[Group] YAMAHA RXZ

[SparkerS1]

guys, wanna ask, if i downgrade & use a lower quality 2T oil, does it harm the piston or not? For now I'm using Esso 2t Gold.. If I downgrade & use other lower 2t like 2T Low smoke or other cheap 2t oil, is it advisable??

 

got 2T can liao, use which type of 2T doesnt matters, last time i use semi-syn 2T for my rxz, nothing wrong what, what the piston needs is 2T!!!! use any type will do, use the cheapest one also can

[static369]

which well known shop is that?

$25 for the pin? but seems abit ex lah but still ok if workmanship gd, u buy cheap n they anyhow fix also the same mah:cool:

 

a well know shop in enous bro.... i not if the problem is because of the new pin or the mechanic did not fix some thing in properly and it came out and now some where inside the engine or what.... i don't know....

 

any riders encounter this kind of problem before?

all help and info is very much appreciated....

[wehrmacht]

a well know shop in enous bro.... i not if the problem is because of the new pin or the mechanic did not fix some thing in properly and it came out and now some where inside the engine or what.... i don't know....

 

any riders encounter this kind of problem before?

all help and info is very much appreciated....

 

 

isit rs shop? the mech name is rosli?

[static369]

isit rs shop? the mech name is rosli?

er no bro... all chinese mech....

[sICkbOi-dOt-cOm]

anyone changed clutch plates? how much is 1 set?? was quoted $85... sounds ex to me.. my rxz is in the saddest condition...

[Mr wHo]

clutch plates aT 85? ........ DOESNT SEEMS RIGHT THOUGH THE PRICE BRO.......

 

Go to yishun industrial park there this shop behind soon hin or soon hin it self ask them how much they quote...

sud be lesser.....

[MaverickRD]

isit rs shop? the mech name is rosli?

 

Hmmm...

Mech name Rosli...

Sounds familar....

 

Do u usually go to his workshop?

How's his service and pricing??

 

Thanks for sharing bro...

:thumb:

[MaverickRD]

er no bro... all chinese mech....

 

Hey bro...

 

U always go to UM to do your bikes??

Or is it a different shop???

 

Maybe u could share ur experience there...

Good, Bad or Ugly????

:cheeky:

[apekyano]

halu fellow rxz lovers...

just wanna ask a ques...

i was told by my mech that my boost got prob..

wats a boost actually?

[Pendek]

oh ok..thanks..btw ur bike standard??!!

 

your most welcome bro.. yalah my bike been standard wat.. only u all only say not

 

yah planning to go for original japan set and use back my standard japan pipe.. dont wanna play catalyzer already.. nolah not wancheng... just original look..

 

bro send my regards to rangers there.. gosh i miss workin with them and the surroundings there.. take care bro.. i see u on 27 ok..

[Pendek]

then i dono how to fix myself...

 

u dont know how to fix?? never mind i can fix for u.. no need consultation money also.. im my own mechanic.. if i dont know then i ask mech.. so tat way we together save lots of money.. not everythin we refer to mech right?? some we can do and of course some we cant.. cheers bro!!

[Pendek]

My Rxz went for top overhaul but i cant get power when i need it. When i drag my throttle the engine become very noisy yet no power. Any experience guys ot here know my bike's problem?

 

does your overhaul have new piston and rings on it?? if it does, then u need to run in first.. cannot whack it straight up..

 

if not then could be your sprocket settings are still standard..

 

or got chance your crankshaft holding your con rod is loose due to wear and tear..

 

gd luck bro.. hope this helps.. get it checked up again or u can arrange to meet me..

[Pendek]

allo bro zeckers! i wana know if i m still able to purchase brand new y1 or y2 block in s'pore? if there are any shops selling, kindly post the add and the cost of it..ty in advance!

 

sorry bro,what i know those y1 and y2 have no more production.. but japan still make blocks.. u can buy e y4.. there is 2 production one is originally thai

and the other is japan made.. but its a lil more ex.. thai ones is 300+ the japan y4 is quote 400+ by my agent.. all these are first hand genuine 55k parts.. my uncle usin the japan y4, so far so good..

[Pendek]

Hello all z bangbros..haha.. anyway just wanna ask what sprocket size is suitable if i'm going for pick up? And how much will it cost to change?

 

ok pick ups are normally big sprockets.. but your rims play a big part too..

your running in 17inch or the 18inch??

