Clutch grinding noise

[CSV]

I'm back.......with a new problem. seems like this bike is really determined to challenge my mastery over it.

 

Anyways, when I clutch in while moving/freewheeling, i hear this light grinding noise like Grrrr,grrr,grrrrr around the front sprocket area.

 

Does anyone know what caused this? It was fine before i sent it to Planet where Ah Chong tightened the chain abit since it was loose slightly.

 

Only happens when bike is moving, if i rev and clutch in while stationery, no sound. once i move off, clutch in and start to coast, the sound comes back again then if i re-engage the clutch, the noise is gone.

 

Clutch bearing?

Edited March 29, 2012 by CSV

[KiNkY PiNkY]

I'm back.......with a new problem. seems like this bike is really determined to challenge my mastery over it.

 

Anyways, when I clutch in while moving/coasting, i hear this light grinding noise like Grrrr,grrr,grrrrr around the front sprocket area.

 

Does anyone know what caused this? It was fine before i sent it to Planet where Ah Chong tightened the chain abit since it was loose slightly.

 

Only happens when bike is moving, if i rev and clutch in while stationery, no sound. once i move off, clutch in and start to coast, the sound comes back again then if i re-engage the clutch, the noise is gone.

 

Clutch bearing?

 

im not so pro about this but i guess maybe clutch bearing or clutch plate..im not so sure or acting to be smart alex but just guessing ^_^ if u got the answer PLEASE pm me learn by mistake and upgrade my motorcycle skill cheers bro

 

 

KiNkY PiNkY

[Koening]

it might be the clutch housing basket which holds the clutch plates. It might have went out of position and thus the grinding noise.

[CSV]

problem solved. chain was too tight thanks to Ah Chong. hahaha.

[kaiq]

Guess your chain is at the end of its life cycle.

[WanFazer]

Aiyah so many problem might as well change bike hehe......

[crazydj]

Aiyah so many problem might as well change bike hehe......

 

That's what they said...

 

But they dont understand that change bike is so much more expensive than repair bike.

[WanFazer]

That's what they said...

 

But they dont understand that change bike is so much more expensive than repair bike.

 

Save $$$ then buy brand new bike... If not enuf $$$ save, dun even dare to dream owning a bike... If still want to get n settle for cheap 2nd, 3rd or many hands bike, then dun expect too high... My current Gtr1400, insyaallah, will use it max 3-4 yrs then time to let go n get another new bike...

[crazydj]

Save $$$ then buy brand new bike... If not enuf $$$ save, dun even dare to dream owning a bike... If still want to get n settle for cheap 2nd, 3rd or many hands bike, then dun expect too high... My current Gtr1400, insyaallah, will use it max 3-4 yrs then time to let go n get another new bike...

 

That's why i don't dream to save for another bike. Talk is cheap. Everyone can say anything they want, but no money talk what.

[ben1112]

It's just an over-tighten chain FFS. Need to change bike meh?

[Lexanez]

Those 2 like to go at each other.

 

Anyway, blame Ah Chong. Must shout him!

[CSV]

thought i closed the thread liao.....just over tighten chain only mah.

 

 

Mods,can close thread?

[bernardk]

Save $$$ then buy brand new bike... If not enuf $$$ save, dun even dare to dream owning a bike... If still want to get n settle for cheap 2nd, 3rd or many hands bike, then dun expect too high... My current Gtr1400, insyaallah, will use it max 3-4 yrs then time to let go n get another new bike...

 

Hahaha rich in pocket but poor in EQ.

[WanFazer]

Hahaha rich in pocket but poor in EQ.

 

Hahaha u dunno anything so pls... Ssshhhhhh..

[WanFazer]

Hahaha rich in pocket but poor in EQ.

 

Hahaha u dunno anything so pls... Ssshhhhhh..