[Group] HYOSUNG Comets

[flealancer]

next weekend? Saturday is good cause some bike shop open... even Auntie Shop... can even go JB together.... go bike shop, eat, top up fuel chat and enjoy our saturday... how about that... Gaban can lead us in JB... He's quite good with the direction there... I can direct to Auntie Shop etc

 

this saturday got exam.

next saturday is off day!

go early morning better, evening time i can still go out with family members.

[yinghai]

Yeap, i went there to enquire about the overhaul.. But i calculate, total cost should be about 300 plus.. I donnue how come so expensive.. I waiting for mr lee to get back to me on the piston, conrod, bearing, gasket.. If cheaper than hlc, then will be shipping in..

[SC Gaban]

some scrapyard add i dig on the net.

 

Chop Kim Huat

 

Address : 8 Sungei Kadut Street 2

 

Phone : 63652081

 

 

ECO Resource Recovery Centre Pte Ltd

 

Address : 40 Tuas West Road

 

Phone : 68615515

 

 

Hon Li Hin Junk Yard

 

Address : 11 Sungei Kadut Street 4

 

 

Hup Lee Leong Hardware Pte Ltd

 

Address : 26 Sungei Kadut Street 3

 

Phone : 63635055 / 63670019

 

 

Kim Hock Corporation Pte Ltd

 

Address : 10 Benoi Road

 

Phone : 68623883

 

 

King's Metal (S) Pte Ltd

 

Address : 16 Pioneer Sector 2

 

Phone : 8621955

 

 

Lim Asia Steel Pte Ltd

 

Address : 11 Pioneer Sector 3

 

Phone : 96648853

 

 

 

Scrap Car Shop

 

Address : 74 Sungei Kadut Street 1

 

Phone : 63679266

[yinghai]

Bro, the listed is lorry, car, metal scrap shop.. I only know, pioneer road there got one very good shop.. I will get my next week schedule by sunday, then will confirm with u all when can go scrapyard..

[Phantom Hellfire]

Bad day for me.... Just skidded while pillion riding my wife today around 3 plus... i didn't notice the oil on the bend... i grazed my right shin, size of a half a cd. My wife is ok... only minor bruised on the palm... That Punggol bend... damn... my rstaichi raincoat pants shredded . My left koso mirror was sacrificed during the skiddin' (confuse atm.... drop on the right but left mirror break)... no scratch on the bike though... i guess my right leg save it...

Edited July 22, 2010 by Phantom Hellfire

[Phantom Hellfire]

So, next saturday... who's coming?

 

1. Me - PH

2. Gaban

3. flealancer

 

anymore joining? come leh, wanna see all the comets...

[Phantom Hellfire]

eh?? since wen i become a lead bike?:sian:

 

Ever since you brought me to JB . And since u r more pro on the route u lead bike arh....

Edited July 22, 2010 by Phantom Hellfire

[yinghai]

If i free i come along.. But what time??

[SC Gaban]

Bad day for me.... Just skidded while pillion riding my wife today around 3 plus... i didn't notice the oil on the bend... i grazed my right shin, size of a half a cd. My wife is ok... only minor bruised on the palm... That Punggol bend... damn... my rstaichi raincoat pants shredded . My left koso mirror was sacrificed during the skiddin' (confuse atm.... drop on the right but left mirror break)... no scratch on the bike though... i guess my right leg save it...

 

wish u n ur wife fast recovery,

[SC Gaban]

Bro, the listed is lorry, car, metal scrap shop.. I only know, pioneer road there got one very good shop.. I will get my next week schedule by sunday, then will confirm with u all when can go scrapyard..

 

really ah? dat i dono cos i havent made enquiries with them yet. the one dat u went at pioneer rd, do they have scrap bikes? can pas me the add? tel? thnx.

[yinghai]

Its at tractor road there.. I go look up for the address.. At the time being.. My bike now is becoming worst.. Totally no power... Top at 70-80, my chain tensioner starts to leak also.. Sianz..

