Honda NC700X

[samsontok]

Personally feel that engine is smooth around 3k rpm. At around 2k rpm, engine feels unwilling and jerky, gives me a feeling I'm in 1 gear too high.

 

According to what I read, 6th gear is for higher speed otherwise use up to 5th gear.

[samsontok]

Hi, currently riding Fz6 and would like to change to Nc7x. Would like to know more about the bike from Nc7x rider before i buy the bike. And what the price like for Otr w/out insurance? Thanks..

 

What you wish to know about the bike?

[G4an]

Want to know so far how the bike perform and is the bike is giving any problem

Is 19.1 oTr price reasonable for nc7x with abs or there is cheaper?? thanks

[samsontok]

Want to know so far how the bike perform and is the bike is giving any problem

Is 19.1 oTr price reasonable for nc7x with abs or there is cheaper?? thanks

 

So far this bike yet to give me any problem & as for price wise, I bought my NC700XA @ $18,000 inclusive of everything except insurance based on $2000 COE.

[samsontok]

Want to know so far how the bike perform and is the bike is giving any problem

Is 19.1 oTr price reasonable for nc7x with abs or there is cheaper?? thanks

 

So far this bike yet to give me any problem & as for price wise, I bought my NC700XA @ $18,000 inclusive of everything except insurance based on $2000 COE.

[G4an]

Bro, which bike shop you get your bike from? As my 19.1 is include of current Coe (1800) and insurance and everything..

[samsontok]

Bro, which bike shop you get your bike from? As my 19.1 is include of current Coe (1800) and insurance and everything..

 

I bought it from ASP

[newblood]

Sure, there are few main reasons why I choose a main stand are:

1) Service of chain

2) washing of rims

3) check engine oil level (require upright position)

4) not possible to engage gear when side stand down (when is require unless bypass switch)

 

cant wait for the arrival of the main stand bro..

[bitx]

According to what I read, 6th gear is for higher speed otherwise use up to 5th gear.

Yes, most of the time on 5th on normal roads and 6th on expressways, speed around 100km/hr. can't wait to hit my 500km

 

Bro, which bike shop you get your bike from? As my 19.1 is include of current Coe (1800) and insurance and everything..

Where did u get ur quote from? They have existing stock? Understand price will increase for next shipment.

[blurrblurr]

Yes, most of the time on 5th on normal roads and 6th on expressways, speed around 100km/hr. can't wait to hit my 500km

 

 

Where did u get ur quote from? They have existing stock? Understand price will increase for next shipment.

I just got to read about the mishap of your bike. I think BS shall not charge you at all. There is this lemon law which may help u in this case.

http://www.asiaone.com/Business/News/SME%2BCentral/Story/A1Story20120309-332599.html

[G4an]

Yes, most of the time on 5th on normal roads and 6th on expressways, speed around 100km/hr. can't wait to hit my 500km

 

 

Where did u get ur quote from? They have existing stock? Understand price will increase for next shipment.

 

HLC, their stock oso take from other bike shop..

[samsontok]

HLC, their stock oso take from other bike shop..

 

If you are looking for NCS, there are 3 pcs available now at ASP.

[newblood]

went down to mtechnik.. shipment will arrive on late tuesday..

 

anyone wana go down together on wed morning for installation..??

 

will be buying rack and baseplat, journey TC50 top box (black color ones) with backrest and top rack..

[bitx]

I just got to read about the mishap of your bike. I think BS shall not charge you at all. There is this lemon law which may help u in this case.

http://www.asiaone.com/Business/News/SME%2BCentral/Story/A1Story20120309-332599.html

It happened during riding, not so much on a manufacturer's defect. It's going to be very hard to go along that line. What is most impt is to get it repaired. Thank goodness all's well now.

 

 

went down to mtechnik.. shipment will arrive on late tuesday..

 

anyone wana go down together on wed morning for installation..??

 

will be buying rack and baseplat, journey TC50 top box (black color ones) with backrest and top rack..

Finally it's here! Wonder if the crash bar will arrive the same time?

 

I may not be able to make it on wed, most prob go down either on thurs morning or late afternoon. Do you know what time they're open for business?

[newblood]

 

Finally it's here! Wonder if the crash bar will arrive the same time?

 

I may not be able to make it on wed, most prob go down either on thurs morning or late afternoon. Do you know what time they're open for business?

 

the crash bar and mainstand will arrive at the same time.. so many items for the NCX.. am still searching crashbar for NCS.

Tel: +65 6844-8973

can juz gv them a kol for their opening hours.

[newblood]

anyone knows how much is the crash bar from givi and hepco..??

[samsontok]

Hope you guys dun be impulse & show your keen face, just my 2 cents advice.

[samsontok]

I dun wan u guys be a carrot.

[bitx]

the crash bar and mainstand will arrive at the same time.. so many items for the NCX.. am still searching crashbar for NCS.

Tel: +65 6844-8973

can juz gv them a kol for their opening hours.

Thanks for the number. Confirmed you going down on wed?

 

anyone knows how much is the crash bar from givi and hepco..??

Givi SRP 250, not including labour which may cost $30 thereabouts when I enquired at Mah. Hepco should cost 270 thereabouts.

 

Hope you guys dun be impulse & show your keen face, just my 2 cents advice.

Haha, ok.. Will show my ai mai face when I'm there.

[samsontok]

Shall we meet if going on Wednesday?

[bitx]

I prefer thurs morning. Wed maybe abit rush for me.

[fuddlybob]

Hi Guys! New to this thread.. Been riding my NC700X for 2 months redi. First few to get them i suppose.. haha.. Juz got back from a round-malaysia trip (1700km). Feeling good bout the bike. Juz need to get taller windshield, crashbars n pannier racks. anyways do call me up if there's any NC7X gatherings!

[kmjoe]

went down to mtechnik.. shipment will arrive on late tuesday..

 

anyone wana go down together on wed morning for installation..??

 

will be buying rack and baseplat, journey TC50 top box (black color ones) with backrest and top rack..

 

me maybe... im getting rack and crashbar amd wait for the junior tc55...

[samsontok]

Hi Guys! New to this thread.. Been riding my NC700X for 2 months redi. First few to get them i suppose.. haha.. Juz got back from a round-malaysia trip (1700km). Feeling good bout the bike. Juz need to get taller windshield, crashbars n pannier racks. anyways do call me up if there's any NC7X gatherings!

 

Hi, welcome. Where u got your bike from?

[kmjoe]

Hi Guys! New to this thread.. Been riding my NC700X for 2 months redi. First few to get them i suppose.. haha.. Juz got back from a round-malaysia trip (1700km). Feeling good bout the bike. Juz need to get taller windshield, crashbars n pannier racks. anyways do call me up if there's any NC7X gatherings!

 

bro curious about ur trip in msia, how do u carry all ur luggage? i was lucky to have space on buddy's bike/car tts y no need worry too much... cox no tc or side panniers yet... how bout u