[Pendek]

You can go all the way to Size 46. Recommended size is 40-42.

 

Take note that, better pickup will also cause your speed in 5th and 6th to be low and the engine will make a lot of noise.

 

Eg: With a size 36 sprocket, 90km/h = ~7000 RPM:)

With a size 42 sprocket, 90km/h = ~8500 RPM:giddy:

 

Big sprocket is not recommended for Long Distance travel.

Small sprocket is not recommended for Heavy riders, or riders which always carry pillion.

 

Price for rear sprocket is around $20. Depends on what type. This price is average, may be higher or lower.

 

bro your talkin for wat rim size??

17 or 18 inch??

wat bout the front sprocket??

remain or change??

 

or u need to ask your mech again??

 

just an argument for discussion tats all bro.. cos u keep besar besarkan your mech..

we are all in here to share aspects of hands on diy and exprience, not let pple always throw money at mech.. cos singapore mechs are not cheap, unless we cant solve the probs then last resort them, u know..

 

sorry for being direct.. hope u get wat i mean.. no hard feelings yah..

[Pendek]

anyone changed clutch plates? how much is 1 set?? was quoted $85... sounds ex to me.. my rxz is in the saddest condition...

 

hmmm so ex ah 85?? well my agent quote me $21 for 6piece just the clutch plates excluding the metal spacer.. the spacer will be$5.50 each..

our bike requires 5 or the metal spacer..

 

all the price are does not include installation as they are just authorised stockist in genuine parts and acessories..

direct, so its cheaper, included if u can fix yourself lah..

[toofaz]

bro your talkin for wat rim size??

17 or 18 inch??

wat bout the front sprocket??

remain or change??

 

or u need to ask your mech again??

 

just an argument for discussion tats all bro.. cos u keep besar besarkan your mech..

we are all in here to share aspects of hands on diy and exprience, not let pple always throw money at mech.. cos singapore mechs are not cheap, unless we cant solve the probs then last resort them, u know..

 

sorry for being direct.. hope u get wat i mean.. no hard feelings yah..

 

baek uh lu suda hentam sama dia...haha...how u bro?fix hel yet?

[Pendek]

halu fellow rxz lovers...

just wanna ask a ques...

i was told by my mech that my boost got prob..

wats a boost actually?

 

hmmm as for our bikes having small cc does not require or have a booster.. but i seen pple doing mods adding booster to it.. its gives u the extra firing for betters combustion.

 

i think roughly i get wat your mech means, i think he is refering to your body coil unit..

 

its attached in your front sub frame, the one set thats has the plug head.. run your fingers up from the plug head, then wire after the wire u can feel the main unit..

[Pendek]

baek uh lu suda hentam sama dia...haha...how u bro?fix hel yet?

 

aik bro!! u also know ah.. im good.. how is u man?? wheres your buddy bloody baguz?? suddenly gone..

[A-AN 07]

bro your talkin for wat rim size??

17 or 18 inch??

wat bout the front sprocket??

remain or change??

 

or u need to ask your mech again??

 

just an argument for discussion tats all bro.. cos u keep besar besarkan your mech..

we are all in here to share aspects of hands on diy and exprience, not let pple always throw money at mech.. cos singapore mechs are not cheap, unless we cant solve the probs then last resort them, u know..

 

sorry for being direct.. hope u get wat i mean.. no hard feelings yah..

 

True, true... I strongly agreed with you. Who don't want to save money right??? Everytime rely on mech also bengkok (bent) you know... We have to try it first then if still cannot of course lah have to proceed to your respective mech.

[bobplay]

ok pick ups are normally big sprockets.. but your rims play a big part too..

your running in 17inch or the 18inch??

 

now mine is 18"..planning to change to 17"..can? haha..

[SparkerS1]

now mine is 18"..planning to change to 17"..can? haha..

 

18" spoke rims are gd to me

[bobplay]

18" spoke rims are gd to me

 

wanna go for pickup and corner ah bro so planning to change to 17"..

[syamitomo]

18" spoke rims are gd to me

 

Yeah I agree too since 18" can cover more distance than 17" does. And who says tat 18" cannot corner as well as 17". It all depends on the rider! Don't believe, see how Pendek corner wif his 18" wrapped wif 80/80 Duro... Haha...

[SparkerS1]

wanna go for pickup and corner ah bro so planning to change to 17"..

 

ic ic, okie