SBF Silverwings Cafe 2008 - JDM/Euro 400/600

[SW9000]

bro, can settle later during the next gathering (probably 3rd week, 18 Nov at KKFC)?

i can tt you the payment if you need the cash urgently... we all gentlemen mah

thanks

 

Haha. Not urgent for cash.

Just that the plugs sharing too much of space with my D versions. hehehe.

 

18 Nov SW meet? Should be ok for me.

[SW9000]

Anyway you guys facing difficulty to access forum? i need to refresh many times before it appear. sometime need to wait 30 secs to load , sometime 1 sec..

 

 

Forum always busy de.... not enough bandwidth or it's time to upgrade hardware.

[SW9000]

Silverwing got PPL install those Dr pulley or those pollini clutch etc to improved its performance?

 

Not many ppl using Dr Pully. Heard no good for the variator.

 

I think the clutch bell will give up 1st. Saw a few SW with the bell spoilt, aka changed colour and internal surface very rough. Wonder what causes it?

 

If you encounter frequent clutch slip, then might want to invest in a set of after-market clutch and clutch bell. But hor, regular maintenance should be ok bah.

[scoobydoo]

hi peeps

we've got many new SWing riders joining the lot... lets gather ya, long time never gather liow

 

how is 18/11/2008, 7pm onwards at KKFC usual place (seats near where we park our bikes)? ending? the last time we ended near 2359

 

btw, is there anyone interested in PA2? i can try ask elson (eqpt extreme) if he's willing to bring a demo down for u to test test... dunno whether can do perm fitting on the spot if u confirm buying, else just make appt (he opens till quite late)

[scoobydoo]

hey peeps... i just saw a post selling SWing rear suspension... last price asked was $60 for the pair (negotiable)

Original Honda Silverwing FJS400 Rear suspension

[Andydy]

hey peeps... i just saw a post selling SWing rear suspension... last price asked was $60 for the pair (negotiable)

Original Honda Silverwing FJS400 Rear suspension

 

he posted $150 for the pair...

but sms-ed him, lowest is $50...

[SW9000]

Anybody ever tried to figure how to lock the handbrake lever (immobilise it from moving)?

Looking for a special locking device.

[bigcow]

Anybody ever tried to figure how to lock the handbrake lever (immobilise it from moving)?

Looking for a special locking device.

 

might as well disc lock your rear disc.

[scoobydoo]

might as well disc lock your rear disc.

i use the disc lock alarm (LAB $25) for the front and a thick motorcycle lock (mustafa $12+) ... economical and serves the purpose

front http://www.singaporebikes.com/forums/attachment.php?attachmentid=55078&stc=1&thumb=1&d=1205243728

rear (this type but not this one) http://www.getgeared.co.uk/core/media/media.nl?id=1744&c=731612&h=63b2227513e6a556f696

The idea behind all of this is not to make your bike "un-steal-able" … that will never happen. The idea is to make your motorcycle a very unappealing target, one that will take too much time, require too many tools, or make too much noise to steal easily. In short, one that the thief would rather not mess with.

[william_liu]

Anybody ever tried to figure how to lock the handbrake lever (immobilise it from moving)?

Looking for a special locking device.

 

If you can find a padlock with just the right length, think you can lock the brake lever against the handlebar grip, if it's tight enuff not to slide out sideways, think it may just work!

[Kris Rider]

Anybody ever tried to figure how to lock the handbrake lever (immobilise it from moving)?

Looking for a special locking device.

 

Thanks for the plugs !! and appreciate very much your coming down my area to deliver. Thanks to Helmet Box to for waking up early and getting there.

 

Owe both of you a meal - maybe on 18 Nov or 6-8 Dec join you on trip to Camerons.

 

About your query on locking the Handbrake - I carry an ABLOY door lock which has an extra looong loop and somehow this fits perfectly behind the hand lever after you pull it to the tightest point. Very effective - only thing it gives away the fact that there is a PARKING BRAKE. Will show you the lock when we meet.

[Kris Rider]

If you can find a padlock with just the right length, think you can lock the brake lever against the handlebar grip, if it's tight enuff not to slide out sideways, think it may just work!

 

One good Tip for those fitting DENSO plugs when they are NEW - Set the Gap to .80mm or check that it is close enough to this with a FEELER GAUGE. Then apply some high heat range grease or copper Anti Seeze to the new plug threads (not to much or that it gets onto the plug electrodes area) then finger thighten the plugs all the way till cannot move. Then tighten ONE FULL TURN with the plug wrench and the tool kit 10mm ring spanner. Stop. Then loosen back a few turns. Tighten again with fingers then using wrench tighten not more than 1/8 to 1/4 turn. Do all this with engine COLD.

[scoobydoo]

Anybody ever tried to figure how to lock the handbrake lever (immobilise it from moving)?

Looking for a special locking device.

