High Performance Sprockets & Chain Kit ( DRIVEN/ AFAM/ISA/Vortex/Supersprox/XAM/CHT)

[Unique_Motorsports]

http://i562.photobucket.com/albums/ss69/uniquemotor2/Supersprox.jpg

[Unique_Motorsports]

ESJOT Sprockets: Diamond Cut - Revolutionizes The Sprocket Technology

 

http://i600.photobucket.com/albums/tt84/uniquemotor4/esjotsmall.gif

 

ESJOT is the exclusive OEM of Aprilia, KTM, BMW and others for sprockets!

 

ESJOT, ESJOT- Antriebstechnik GmbH is one of Germany's leading sprocket manufacturers. For over 80 years ESJOT has been designing and manufacturing high end sprockets using the finest materials. All aluminum sprockets are made from 7075 T6 and are hard anodized. This will increase the lifetime of the sprocket significantly. The steel for counter shaft sprockets and rear sprockets meets or exceeds highest OEM requirements. The high tensile strength of this material guarantees extreme long life.

DIAMOND CUT revolutionizes the sprocket technology. In cooperation with the University of Paderborn Germany, ESJOT has developed a new process to cut the teeth of chain driven sprockets. "Diamond cut" is an innovative manufacturing process resulting in a visible higher quality sprocket than has been possible on standard milled sprockets. Special tooling guarantees a super accurate cutting surfaces. At the same time the material is highly condensed in the area of the teeth flanges, so that in many cases additional heat treatment is no longer necessary. All sprockets are made from the best German steel or aluminum to obtain a continued high quality product.

 

Counter Shaft Sprockets Highest quality steel Mn CR5 of OEM quality is precision cut on CNC machines. Cutting the teeth with our "Diamond Cut" process and case hardening of 700 HV40 (case depth of 0.4mm) meets the highest quality. Modern milling machines guarantee a perfect fit on the drive shaft with tolerances of overall diameter and wobble remaining under 0.1mm.

 

Sprockets (rear) Center holes are precisely cut on CNC machines with extremely low tolerances. Only special steel qualities "Qste 420" and "Qste 460" are used. Mounting holes are countersunk and cleaned. Teeth are cut with the new special procedure "Diamond Cut", with tolerances of overall diameter and wobble of below 0.2mm which guarantees super smooth running.

 

http://i600.photobucket.com/albums/tt84/uniquemotor4/Esjotsmallsprocket.gif

 

Front Sprockets

Highest quality steel 16 MnCR5 of OEM quality is precision cut on CNC machines. Cutting the teeth with our "DIAMOND CUT" process and case hardening of 700 HV40 (case depth of 0.4 mm) meets the highest quality requirements.

 

Modern milling machines guarantee a perfect fit on the drive shaft with tolerances of overall diameter and wobble remaining under 0.1 mm.

 

Rear Sprockets

Center holes are precisely cut on CNC machines with extremely low tolerances. Only special steel qualities "Qste 420" and "Qste 460" are used. Mounting holes are countersunk and cleaned. Teeth are cut with our new special procedure "DIAMOND CUT" with tolerances of overall diameter and wobble of below 0.2 mm guarantee super smooth running.

 

Front ESJOT sprockets for Japanese bikes: $50 (Cash & Carry), $65 with installation.

[ficklepickle]

Can I just check if you have 42T Rear 14T Front sprockets for NSR150SP converted to 428? Thanks

[Unique_Motorsports]

Can I just check if you have 42T Rear 14T Front sprockets for NSR150SP converted to 428? Thanks

 

You have a PM.

[Unique_Motorsports]

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs754.ash1/164496_496974597105_160394947105_6300045_3118069_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1393.snc4/164500_496974707105_160394947105_6300053_2676248_n.jpg

[newbienoob]

Nsr250 15 front 44/42 rear. how much?

[pipo]

Stock for R6 afam sprocket available?

[Unique_Motorsports]

Nsr250 15 front 44/42 rear. how much?

 

You have a PM.

 

Stock for R6 afam sprocket available?

 

Yes, in stock.

[Unique_Motorsports]

High Performance Sprockets & Chain Kit (DRIVEN / AFAM/ ISA/ Vortex/ Supersprox/ CHT / ESJOT/XAM)

 

http://i600.photobucket.com/albums/tt84/uniquemotor4/sprocketbrands.jpg

 

Sprockets: AFAM / ISA / Vortex / Supersprox / DRIVEN / CHT /XAM

Chain: DID / RK / EK X-Ring Gold Chain

(DID = VM , RK = XSO , EK = SRX)

 

$280 PACKAGE (520)

- Front Sprocket (520)

- Rear Sprocket (520)

- DID or RK or EK X-Ring Gold chain (520)

- Installation of the sprockets & chain

 

$300 PACKAGE (525)

- Front Sprocket (525)

- Rear Sprocket (525)

- DID or RK or EK X-Ring Gold chain (525)

- Installation of the sprockets & chain

 

$320 PACKAGE (530)

- Front Sprocket (530)

- Rear Sprocket (530)

- DID or RK or EK X-Ring Gold chain (530)

- Installation of the sprockets & chain

 

*Mix & Match of sprockets/chain are allowed.

*Subject to availability *Applicable & available to most Japanese models.

 

*Upgrade to EK MVXZ X Ring (Coloured) or DID ERV3 (Racing) Chain @ $60 (520 pitch only)

*Upgrade to EK MVXZ X Ring (Coloured) 525 pitch @ $70 / 530 pitch @ $75

[fidz07]

Hi Unique...

 

Can I know the difference between the numbers... (i.e: 520, 525, 530)...?

