CBR150R Riders, Join us now!

[krocozkid]

haiiizz my rad leaking quite bad. called radiator workshop located somwhere near sin ming lta, they ask me come down see the prob. once i come down, greeted by 2 chinese worker, i say wan repair bike rad, they laugh at me. zzzz.in the end, the boss came and say cannot repair. how ahhhhhh???

[xXxRatedxXx]

haiiizz my rad leaking quite bad. called radiator workshop located somwhere near sin ming lta, they ask me come down see the prob. once i come down, greeted by 2 chinese worker, i say wan repair bike rad, they laugh at me. zzzz.in the end, the boss came and say cannot repair. how ahhhhhh???

 

Change radiator lor.

[xbfish]

Hello everybody... haha..

[krocozkid]

Change radiator lor.

trying to work out cheaper solution. change rad is quite ex. unless got 2ndhand in perfect condition. haha

[xbfish]

trying to work out cheaper solution. change rad is quite ex. unless got 2ndhand in perfect condition. haha

 

You can weld your radiator if there is hole..

[krocozkid]

You can weld your radiator if there is hole..

 

any specific workshop to reccomdendd?? izit complicated to tk out the rad if DIY? thxx =D

[quadro]

Thanks for your info.

 

After some further diagnosis, the pike hose has burst and is detached, just picture cutting a rubber water hose into two and that is it.

Any place to suggest for wielding to join back the part? $200 is too much for a new one, and doubt the pipe can dismount from the connected hose...

 

Can one la... i dono about the price but i think $200 is abit too much.

 

Why not you try:

 

AC motor

 

50 Serangoon North Ave 4, #01-28, Singapore, Singapore 55585

Tel: 90220203

[xXxRatedxXx]

Thanks for your info.

 

After some further diagnosis, the pike hose has burst and is detached, just picture cutting a rubber water hose into two and that is it.

Any place to suggest for wielding to join back the part? $200 is too much for a new one, and doubt the pipe can dismount from the connected hose...

 

don't understand what you said.

[quadro]

got some wielding to join back the part. cost 35 bucks though.

 

However, after 'repair', my bike felt difficult to push forth and backward when parking, as if mild brake is being applied at all times.

Appreciate if can get some advice on this.

[xbfish]

got some wielding to join back the part. cost 35 bucks though.

 

However, after 'repair', my bike felt difficult to push forth and backward when parking, as if mild brake is being applied at all times.

Appreciate if can get some advice on this.

 

my sp used to have this problem of pushing forth and backward. It turns out to be wheel bearing problem.

 

You can try checking if the brake pad is touching the disc. After that, check for the wheel bearing.

[wenn]

Hi everyone,

 

Proud owner of this babe...just got it days ago...

 

http://i.imgur.com/73V8F.jpg

http://i.imgur.com/pPUKA.jpg

http://i.imgur.com/s8K35.jpg

 

Anyone with this new ride too?

Edited December 9, 2011 by wenn

[xbfish]

welcome welcome lol

[xXxRatedxXx]

Hi everyone,

 

Proud owner of this babe...just got it days ago...

 

http://i.imgur.com/73V8F.jpg

http://i.imgur.com/pPUKA.jpg

http://i.imgur.com/s8K35.jpg

 

Anyone with this new ride too?

 

http://troll.me/images/brows/browsin-the-posts-and-saw-yours-i-approve.jpg

[xXxRatedxXx]

Hi everyone,

 

Proud owner of this babe...just got it days ago...

 

http://i.imgur.com/73V8F.jpg

http://i.imgur.com/pPUKA.jpg

http://i.imgur.com/s8K35.jpg

 

Anyone with this new ride too?

 

http://troll.me/images/brows/browsin-the-posts-and-saw-yours-i-approve.jpg

[krocozkid]

Hi everyone,

 

Proud owner of this babe...just got it days ago...

 

http://i.imgur.com/73V8F.jpg

http://i.imgur.com/pPUKA.jpg

http://i.imgur.com/s8K35.jpg

 

Anyone with this new ride too?

 

its so nice to have a clock on the dashboard. too bad our old version does not have it.

anyway nice ride =)

[krocozkid]

anway, any old cbr 150 user changed horn to twin snail horn??i couldnt find any place to mount it nicely. any ideas??thankss

[d0n]

got some wielding to join back the part. cost 35 bucks though.

 

However, after 'repair', my bike felt difficult to push forth and backward when parking, as if mild brake is being applied at all times.

Appreciate if can get some advice on this.

