[Group] YAMAHA RXZ

[velocity325]

Oooooo... Wahhh!!! I like I like!!! Teach me................. I'm just in need of pneumatic and impact tools, other than tat, I think I shld be alrite. U mentioned "some motocross" parts. Internals or externals? Dah pasang balik? How does it run now if so... (Sori bnyk ques, I'm excited! Hehe...)

 

Anyway void deck eh, no in Jrg hse thgh coz I kena a lot of times alrdy; I think the old ppl over ther dnt like me... Mayb over at my folks hse at BB shld b fine...

 

and and and , i love the black soft/hard mallet..so cute..~~~

[faris]

Hahah bro u need to get magnet puller, impact screw driver, 1 x puller to take out the crank and 1 x puller to insert back the crank (shape like a throttle grip) i dont have the puller so i just send to the pressing shop to ask them open free of charge lah. Yes i agreed really need a proper place for the knocking and all that stuff.

 

Currently my brake pump got some leaking so i didnt ride it around much. Just purchase bel ray s2 mineral 2T for the running in stage. And iam very surprised that the bike ideal really well and start easily. Iam running premix for 20ml per litre. And the motorcross parts is like the air filter (forgot the brand), vforce 3, keihin and maybe hydraulic clutch system.

[stinkybutt]

and and and , i love the black soft/hard mallet..so cute..~~~

 

Sumone has fetish for a rubber mallet over here!

ahahaha...

 

[syamitomo]

and and and , i love the black soft/hard mallet..so cute..~~~

 

Alamak bro... Tat one also I hav lah; a must hav for all mechs-alike... Hehehe...

 

Sumone has fetish for a rubber mallet over here!

ahahaha...

 

[ATTACH=CONFIG]239643[/ATTACH]

 

LOL!!!

 

Hahah bro u need to get magnet puller, impact screw driver, 1 x puller to take out the crank and 1 x puller to insert back the crank (shape like a throttle grip) i dont have the puller so i just send to the pressing shop to ask them open free of charge lah. Yes i agreed really need a proper place for the knocking and all that stuff.

 

Currently my brake pump got some leaking so i didnt ride it around much. Just purchase bel ray s2 mineral 2T for the running in stage. And iam very surprised that the bike ideal really well and start easily. Iam running premix for 20ml per litre. And the motorcross parts is like the air filter (forgot the brand), vforce 3, keihin and maybe hydraulic clutch system.

 

I see... Hmmmm... Ok. Loudness one day u go shopping wif me for tis stuffs. Ahakz...

 

Anyway, the Aprillia brake calliper; is it their own parts or does brands like Brembo or others supplies them? If so, how many pots? And how's the braking power like?

[velocity325]

Alamak bro... Tat one also I hav lah; a must hav for all mechs-alike... Hehehe...

 

 

hahas..i would have one is a few years time !!

 

Sumone has fetish for a rubber mallet over here!

ahahaha...

 

[ATTACH=CONFIG]239643[/ATTACH]

 

waa , don't like that leiis bro !! it's like something hard but soft..so gentle..aww !

[LoudnessFz]

bro syam..when u wanna go shop for those things?feel like doing on my 125 too..but just thinking..haha

 

when u set when u wanna go then text me lah at 90914631..my com now needs some top overhaul so idk when i can be online..this com hangs almost every random time..

 

velocity..that mallet u can buy at a cheap price right?go buy one lah hahaha

[faris]

top overhaul more faster and easier lah. Anyway syamitomo aprilia caliper is good. difference can be up to 70% and its a 2 port caliper. (2 on each side) Iam selling them. Grimeca is the company that made the calipers. It does not come from brembo. I do have 2 x brembo from cagiva mito in stock. Never used them before but i feel like giving it a try after i purchase an extra wheelsets for my track session... right now if i fix the brembo its dangerous because i fall down many time because of using sotong tyre with aprilia calipers.

[Suhaimss]

i am using motul..ive been using motul for a long time already, my bike started becoming hot easily just recently

[Suhaimss]

Using wat EO boss? XP

i am using motul..ive been using motul for a long time already, my bike started becoming hot easily just recently

[syamitomo]

bro syam..when u wanna go shop for those things?feel like doing on my 125 too..but just thinking..haha

 

when u set when u wanna go then text me lah at 90914631..my com now needs some top overhaul so idk when i can be online.

 

Ok noted bro. Will msg u wen I got my dough! Any particular plc?

 

top overhaul more faster and easier lah. Anyway syamitomo aprilia caliper is good. difference can be up to 70% and its a 2 port caliper. (2 on each side) Iam selling them. Grimeca is the company that made the calipers. It does not come from brembo. I do have 2 x brembo from cagiva mito in stock. Never used them before but i feel like giving it a try after i purchase an extra wheelsets for my track session... right now if i fix the brembo its dangerous because i fall down many time because of using sotong tyre with aprilia calipers.

