[Group] Yamaha FZ16

[jibby]

Hi

anyone know where i can get the "metal brace"? Those that they fix under the tank making it look like a ducati. And also where can i get a box like those they use for touring? I know there are trax brand but its kinda ex for me.. anyone can recommend me a reasonable price and place?

 

Thanks ya..

[calvenng]

Hi guys,

 

Where to do the back seat like R15 for FZ16?

I ever saw it and looks nice.

[Wanomoto]

this looks good.. but i wonder if it is LTA and inspection approved

[Afif]

Anyone here have a yoshimura pipe to sell off for fz16n do pm me thanks!

[idjekyll]

Getting my fz16 st tomorrow!.

[Fiq_91]

Hi bros, fz16 newbie here. Just would like to ask, have anyone ever experience your clutch cable tension getting softer hence making your biting point nearer and nearer to the handle? According to some i asked they said it may be due to the clutch cable wear and tear. As such i changed the clutch cable and adjusted my biting point to make it further. After about two weeks i noticed the same thing happened. The biting point gets nearer and nearer. Any advice on what i should do? I mean i know that from time to time you have to adjust your biting point but one two weeks isnt it too fast?

[vemonstorm]

Hi all. Just get my FZ16 today. FBG plate. What accessories does it have? And what modification can it be done?? Looking forward for u guys reply. Or maybe u got anything to sell can whatsapp me at 97990977. Thanks.

[TsuchimiRin]

Hi bros, fz16 newbie here. Just would like to ask, have anyone ever experience your clutch cable tension getting softer hence making your biting point nearer and nearer to the handle? According to some i asked they said it may be due to the clutch cable wear and tear. As such i changed the clutch cable and adjusted my biting point to make it further. After about two weeks i noticed the same thing happened. The biting point gets nearer and nearer. Any advice on what i should do? I mean i know that from time to time you have to adjust your biting point but one two weeks isnt it too fast?

 

Go back to the shop that did changes to your clutch cable, I suspect it might be something else other than just the cable itself. I have yet to experience whatever you are experiencing.

 

Hi all. Just get my FZ16 today. FBG plate. What accessories does it have? And what modification can it be done?? Looking forward for u guys reply. Or maybe u got anything to sell can whatsapp me at 97990977. Thanks.

 

Belly pan and fork guard for cosmetic, changing your handlebar to renthal handlebar if you like wider handlebar, wind guard for speedometer.

[vemonstorm]

Wher do I get those accessories bro?

[TsuchimiRin]

Wher do I get those accessories bro?

 

Unique motorsports sells those accessories. Bike decal you will have to find the shop somewhere in lavender, I am still looking for a decal shop btw.

[vemonstorm]

Just got the belly pan from wing yap. Abit expensive.

[Fiq_91]

Go back to the shop that did changes to your clutch cable, I suspect it might be something else other than just the cable itself. I have yet to experience whatever you are experiencing..

 

Alrigt thanks bro

[TsuchimiRin]

I was wondering if any new fz16 riders here who got a tank bra and crash bar for their bike, if anyone of you did, I would love to know the latest price of the mentioned 2 items.

[tom_jerry]

Anyone looking for fz16 belly pan? Selling off mine. Please contact me at 92209429. Thanks

[jamestraceur]

Hi guys,

Looking for an Fz16,

You can contact me at nine one 8 3 5 3 9 1

or jamestty@gmail

[deletto86]

Hi...anybody here looking for trade their fz16 with super4 spec3..?

I got fren looking to downgrade to fz16... if any of you wanna upgrade to super4 can msg me at 90694967.

[xerojoker]

Has anyone changed their tyres to a bigger size from the original tyres? Just wanna know what brands and sizes are out there for fz16 and if there are any cons about using bigger tyres..

[pace]

hey bros , i like to share i use 95 unleaded petrol for my fz , so far after 1 yr plus ok leh. no need to use until top grade 98..

[TsuchimiRin]

Has anyone changed their tyres to a bigger size from the original tyres? Just wanna know what brands and sizes are out there for fz16 and if there are any cons about using bigger tyres..

 

If I am not wrong, there is this brand called Shinko that gives bigger rear size (i used to have this before I changed over to pirelli demon sports tires), alot of ppl have always told me that the bigger the tires, the more drag there will be, the pros will most probably be better handling. The one I used to use had lesser line threading and I was told it will cause easier skidding.

 

hey bros , i like to share i use 95 unleaded petrol for my fz , so far after 1 yr plus ok leh. no need to use until top grade 98..

 

I tried using 98 before and it only made FC lower to 30ish/L, 95 gave me better FC as compared.

[alexooi]

Hi guys there is Tank Bra available for FZ16 now here are the pictures of how it looks like , If you guys are interested can go down to Motorworld Kaki Bukit or Lavender to inquire. As you guys know the tanks are plastic u cant use those magnetic bags to stick on the tank now with the tank bra u can get bags to hook on it.

[gestapozi]

Hi bros.. Any recommended shops to buy new or used FZ 16? Gonna go recce for it.. recommendations will make my life easier

[xerojoker]

Thanks! I heard motoworld coming out with new Pirelli tyres.. Gonna try them out when it arrives!

[shun07]

Guys I got a noob question to ask. I recently bought a fz16 and I'm having problem to get the bike off from main stand. I tried to mount onto and push it down however to no avail. Therefore the only way for me is ,to push down the bike by pushing the handle from standing position. I just wonder if there's anyone able to push down the bike when is on mount position? As I'm worried that the bike might fall if I kept on doing the "handle bar push " method. Really noob question.

[TsuchimiRin]

Guys I got a noob question to ask. I recently bought a fz16 and I'm having problem to get the bike off from main stand. I tried to mount onto and push it down however to no avail. Therefore the only way for me is ,to push down the bike by pushing the handle from standing position. I just wonder if there's anyone able to push down the bike when is on mount position? As I'm worried that the bike might fall if I kept on doing the "handle bar push " method. Really noob question.

 

I do not have that problem, all I can say is I suspect that you are still not used to the bike's weight, position etc, I can get the bike off the main stand be it from handle bar push or mounting position, try to get used to it. If you suspect that main stand might be a bit tight, try putting your bike to side stand and try fiddling the main stand with your hands, if it is too tight, you might wanna consider lubricating your main stand's moving parts. I had the same problem in handling my bike when I just got it but after getting used to it's weight, I had no more problem.

[anodise57]

For all those using HS1 bulbs...

 

Promo Osram Silverstar + 50% only at $22/pc while stocks last.

http://i20.photobucket.com/albums/b250/anodise5757/project57/HS1Scoot_zpsdedea047.jpg