[Group] YAMAHA Fazer

[vanselle]

or u cud 4get the RPMs and do a dyno break in!

 

i thinking of doing the Dyno Run in.

Faster and will do gd for ur engine for long term.

[Need4speedz]

i thinking of doing the Dyno Run in.

Faster and will do gd for ur engine for long term.

 

where to do this dyno run in may i ask? And hw much will it cost? Any diff with the normal run in?

[DaBonz]

oh isit? hmm...actually heard their service is lo**y, bt nvr went there though.So where else do u recommend to all fazeriers(affortable & reliable)?

 

.. u never been there but u recomend?

 

I recomend all fazerions to find their own werkshop.. diff peeps are comfortable at diff places.. 4 me, I dun mind paying a bit more for peace of mind so I usually go to motorworld or unity.(not recomending, jus saying where I go) but dats just me.. I'm sure everyone here has their own place they like.

 

It's very hard to get affortable & reliable at one place..usually u scarifice one for the other...

[Xgrind]

Read The F#cking Manual

 

And by the way, wat is RTFM??

[X-Fazed]

Hi all..

Can anyone advice mi on wat is the FC for fz6 and fz1?

Thank you.

 

Worried abt FC & cost of petrol rising...........

 

Get a pulsar!

[Xgrind]

Maybe I'm just old school, I prefer the old school way of breaking in despite my mechanic's recommendation

 

Ya, he told me dyno break in will not affect the engine since it's in a controlled environment.

 

or u cud 4get the RPMs and do a dyno break in!

[Xgrind]

Ditto to that.

 

If worry about petrol and FC, get a 2B bike. If want a CL2 bike, these have to throw out of the window

 

Worried abt FC & cost of petrol rising...........

 

Get a pulsar!

[DaBonz]

i thinking of doing the Dyno Run in.

Faster and will do gd for ur engine for long term.

This is debatable. Sum peeps say yes sum say no. I did mine on a dyno n so did several other frens on various bikes. No problems so far.

 

where to do this dyno run in may i ask? And hw much will it cost? Any diff with the normal run in?

 

SG has 2 dyno machines. One at Unity at bukit merah. I can't remember the other. I think it's at Ubi. I did mine at unity and it cost me SGD 80. Took abt 3hrs for 3 cycles.

 

Lots of diff between a soft and a hard run in. See this,

 

http://www.mototuneusa.com/break_in_secrets.htm

 

Again, not recomending. Just sharing experiences. It entirely up to you how u wanna break in ur engine.

[X-Fazed]

If want a CL2 bike, these have to throw out of the window

 

Yar! Dun think, dun ask abt FC. Its taboo with CL2 bikes.

[DaBonz]

Hi all..

Can anyone advice mi on wat is the FC for fz6 and fz1?

Thank you.

 

320km n 280km per full tank incl reserve

[DaBonz]

Yar! Dun think, dun ask abt FC. Its taboo with CL2 bikes.

 

Ok wat... if can ask abt affordable werkshops, y not ask abt FC for CL2 bikes..

[X-Fazed]

Ok wat... if can ask abt affordable werkshops, y not ask abt FC for CL2 bikes..

 

Cos workshops prices & workmanship varies. FC & petrol beyond control.

[Speedpass]

bro so jia lat ar

y not buy gen1 batt?

my $65 dunno wat brand battery still going strong(bought from LAB)

 

I m trying to c if i could still charge the batt anot , anyway , m standing by LAB batt , juz in case , no use going for the original $200 5 mth use only battery from yamaha .

[Speedpass]

Dun buy wrong battery again hor.I dun need to change mine yet.

 

I think its better you get a battery tender charger better.

 

Where to buy ?

[DaBonz]

Cos workshops prices & workmanship varies. FC & petrol beyond control.

 

aww c'mon.. wkshp prices may vary but not a lot... same thing mah.. u want cheap wkshp prices ride an RXZ. Can send to any shop in SG n JB!! But for CL2.. put it in the wrong hands n u'll pay for it dearly...

[X-Fazed]

aww c'mon.. wkshp prices may vary but not a lot... same thing mah.. u want cheap wkshp prices ride an RXZ. Can send to any shop in SG n JB!! But for CL2.. put it in the wrong hands n u'll pay for it dearly...

 

Errr..........Maybe its me but I think workshop recommendation vs FC is totally diff. Its not an apple for apple comparison.