 

pls share where u managed to get the welding/patching done~

it seems like the extractor (the black color portion of the exhaust pipe that runs from underneath engine to passenger footrest area) keeps getting rusty.

i bought an exhaust wrap to wrap up the portion to make it look more decent. but i know that his probably doesn't reduce the fact that it will still get rusty underneath.

maybe one day my extractor will break into 2 also

 

Hi everyone,

 

Proud owner of this babe...just got it days ago...

 

http://i.imgur.com/73V8F.jpg

http://i.imgur.com/pPUKA.jpg

http://i.imgur.com/s8K35.jpg

 

Anyone with this new ride too?

 

nice~

[d0n]

anway, any old cbr 150 user changed horn to twin snail horn??i couldnt find any place to mount it nicely. any ideas??thankss

 

i mounted the twin horns using 2 of the existing bolts found on the radiator water pump.

this is located on right hand side of the bike at the portion that is not covered by the fairing.

 

its so nice to have a clock on the dashboard. too bad our old version does not have it.

anyway nice ride =)

 

spend $3 to get an analogue watch from those lelong watch stalls and using double foam tape to tape it onto the dashboard/meter assembly.

there u have it.

u can get to choose yr preferred color and design

but no night illumination effect though.

 

try to avoid those which are super huge or digital kind.

too big and it blocks off the view of the meters.

digital ones tend to fade off under the strong sunlight.

[krocozkid]

i mounted the twin horns using 2 of the existing bolts found on the radiator water pump.

this is located on right hand side of the bike at the portion that is not covered by the fairing.

 

 

 

spend $3 to get an analogue watch from those lelong watch stalls and using double foam tape to tape it onto the dashboard/meter assembly.

there u have it.

u can get to choose yr preferred color and design

but no night illumination effect though.

 

try to avoid those which are super huge or digital kind.

too big and it blocks off the view of the meters.

digital ones tend to fade off under the strong sunlight.

 

aiihh, i juz sold the horn a few days back. haha!! yeeps, was thinking of getting > http://www.ebay.co.uk/itm/12V-Red-LED-Digital-Electric-Clock-Car-Motorcycle-/260824537860?pt=UK_Motorcycle_Parts&hash=item3cba5a9b04

btw do u knw if LAB gt sell those helmet lock?which is actually attached at back to lock the helmet??

[krocozkid]

i mounted the twin horns using 2 of the existing bolts found on the radiator water pump.

this is located on right hand side of the bike at the portion that is not covered by the fairing.

 

 

 

spend $3 to get an analogue watch from those lelong watch stalls and using double foam tape to tape it onto the dashboard/meter assembly.

there u have it.

u can get to choose yr preferred color and design

but no night illumination effect though.

 

try to avoid those which are super huge or digital kind.

too big and it blocks off the view of the meters.

digital ones tend to fade off under the strong sunlight.

 

aiihh, i juz sold the horn a few days back. haha!! yeeps, was thinking of getting > http://www.ebay.co.uk/itm/12V-Red-LED-Digital-Electric-Clock-Car-Motorcycle-/260824537860?pt=UK_Motorcycle_Parts&hash=item3cba5a9b04 or mayb LAB has them??

btw do u knw if LAB gt sell those helmet lock?which is actually attached at back to lock the helmet??

[xbfish]

Wah.. i saw kenneth old yellow cbr150 @ amk shop.. so tempting to buy.. lol ..

[x3mtoxic]

Nice ride. I'm getting mine this Sat

 

Hi everyone,

 

Proud owner of this babe...just got it days ago...

 

http://i.imgur.com/73V8F.jpg

http://i.imgur.com/pPUKA.jpg

http://i.imgur.com/s8K35.jpg

 

Anyone with this new ride too?

[xbfish]

Nice ride. I'm getting mine this Sat

 

nice... where do you stay? lol

[d0n]

aiihh, i juz sold the horn a few days back. haha!! yeeps, was thinking of getting > http://www.ebay.co.uk/itm/12V-Red-LED-Digital-Electric-Clock-Car-Motorcycle-/260824537860?pt=UK_Motorcycle_Parts&hash=item3cba5a9b04 or mayb LAB has them??

btw do u knw if LAB gt sell those helmet lock?which is actually attached at back to lock the helmet??

 

haha. whoops~

get a new pair lah. the basic version of stebel is probably around $10+ or $20.

if they can save u from idiotic drivers/riders, it is a good investment~

 

the digi clock looks great.

abit too lazy to pull the wirings though

 

helmet lock...? no idea. thought our bike have got helmet hook under the pillion seat already?

[x3mtoxic]

nice... where do you stay? lol

 

I stay Pasir Ris