 

Thanks....

[Unique_Motorsports]

Hi Unique...

 

Can I know the difference between the numbers... (i.e: 520, 525, 530)...?

 

Thanks....

 

It's refering to the chain pitch.

[kuDer]

bro,

 

how much for ur afam front/rear sprox + x-ring chain for r1 09?

[Unique_Motorsports]

bro,

 

how much for ur afam front/rear sprox + x-ring chain for r1 09?

 

You have a PM.

[napalm_rapier]

Hi,

 

Do you have 520 kit ISA or AFAM for varadero 125? Colours? Price?

 

Pls PM me..

 

Thanx!

[Unique_Motorsports]

Hi,

 

Do you have 520 kit ISA or AFAM for varadero 125? Colours? Price?

 

Pls PM me..

 

Thanx!

 

You have a PM.

[SC Gaban]

do u hav spockets for hyusong gt 250 naked?

[Unique_Motorsports]

do u hav spockets for hyusong gt 250 naked?

 

You have a PM.

[cumified]

difference between 520, 525 and 530? do u have vortex for Gsxr400?

[Unique_Motorsports]

difference between 520, 525 and 530? do u have vortex for Gsxr400?

 

You have a PM.

[Unique_Motorsports]

High Performance Sprockets & Chain Kit (DRIVEN / AFAM/ ISA/ Vortex/ Supersprox/ CHT / ESJOT/XAM)

 

http://i600.photobucket.com/albums/tt84/uniquemotor4/sprocketbrands.jpg

 

Sprockets: AFAM / ISA / Vortex / Supersprox / DRIVEN / CHT /XAM

Chain: DID / RK / EK X-Ring Gold Chain

(DID = VM , RK = XSO , EK = SRX)

 

$280 PACKAGE (520)

- Front Sprocket (520)

- Rear Sprocket (520)

- DID or RK or EK X-Ring Gold chain (520)

- Installation of the sprockets & chain

 

$300 PACKAGE (525)

- Front Sprocket (525)

- Rear Sprocket (525)

- DID or RK or EK X-Ring Gold chain (525)

- Installation of the sprockets & chain

 

$320 PACKAGE (530)

- Front Sprocket (530)

- Rear Sprocket (530)

- DID or RK or EK X-Ring Gold chain (530)

- Installation of the sprockets & chain

 

*Mix & Match of sprockets/chain are allowed.

*Subject to availability *Applicable & available to most Japanese models.

 

*Upgrade to EK MVXZ X Ring (Coloured) or DID ERV3 (Racing) Chain @ $60 (520 pitch only)

*Upgrade to EK MVXZ X Ring (Coloured) 525 pitch @ $70 / 530 pitch @ $75

 

--------------------------------------------------------------------------------------------------------------------------

 

AFAM SPROCKETS + DID X-RING CHAIN KIT

 

http://www.partsforbike.com/products/380/large.jpg

http://www.partsforbike.com/products/624/large.jpg

 

BENEFITS:

- AFAM sprocket is made of high grade 7075T6 aluminium or high carbon steel

- DID X-Ring chain are 1.5 to 2 times longer wear resistance than any type of O-Ring chain

- DID X-Ring chain reduces friction and reduces power loss as compared with normal O-Ring chain

- Conversion kit benefits: Light Weight

- Conversion kit benefits: Better Acceleration

 

$280 AFAM SPROCKETS & CHAIN KIT (520 CONVERSION KIT):

- Front AFAM sprocket

- Rear AFAM sprocket

- DID X-Ring Chain (520)

Applicable for:

1) Honda CB400 Super 4/Vtec (520 convert)

2) RVF 400 (520 convert)

3) DRZ400

4) R1 (520 convert)

5) R6 (520 convert)

6) GSXR 600/1000 (520 convert)

7) CBR600 (520 convert)

8) CBR1000 (520 convert)

9) FZ1 (520 convert)

10) ZX10R (520 convert)

11) ZX6R (520 convert)

12) CBR1100XX (520 convert)

 

$300 AFAM SPROCKETS & CHAIN KIT (525 KIT):

- Front AFAM sprocket

- Rear AFAM sprocket

- DID X-Ring Chain (525)

Applicable for:

1) Honda CB400 Super 4/ Vtec

2) RVF 400

3) GSXR 600

4) GSXR 1000

5) CBR 600RR

6) CBR 1000RR

7) FZ1

8) FZ6

9) R1

10) R6

11) ZX10R

12) Street Tripple 675

 

$320 AFAM SPROCKETS & CHAIN KIT (530 KIT):

- Front AFAM sprocket

- Rear AFAM sprocket

- DID X-Ring Chain (530)

Applicable for:

1) CBR1100XX

2) GSXR 1000

3) CBR 1000

4) ZX 12R

5) FZ1

6) R1

7) Hayabusa

8) B King

9) Speed Triple 1050

 

Note: Rear alloy sprocket can be hard anodised or gold in colour or AFAM higest quality induction hardened C45 steel (subject to availability)

[muhdhanief]

Bro quote me DID x ring n afam sprockets for gsr4? Thanks alot

[Unique_Motorsports]

Bro quote me DID x ring n afam sprockets for gsr4? Thanks alot

 

$280 with installation.

[ZOOKZOOK]

Hi Kelvin,

 

Do you have Front 15T Rear 47T(Black) 520 conversion for 2009 R6?

[Unique_Motorsports]

Hi Kelvin,

 

Do you have Front 15T Rear 47T(Black) 520 conversion for 2009 R6?

 

You have a PM.

[WSTAN]

any on varadero 125?what combination can fix?