[SC Gaban]

Its at tractor road there.. I go look up for the address.. At the time being.. My bike now is becoming worst.. Totally no power... Top at 70-80, my chain tensioner starts to leak also.. Sianz..

 

bro, my guess is dat ur case is the same case as PH. i suggest u check ur carb for any leakage. the air might be escaping from a crack somewhere in ur carb, preventing more combustion, thus, reduce in accelaration...... whoa!! did i jsut said that?

[yinghai]

Er, its more air into the engine, when the piston goes down, it sucks 11-21:1 air/fuel from the carb, this vacumm also controls the slide of our carburretor.. So should there be any leakage at the manifold, the carb slide wont have enough vacuum operate efficiently, thus getting bad throttle respond. And at the same time, the engine will suck air from the carb and the leakage making the bike run more than 21:1 aka lean condition that leads to poor power delivery..

[yinghai]

Totally stress about my bike...

[SC Gaban]

Er, its more air into the engine, when the piston goes down, it sucks 11-21:1 air/fuel from the carb, this vacumm also controls the slide of our carburretor.. So should there be any leakage at the manifold, the carb slide wont have enough vacuum operate efficiently, thus getting bad throttle respond. And at the same time, the engine will suck air from the carb and the leakage making the bike run more than 21:1 aka lean condition that leads to poor power delivery..

 

wat scientific explanation! :D btw, u riding d 250 or 125?

[SC Gaban]

went to test my blade fron singapore to simpang renggam, malaysia: 120/130km/h on highway+rainy weather+stupid slow lorries that cut in lane without signaling+wind pressure = stomach upset. took breakfast at simpang renggam, den shoot back to jb to find a toilet.

[Phantom Hellfire]

went to test my blade fron singapore to simpang renggam, malaysia: 120/130km/h on highway+rainy weather+stupid slow lorries that cut in lane without signaling+wind pressure = stomach upset. took breakfast at simpang renggam, den shoot back to jb to find a toilet.

 

Woah... Not a great day for you, bro... But guess it's great testing the blade at JB highway...

[Phantom Hellfire]

Btw... does anyone know where i can buy a replacement visor for my AGV Spectre... it's quite a vintage ff helmet... my wife's visor got a cracked, 1 long crack...

[SC Gaban]

Btw... does anyone know where i can buy a replacement visor for my AGV Spectre... it's quite a vintage ff helmet... my wife's visor got a cracked, 1 long crack...

 

u mean tinted visor for pilion? u can go ah boy at kelantan lane or jb to check it out.

[yinghai]

I used to work in a bike/car shop and i study automotive technology.. For visor, can try ebay, good place to shop for parts.. Im riding a 125 looking for a 250.. Just a bike for my project use..

[SC Gaban]

I used to work in a bike/car shop and i study automotive technology.. For visor, can try ebay, good place to shop for parts.. Im riding a 125 looking for a 250.. Just a bike for my project use..

 

wat sort of project?

[Phantom Hellfire]

u mean tinted visor for pilion? u can go ah boy at kelantan lane or jb to check it out.

 

I don't mind if it's not tinted... as long get new visor shud be ok... I guess if cannot get at ah boy... have to get at jb then

[yinghai]

wat sort of project?

 

Hard to explain.. The reason i chose this bike for my project is becos of the 4 valve dohc twin.. I believe the engine is quite powerful.. The manufacturer wanna cut cost, so r&d and parts use were cheap and heavy.. The engine is capable of doing high rev.. If can hit 16k rpm, i believe it should be powerful..

[yinghai]

Ph, you have spare cam chain tensioner right?? Can i have it?? I planning to make manual cam chain tensioner..

[Phantom Hellfire]

Ph, you have spare cam chain tensioner right?? Can i have it?? I planning to make manual cam chain tensioner..

 

sure... no problem...