Technical Information and other info

[HondaSuperFourHSF]

Originally posted by Kinz@Jul 31 2006, 07:43 PM

how about knn air filter?? how long must wash once ah?

KNN filter wash every 40000 km

washing can be done at motorshop at less than $15.

[flamewong]

Hi all, would like to ask where can my s4 seat change? saw a few on the road with honda wording on it.

 

pls advise thanks.

[ah_huats]

219 lavender street.

[flamewong]

what would be the price like? or depends on the design and quality?

 

for average how much it cost?

[flamewong]

what would be the price like? or depends on the design and quality?

 

for average how much it cost?

[bobktm2]

I just bought a super4. The manual says that we had to check for engine oil level once a while after warming up the bike. There is 2 levels, high and low level. The engine oil must be in between this level.

 

When i did a check, i couldnt see the level of the engine oil. So i didnt know if the engine oil is above the high level or below the low level. Could someone pls help on how to check the level properly?

[HondaSuperFourHSF]

Engine oil is to check when is cool and not warm up. If you want to warm up first then you have to wait till it slowly come down to the pan.

[bobktm2]

Ok i ll do that.

[HondaSuperFourHSF]

Hi all,

 

if you got questions on superfour do give a post i will try to solve it for you. As for those questions ask before please refer to page 1

[William Tan]

Originally posted by bobktm2@Aug 4 2006, 11:04 PM

I just bought a super4. The manual says that we had to check for engine oil level once a while after warming up the bike. There is 2 levels, high and low level. The engine oil must be in between this level.

 

When i did a check, i couldnt see the level of the engine oil. So i didnt know if the engine oil is above the high level or below the low level. Could someone pls help on how to check the level properly?

The "according-to-the-book" method is said to be more accurate.

 

It is however a little time consuming.

 

After warming up the bike for ~3mins, you have to let it stand awhile (with the engine off) for another ~3mins to allow the oil to flow back to the pan, before putting your bike straight, and taking the oil reading.

 

If you have a mainstand, that's a plus.

[William Tan]

Originally posted by bobktm2@Aug 4 2006, 11:04 PM

I just bought a super4. The manual says that we had to check for engine oil level once a while after warming up the bike. There is 2 levels, high and low level. The engine oil must be in between this level.

 

When i did a check, i couldnt see the level of the engine oil. So i didnt know if the engine oil is above the high level or below the low level. Could someone pls help on how to check the level properly?

The "according-to-the-book" method is said to be more accurate.

 

It is however a little time consuming.

 

After warming up the bike for ~3mins, you have to let it stand awhile (with the engine off) for another ~3mins to allow the oil to flow back to the pan, before putting your bike straight, and taking the oil reading.

 

If you have a mainstand, that's a plus.

[d3an_cain]

any1 knows how 2 adjustt he digital clock on ur VTEC?

 

my bike drop n the clock time display way off..

[d3an_cain]

any1 know how to adjustthe digital clock on ur vtec?

[d3an_cain]

any1 know how to adjustthe digital clock on ur vtec?

[d3an_cain]

any1 know how to adjustthe digital clock on ur vtec?

[bgoy]

wat is e tire pressure to pump for front and rear?? thanks

search reviewed too many results but tedious to look thru every page to see where is tire pressure

[HondaSuperFourHSF]

Originally posted by d3an_cain@Aug 8 2006, 01:02 PM

any1 know how to adjustthe digital clock on ur vtec?

ok by pressing on both buttom you will be able to change the timing. Right button then left button.

[HondaSuperFourHSF]

Originally posted by bgoy@Aug 9 2006, 03:49 PM

wat is e tire pressure to pump for front and rear?? thanks

search reviewed too many results but tedious to look thru every page to see where is tire pressure

ok for the pressure is 225- 250kpa front and 250-290kpa back

[jamesgoh13]

Something to ask..

 

Anyone had installed the slider on ur S4? If having crashbar on,izzit alrite to install it or the crashbar will be good enuff?

 

Btw,which will u install 1st? Revtec or the slider?

[HondaSuperFourHSF]

if got engine guard then should be vtec first if not slider will come first. But do note. S4 slider is mount on casing. Other faring bike mount on faring. not on casing.

[bgoy]

Originally posted by HondaSuperFour(HSF)@Aug 9 2006, 09:50 PM

ok for the pressure is 225- 250kpa front and 250-290kpa back

thanks HSF

[chianicholas]

erm...new to sp4 family.....im riding a V tect2....wanna ask....everytime i change gear....there will b a loud *tuck* sound....izzit ok? :confused:

[xb84]

Originally posted by chianicholas@Aug 11 2006, 01:12 AM

erm...new to sp4 family.....im riding a V tect2....wanna ask....everytime i change gear....there will b a loud *tuck* sound....izzit ok? :confused:

change to first gear confirm loud tuck sound.

[Anthen]

Originally posted by onefour02@Aug 11 2006, 07:49 AM

change to first gear confirm loud tuck sound.

my 1st gear confirm got quite loud tuck.. i also dono why..

 

2nd gear as well as 3rd gear too..

 

4th gear onwards dun have liao..

 

izzit due to changes of engine oil or something to do with the crutch plates?

[choyster]

mine too.. however, if u can change fast, the sound will not be there. once clutch in, u straight away kick up, think the sound is due to the difference in the speed of the different gears engaging each other.

 

hope this helps.