Honda NSR150SP Riders

[LuciferD]

Originally posted by willy83@Aug 14 2005, 02:48 AM

nah its not stupid.. its a learning qns..

lift the back of e bike..

i usually stand on the left side(where side stand is)den 1 hand hold on to pillion footpeg ard dat part and lift toward yr side.. and spray wif other hand lo..

abit mafan la..

 

 

 

nah.. dun tink its wise to do it after rain.. best apply after a ride while chain is hot..

and leave it for over night lo..

thankx man...

juz check out u all got any diff ways?

 

for me i squat near the rear and use my right kneel to support the yan kong there.. then can turn the tyre with one hand and spray with the other...

[bgoy]

Originally posted by doremo@Aug 13 2005, 11:17 PM

u sure got speed camera there???? :giddy: yday i was at 130km/h there too.... duns cared me....

wah doremon u become racer liao ah!!

[ZLord]

Originally posted by JackoFIRE@Aug 13 2005, 08:28 PM

Hi guys i just got my 2b license on thursday,and i decided to get a SP.

Can u guys give me advices on which motor diam to look for this bike or rather,any private seller around? and what are the new insurance price for SP? now that only the newest rider in the family is counted in the insurance.sorry for asking these newbie questions man.. thanks..

If you intend to buy from a motorshop, bring an experienced friend along with you, at least he will try to help you avoid the danger of being chop. As for private seller, look for them either in garage sales or classifieds

 

Insurance would depend on your age and road experience, from what i see it would be quite expensive for you now...third party should be near $400

[Guest doremo]

Originally posted by bgoy@Aug 14 2005, 04:09 AM

wah doremon u become racer liao ah!!

suan me :mad:

[Chubb]

morning.. sianz duty.. zzz..

[LuciferD]

Yoz, morning everyone........

[craz_03]

mOrniNgz EvEryOne...

i qUiTe LonG b0h PoSt LiaOZ...

heheee

[1tym]

Originally posted by bgoy@Aug 14 2005, 04:09 AM

wah doremon u become racer liao ah!!

:bouncefire:

[jonse]

morning all

[mightymike]

Originally posted by mobilone@Aug 14 2005, 02:56 AM

thankx man...

juz check out u all got any diff ways?

 

for me i squat near the rear and use my right kneel to support the yan kong there.. then can turn the tyre with one hand and spray with the other...

same same.... lol

[J]

Originally posted by jiaxing85@Aug 13 2005, 10:17 PM

Self-install?

I self-install 1. Just plug out the storn horn cable & plug in stebel horn 'high' horn only. Then can use liao loh...

[JackoFIRE]

Originally posted by ZLord@Aug 14 2005, 04:45 AM

If you intend to buy from a motorshop, bring an experienced friend along with you, at least he will try to help you avoid the danger of being chop. As for private seller, look for them either in garage sales or classifieds

 

Insurance would depend on your age and road experience, from what i see it would be quite expensive for you now...third party should be near $400

thanks alot,zlord..

[J]

Originally posted by Andy ar@Aug 14 2005, 12:10 AM

guys.. how often u all lub chain?? btw is o ring good??

don mind me asking stupid question huh....

how u guys do it alone?

 

O-ring is enough gd for SP & other bike. It can low down noisy sound from chain. Every time we do it after wash bike. Better u hav carjack if don go scaredyard buy only $10 only. U use carjark easy to clean chain & put chain lube. We clean chain link 1 by 1 link & clear sprocket oso. After that just put the chain lube...

[Guest 6.5rpm]

thanks for the reply.. btw may i know how much its a HRC chain guard??

[CivicR]

Guys if after acceleration and stop by my rpm is stand at 3000 rpm is the problem lies with the throttle or the fuel pin. example if in normal idling point and I pull the choke the rpm will throw very drastic. Any idea whats wrong? My idling have been ard 1.4 to 1.5 rpm not long after I change the fuel pins.

[Junyi]

Guys, ur MSN chat can log in nt?? mine cant leh..

[DM]

Originally posted by CivicR@Aug 14 2005, 06:20 PM

Guys if after acceleration a the fuel pins.

most probably fuel pins. try readjusting your idling again

[CivicR]

need to go planet liao lor, cos its done by them woah. Does Vector1 do it cos I'm planning to go visit them for the brake hose thingy.

[J]

Originally posted by Andy ar@Aug 14 2005, 01:58 PM

thanks for the reply.. btw may i know how much its a HRC chain guard??

Taht HRC chain guide is chiong 1 lah, don change better cos no support can support & tigh u brake hose. If u wan, u can found it at LAB. I think is ard $8-$10 doller loh...

 

 

 

 

Guys if after acceleration and stop by my rpm is stand at 3000 rpm is the problem lies with the throttle or the fuel pin. example if in normal idling point and I pull the choke the rpm will throw very drastic. Any idea whats wrong? My idling have been ard 1.4 to 1.5 rpm not long after I change the fuel pins.

 

I think u go tuning better. My rpm is ard 1000 rpm when i stop loh. Rpm pls don too high, waste petrol & u engine very fast hot...

[J]

Originally posted by CivicR@Aug 14 2005, 10:03 PM

need to go planet liao lor, cos its done by them woah. Does Vector1 do it cos I'm planning to go visit them for the brake hose thingy.

Wow!!! U wan visit Vector 1 to change HEL brake hose ah, Hel brake hose very gd & nice oh. If i not wrong 1 pair they coat ard $160-$170 loh...

[jonse]

wa...

so x???

but hel is better more nice got color...

not like mine...

swdge no color

[J]

Originally posted by jonse@Aug 14 2005, 11:21 PM

wa...

so x???

but hel is better more nice got color...

not like mine...

swdge no color

Ya! HEL brake hose was very x but can 99.99% make u brake work propely & very eat. So, is for u own safety abit expensive oso nvr mind. Right? I oso interested but wait for my 2A 1st. Haha...

[jonse]

ya...

i think for the front enough le....

no nid both

[MC28]

Originally posted by [J]@Aug 14 2005, 01:46 PM

I self-install 1. Just plug out the storn horn cable & plug in stebel horn 'high' horn only. Then can use liao loh...

It's recommended to go thru the relay provided as well as a additional fuse to safeguard it..The way which u mount isnt proper and may kill/drain off ur battery..

 

As for brake hose, there isnt a need to change both front and back..If u happen to have a sensitive leg, u will tend to fishtail ur bike should the need for immediate braking comes in..

[Guest 6.5rpm]

Originally posted by [J]@Aug 14 2005, 01:54 PM

 

O-ring is enough gd for SP & other bike. It can low down noisy sound from chain. Every time we do it after wash bike. Better u hav carjack if don go scaredyard buy only $10 only. U use carjark easy to clean chain & put chain lube. We clean chain link 1 by 1 link & clear sprocket oso. After that just put the chain lube...

hmm.. where is scaredyard?

 

so wat u use to clean the chain n sprocket? sorry, newbie here hehe..