[y2kredbull]

Fellow Bros, i need recommendations for 06'Fz6 end cans badly. Cant tahan the look and sound of the stock exhaust. i call Motoworld for Remus, they say Remus cost 1.6k and above, O.O. No stock even if i wanna spend the dough. Need to order and wait till April. They have Yoshi titanium in stock but i dun like the shape of yoshi on the Fz6. Any other recommendation? Pls tell me the shop that carries watever pipe that u'll b recommending so i can go chk it out. Thanks Bros!

 

I'm using Leo Vince Aluminium cans for my FZ6 '06. Not bad and quite reasonably priced. 1.1k with inspection(have to go myself). Wanted CF ones but not enough budget.Surveyed the Yoshi and yes the looks put me off.

 

Perhaps u can try the GPR CF.Quite nice the new design.1.3k.Performance wise not sure.U can PM the GPR guy in the Advertiser thread.

 

Micron,Arrow and Akrapovic i asked b4 was 1.6k.

[y0s_bikey]

can try giannelli too, price kind of steep but comes with mid pipe too dats wat they quoted...

[Xgrind]

Racewerkz @ Alexandra Village had one installed late last year too

 

This is debatable. Sum peeps say yes sum say no. I did mine on a dyno n so did several other frens on various bikes. No problems so far.

 

 

 

SG has 2 dyno machines. One at Unity at bukit merah. I can't remember the other. I think it's at Ubi. I did mine at unity and it cost me SGD 80. Took abt 3hrs for 3 cycles.

 

Lots of diff between a soft and a hard run in. See this,

 

http://www.mototuneusa.com/break_in_secrets.htm

 

Again, not recomending. Just sharing experiences. It entirely up to you how u wanna break in ur engine.

[Need4speedz]

.. u never been there but u recomend?

 

I recomend all fazerions to find their own werkshop.. diff peeps are comfortable at diff places.. 4 me, I dun mind paying a bit more for peace of mind so I usually go to motorworld or unity.(not recomending, jus saying where I go) but dats just me.. I'm sure everyone here has their own place they like.

 

It's very hard to get affortable & reliable at one place..usually u scarifice one for the other...

 

Thousand apologises. Recomend there as it sells quite a wide range of brands.Services nt included. Could jus get the end can & get it done in another shop.

[maxxmadness]

issit?!!! lucky u highlight! if not newbies like me will kena con!

 

no offensse ah bro max.. we just kidding ard

 

 

 

i suspect a conspiracy here...

[maxxmadness]

on the topic of running in...to me the thrill of buying a brand new bike is that thrill of running in the bike painstakingly...enjoying the slow pace of life while the engine breaks-in..now that priceless...I wont pay anyone or put my bike on some machines to run-in..

 

anyway, most engines are already factory run in these days, we are just doing the last procedure of the running in process

[maxxmadness]

Short LKS!

Place : KTM

Date : 15th Jan - tonite!

Time : 8+ pm till not so late 2morow mornin werkin u know

 

alamak!!! today then see this post, newbies like me should attend at least 1 of this LKS to learn from the oldies...

[DaBonz]

Racewerkz @ Alexandra Village had one installed late last year too

 

isnt dat at bukit merah? I never noticed another dyno there. Must check it out next time I'm there.

 

Thousand apologises. Recomend there as it sells quite a wide range of brands.Services nt included. Could jus get the end can & get it done in another shop.

 

Still wudn't. Quite a few horror stories from there... I was witness to sum.

 

i suspect a conspiracy here...

 

where? who? when?

 

on the topic of running in...to me the thrill of buying a brand new bike is that thrill of running in the bike painstakingly...enjoying the slow pace of life while the engine breaks-in..now that priceless...I wont pay anyone or put my bike on some machines to run-in..

anyway, most engines are already factory run in these days, we are just doing the last procedure of the running in process

 

yup, like I said, its ur bike so its up to u.

 

alamak!!! today then see this post, newbies like me should attend at least 1 of this LKS to learn from the oldies...

 

oops.. dis was my 1st time too! I learned a lot from the oldies!

[Need4speedz]

on the topic of running in...to me the thrill of buying a brand new bike is that thrill of running in the bike painstakingly...enjoying the slow pace of life while the engine breaks-in..now that priceless...I wont pay anyone or put my bike on some machines to run-in..

 

anyway, most engines are already factory run in these days, we are just doing the last procedure of the running in process

 

A good point there..uppzz..