2006, 05:33 PM

haha, yup, to me at least. my bike was from there. attitude and pricing is good. i feel la..

 

but i can tell u, there can do grounding! safe!

if i decide to do grounding there, i jio u can? got uneasy feeling to do stuff there though their stuffs damn cheap

[paiseh]

Originally posted by 2wheels@Jan 2 2006, 05:55 PM

if i decide to do grounding there, i jio u can? got uneasy feeling to do stuff there though their stuffs damn cheap

can can, near my house ma.. haha shawn also wanna do there also.. maybe can go together with both of u

[2wheels]

Originally posted by paiseh@Jan 2 2006, 05:56 PM

can can, near my house ma.. haha shawn also wanna do there also.. maybe can go together with both of u

no problemo, will inform u after i scout for prices

btw u not changing to aftermarket pipes?

[paiseh]

Originally posted by 2wheels@Jan 2 2006, 06:01 PM

no problemo, will inform u after i scout for prices

btw u not changing to aftermarket pipes?

i saving up money for HID to blind ppl first ahhahhhahaha

 

and a nice full face..

[2wheels]

Originally posted by paiseh@Jan 2 2006, 06:03 PM

i saving up money for HID to blind ppl first ahhahhhahaha

 

and a nice full face..

buy fullface first lah, HID to me is nt worth the mod. dun mind me.....anything to do with electrical system, im a bit paranoid haha

 

neway to blind pple effectively (with hid or not) is too tailgate closely.

but on a bike

[WW]

Originally posted by Ni+3KiDz@Jan 2 2006, 03:57 AM

wait now im really confuse u said wif Suzuki Pair valve linking the airbox to exhaust ports our bike shld nt backfire but If you changed to an aftermarket exhaust, may also have backfire.

So our bike shld not or may have backfire which is which??

By the way im usin a aftermarket end-can b4 i teka everything is fine but after TEKA is done thing like gettin out of place wif sugglish low RPM , pick up seen like slower then b4 and worst of all the backfire

it alway like these, If you change to a race exhaust , the pick up wont be so good,cos you dont stay in that low RPM.Put back your sliencer, it would be better.Or re teka with the sliencer,cos you ride in SG road more.

 

You need to go test the mid and top, than feed back to the mech that do the teka.

Kinwei went teka 3 time before he is totaly happy with his setting.

But you got a problem, you restrict from going to malaysia.

 

Anyway teka cant slove the backfire problem.Cos teka cant tune 0% fuel .

Backfire happen when you close throttle,which is at 0%.

Before my bike install PC, it backfire when i close throttle. or even when i drop a gear.it only slove it after i install my PC3 for my bike.

[Father John]

Originally posted by jla@Jan 2 2006, 08:41 PM

No he's sick... so didn't go.... poor thing...

 

Hey my friend ask which damper is good for CBR 954.... I know this place for R1.. sorry but i dun know so i ask u guys. Alj say ohlins, but my friend say too expensive got cheaper? or can find second hand? he just got his bike.

If he's on a budget, get a 2nd hand lor. As long it's still working, should be ok. Btw, my mechanic told me not to use my damper in Singapore (means don't using the damping) to prolong the usage of it. I agree. I only use the damping when I go to Malaysia. Just my 2 cents worth.

[Andr3w]

guys who know the actual RPM for our bike to change gear,which able us to get to the max out put of power or top speed...?

[Shawn--]

hello people !!! back from genting and KL. KL just simply SUXS to da CORE. Take taxi kana chop, got meter dont wan to use.

Go genting 1st time try casino and i lost my way in there, lost my mind and lastly lost my money.

 

Heard from my fren around ubi there got 1 car shop selling HID for $180, tml will be down check it out.

 

And i think my volt meter is taking too much volt liao. Now i warm up bike is 14v, when on headlight liao it drop to 12volt. WTF? Yaya grounding when?

[vidz23]

Originally posted by Father John@Jan 2 2006, 08:51 PM

If he's on a budget, get a 2nd hand lor. As long it's still working, should be ok. Btw, my mechanic told me not to use my damper in Singapore (means don't using the damping) to prolong the usage of it. I agree. I only use the damping when I go to Malaysia. Just my 2 cents worth.

u mean take out ur damper in singapore ah?

u have all the tools to do that ah? not troublesome meh?

[Shawn--]

Originally posted by johntan@Dec 30 2005, 11:26 PM

Firstly an apology to all....

I have decided to stop doing Teka tuning; OK, I mean I love bikes and helping people and all... but it's just really taking too much time and it's not my primary work... and I am just quite tired.

 

Shawn, since I had already worked on your bike; I'll do it again for you when you have changed your endcans.

 

2wheels.. same goes for you.

 

But I am sorry to say that I would not be taking on any more new tuning jobs for the time being.

 

Apologies.

John: Man, it was a great lost to me. Btw thanks man for the offer. Will look for u mid of the month.

 

Rest: ehh anyone wan to join me tml HKL for grounding? Feel like pulling out da voltmeter and throw away sial.. makan my voltage!

[299]

Originally posted by jla@Jan 2 2006, 08:41 PM

No he's sick... so didn't go.... poor thing...

 

Hey my friend ask which damper is good for CBR 954.... I know this place for R1.. sorry but i dun know so i ask u guys. Alj say ohlins, but my friend say too expensive got cheaper? or can find second hand? he just got his bike.

can try bitubo or pensek brand, heard tat there re good.

[Father John]

Originally posted by vidz23@Jan 2 2006, 09:39 PM

u mean take out ur damper in singapore ah?

u have all the tools to do that ah? not troublesome meh?

I did'nt mean that. I meant I don't set the setting to 0, and only set it up a few clicks when I go to Malaysia.

[299]

Juz my advise, getting a damper or not is really up to own dividual needs.

 

For my case, last time mine don't hv. Handling wise is ok for me but the damper

 

provide me less vibrations frm the handle when on NSW Expressway on

 

180km/hr.....my both hands less vibrations frm that kind of speeds.

[maxbg]

Hey guys,

 

I think some of you has seen this video on how reliable the R1 is when Sjaak Lucassen used it to travel around the world. It's already 5 years and the bike is still going strong after 195,000+kms.

 

http://www.sjaaklucassen.nl/sjaaklucassen/images/content/1029146204_yzfR1.gif

 

http://www.sjaaklucassen.nl/

 

Here are the links to some of his videos for those who has not seen it.

 

Click Here for the Speed channel interview with him

 

Click Here and search for his original video (Sjaak and the world)

[jla]

Thank you guys! i'll ask him to see this page. and if he needs more questions to be answered, i ask him to post here is that ok with u all?

[ET]

hi guys, i may be selling my k1 750 oon, maybe by early feb...got any friends want to buy???selling at ard 10.5k(neg)with everything on...if you have get them to contact me ba at 92389670.thanks!