 

If you can find a padlock with just the right length, think you can lock the brake lever against the handlebar grip, if it's tight enuff not to slide out sideways, think it may just work!

hmmm... is it possible to cut or rupture the rubber brake hose? if yes, then maybe this method of locking becomes ineffective liow

[greenday]

One good Tip for those fitting DENSO plugs when they are NEW - Set the Gap to .80mm or check that it is close enough to this with a FEELER GAUGE. Then apply some high heat range grease or copper Anti Seeze to the new plug threads (not to much or that it gets onto the plug electrodes area) then finger thighten the plugs all the way till cannot move. Then tighten ONE FULL TURN with the plug wrench and the tool kit 10mm ring spanner. Stop. Then loosen back a few turns. Tighten again with fingers then using wrench tighten not more than 1/8 to 1/4 turn. Do all this with engine COLD.

 

Got any difference if installing the plugs the 'normal' method?

Is there any performance difference?

[SW9000]

hmmm... is it possible to cut or rupture the rubber brake hose? if yes, then maybe this method of locking becomes ineffective liow

 

Effective against those not familiar with SW handbrake system.

They either miss the handbrake or don't know where exactly is the brake.

[HelmetBOX1605198525]

Thanks for the plugs !! and appreciate very much your coming down my area to deliver. Thanks to Helmet Box to for waking up early and getting there.

 

Owe both of you a meal - maybe on 18 Nov or 6-8 Dec join you on trip to Camerons.

 

About your query on locking the Handbrake - I carry an ABLOY door lock which has an extra looong loop and somehow this fits perfectly behind the hand lever after you pull it to the tightest point. Very effective - only thing it gives away the fact that there is a PARKING BRAKE. Will show you the lock when we meet.

 

18nov. dun think i'm able unless i would want to take a break from study all can ask joesph question:angel: :angel:

 

anyway my Vlight so lighted just now..

time to change belt..ZZZzzzz

[HelmetBOX1605198525]

SW being recall??

http://silverwing.org/cgi-bin/topic_show.pl?tid=2421

[HelmetBOX1605198525]

changing plug here is some guide.

 

http://silverwing.org/cgi-bin/topic_show.pl?tid=1364;pid=14325#pid14325

[scoobydoo]

18nov. dun think i'm able unless i would want to take a break from study all can ask joesph question:angel: :angel:

 

anyway my Vlight so lighted just now..

time to change belt..ZZZzzzz

wah lau ehh... kenna stressed

btw, i now kenna stressed by all the FRS changes taking effect 1 Jan 2009... some 吃饱太闲空 fella finding things to do... make changes here n there. e.g. balance sheet becomes "statement of financial position", cash flow statement becomes "statement of cash flow"... change name lik-dat also shiok... 换汤不换药

 

Vlight can reset one and ride longer... some pp change only after 30+k

[Scarab]

wah lau ehh... kenna stressed

btw, i now kenna stressed by all the FRS changes taking effect 1 Jan 2009... some 吃饱太闲空 fella finding things to do... make changes here n there. e.g. balance sheet becomes "statement of financial position", cash flow statement becomes "statement of cash flow"... change name lik-dat also shiok... 换汤不换药

 

Vlight can reset one and ride longer... some pp change only after 30+k

 

You're an accountant, too?

[thatone1]

Thanks for the plugs !! and appreciate very much your coming down my area to deliver. Thanks to Helmet Box to for waking up early and getting there.

 

Owe both of you a meal - maybe on 18 Nov or 6-8 Dec join you on trip to Camerons.

 

About your query on locking the Handbrake - I carry an ABLOY door lock which has an extra looong loop and somehow this fits perfectly behind the hand lever after you pull it to the tightest point. Very effective - only thing it gives away the fact that there is a PARKING BRAKE. Will show you the lock when we meet.

did i see cameron ??

 

who's going?

[HelmetBOX1605198525]

wah lau ehh... kenna stressed

btw, i now kenna stressed by all the FRS changes taking effect 1 Jan 2009... some 吃饱太闲空 fella finding things to do... make changes here n there. e.g. balance sheet becomes "statement of financial position", cash flow statement becomes "statement of cash flow"... change name lik-dat also shiok... 换汤不换药

 

Vlight can reset one and ride longer... some pp change only after 30+k

 

hahah

what to do.. now still got "ERP" see arleady also sainz.. need to put cashcard in...

ahahahah "end of reporting period".

sainz..

then FRS103 also got changes.. like Minority interest change to non-controllable interests.

 

luckly mine exam still using the old one. unlucky that i need to update myself:giddy:

[scoobydoo]

You're an accountant, too?

骗吃骗吃

[CCK]

FBA Plate Silver Wing 400 for Sale

 

Registered Sept 2006

COE till Sept 2016

Road Tax till Sept 2009

Bike original from Boon Siew

Euro Version

Grey Colour (same as in my avatar)

Mileage 40477 km

Accident Free

Drop Free

100% Stock Condition

Asking Price : 9.3k( View to neg.)

 

Black GIVI Maxia top box with brake lights

Headlight protector

 

All servicing done at Wonderful Motor, aka Botak

Engine oil changed every 3,000 km - 4,000 km

Oil Filter changed every oil change

 

Excellent condition, view to believe.

Contact : CCK 94792600

[william_liu]

How come selling bro?