 

Oic... Then it dsnt make any diff wif our Z's original 2 pot calipers. Thght its an upgraded 4pot coz the way I see Z riders goin gaga ovr it was for the performance. Check2 just for the name aje! Lol! XP Anyway thanx for the heads-up!

 

i am using motul..ive been using motul for a long time already, my bike started becoming hot easily just recently

 

Oic... Anythn else aside frm just changing EO? Setting? Bt then agn Motul nye oil memang tipis therefore bahang lh ur bike...

[Problematic]

Oic... Anythn else aside frm just changing EO? Setting? Bt then agn Motul nye oil memang tipis therefore bahang lh ur bike...

 

bro syam, then what do you recommend for EO and its rating like 10W50 or 10W40 what? Thank you in advance

[zairul89]

anyone please help me..i need to know where is the scrap motorcycle shop in singapore,,

please send me an email because i'm new here..nzmzairul@yahoo.com

[stinkybutt]

top overhaul more faster and easier lah. Anyway syamitomo aprilia caliper is good. difference can be up to 70% and its a 2 port caliper. (2 on each side) Iam selling them. Grimeca is the company that made the calipers. It does not come from brembo. I do have 2 x brembo from cagiva mito in stock. Never used them before but i feel like giving it a try after i purchase an extra wheelsets for my track session... right now if i fix the brembo its dangerous because i fall down many time because of using sotong tyre with aprilia calipers.

 

So,if fixed onto our bike correctly,the difference can be felt with more braking power?

 

Oic... Then it dsnt make any diff wif our Z's original 2 pot calipers. Thght its an upgraded 4pot coz the way I see Z riders goin gaga ovr it was for the performance. Check2 just for the name aje! Lol! XP Anyway thanx for the heads-up!

 

Our brake isit 2 pot or 1 pot? haf 1 cylinder aje kan so its 1 pot right?

[Suhaimss]

Nothing else, and btw bro, you guys talking about setting, im kind off a newbie on rxz, what setting is actually, the correct setting, a soo called perfect setting for rxz, mind sharing?

Ok noted bro. Will msg u wen I got my dough! Any particular plc?

 

 

 

Oic... Then it dsnt make any diff wif our Z's original 2 pot calipers. Thght its an upgraded 4pot coz the way I see Z riders goin gaga ovr it was for the performance. Check2 just for the name aje! Lol! XP Anyway thanx for the heads-up!

 

 

 

Oic... Anythn else aside frm just changing EO? Setting? Bt then agn Motul nye oil memang tipis therefore bahang lh ur bike...

[faris]

So,if fixed onto our bike correctly,the difference can be felt with more braking power?

 

 

 

Our brake isit 2 pot or 1 pot? haf 1 cylinder aje kan so its 1 pot right?

 

yes correct rxz is 1 pot and aprilia is 2 port

[faris]

there is no perfect setting bro. it depends on what you want it for.

[Suhaimss]

what's the reccomended setting?

there is no perfect setting bro. it depends on what you want it for.

[faris]

spocket 40 rear front 16 main jet 220 pilot jet stock needle clip position in the centre. boyesen reed petals ($40)

[Suhaimss]

boyesen reed petals, whats that?

spocket 40 rear front 16 main jet 220 pilot jet stock needle clip position in the centre. boyesen reed petals ($40)

[Geekster1403]

bros i need help. everytime i change gear i hear a metal sound like something metal hitting another metal part. anybody have any idea? :/

[LoudnessFz]

bros i need help. everytime i change gear i hear a metal sound like something metal hitting another metal part. anybody have any idea? :/

 

uh..got check chain lose onot? :S

[Geekster1403]

uh..got check chain lose onot? :S

 

not chain uh bro. i know when my chain hit my swingarm the sound is nt so loud.

[LoudnessFz]

talk about brake cal..anybody use 4 pot cal before?thought of changing my 3 pot standard cal(125z) to a 4 pot...i feel that my bike dont have enough stopping power sia..

 

i wanna know how much braking power does a 4 pot have..

[LoudnessFz]

not chain uh bro. i know when my chain hit my swingarm the sound is nt so loud.

 

if its loud then it should be external..if its external then it should be somewhere around your gear lever and front sprocket..try to narrow down the areas..and get a fren to ride beside u or test at carpark while ur fren see u riding..see if the thing is visible..

[Geekster1403]

if its loud then it should be external..if its external then it should be somewhere around your gear lever and front sprocket..try to narrow down the areas..and get a fren to ride beside u or test at carpark while ur fren see u riding..see if the thing is visible..

 

orite bro will try soon. thanks for the advice..