CBR150R Riders, Join us now!

[kifakw]

was reading up this thread

 

http://www.singaporebikes.com/forums/showthread.php?t=86715&page=342

 

basically for stainless stain rewrap service is available @ sengkwang located at ang mo kio industrial park, $70 - $80 for a super4 end can

or

Guan Hoe Cheong @ 1110 serangoon road

 

if carbon fiber/matt black, bikewerkz @ bukit merah does provide that service but the bad news it that like what collectees said "the CF sticker will melt due to the heat and it looks like ...."

 

or $5 CF sticker @ lab heee heee

 

anyone interested in rewrapping of stainless steel? maybe can get discounts ^_^

[collectees]

basically for stainless stain rewrap service is available @ sengkwang located at ang mo kio industrial park, $70 - $80 for a super4 end can

or Guan Hoe Cheong @ 1110 serangoon road

 

er, a new end can costs slightly under $100. so why you would want to spend $80 to get it wrapped?

[whitefang]

wah.. why is the pricing so odd? like that, pple would rather get a new can for a bit more wat.. *scratch head*

[kifakw]

er, a new end can costs slightly under $100. so why you would want to spend $80 to get it wrapped?

 

huh? is it? :slapforehead:

 

i didn't know siol lol. all along i though that a new end can costs like around $150 - $200 like that.

 

slightly less than a $100, that sounds like a good bargain. May i ask where can i get it from? i don't want yours hor lol.

 

btw any information for Year04 Repsol fairings? Does fairings include like the side body plastics parts from the fuel tank to the rear light + the pillion's handle + the 1 piece of plastics on top of the rear light?

 

it's about $300 right?

[holugyi]

er, a new end can costs slightly under $100. so why you would want to spend $80 to get it wrapped?

 

where we can get new endcan? can do by self?

[collectees]

huh? is it? :slapforehead:

 

i didn't know siol lol. all along i though that a new end can costs like around $150 - $200 like that.

 

slightly less than a $100, that sounds like a good bargain. May i ask where can i get it from? i don't want yours hor lol.

 

btw any information for Year04 Repsol fairings? Does fairings include like the side body plastics parts from the fuel tank to the rear light + the pillion's handle + the 1 piece of plastics on top of the rear light?

 

it's about $300 right?

 

the exact price i know is $95, at Everfit. i might be able to get a better price, though.

 

btw, mine has a carbon-kevlar wrap. it's not for sale. =P

 

with regard to fairings, please note that the various colors of different years can be bought easily. it's the stickers are are very difficult to replace. these plastics range from $35-$45 EACH.

[collectees]

where we can get new endcan? can do by self?

 

drop me a PM and we'll go down to Everfit to make the purchase together.

 

replacing the endcan is as simple as removing 4 screws. if you're going to make the replacement, it is advisable to buy 4 stainless steel screws to use instead of the old rusty ones.

[kifakw]

where we can get new endcan? can do by self?

 

drop me a PM and we'll go down to Everfit to make the purchase together.

 

replacing the endcan is as simple as removing 4 screws. if you're going to make the replacement, it is advisable to buy 4 stainless steel screws to use instead of the old rusty ones.

 

When do you guys want to get the end can?

 

Count me in as well thanks

 

What will you be getting collectees?

[JetGrey]

the exact price i know is $95, at Everfit. i might be able to get a better price, though.

 

btw, mine has a carbon-kevlar wrap. it's not for sale. =P

 

with regard to fairings, please note that the various colors of different years can be bought easily. it's the stickers are are very difficult to replace. these plastics range from $35-$45 EACH.

 

I'm wondering whether the new '08 CBR125 fairings can fit on an '06 CBR150. The head cowl of the new one definitely looks a lot nicer than our current one.

[collectees]

I'm wondering whether the new '08 CBR125 fairings can fit on an '06 CBR150. The head cowl of the new one definitely looks a lot nicer than our current one.

 

the short answer is no.

 

if you have taken apart our head cowl, you will notice that the chassis requires mounting support via our mirrors. the CBR125 mirrors are mounted on the handle bars. the different in the mounting points will make securing the fairings difficult. if normal use vibrations can crack our properly mounted fairings, imagine what happens to an unsecured one?

 

i'm not saying that it's impossible; i have seen pictures of Toyota MR2s being modified to look like Gallardos. however, is it worth all that effort? the '06 CBR150 (in red) is the best looking year!

[collectees]

When do you guys want to get the end can?

 

Count me in as well thanks

 

What will you be getting collectees?

 

if we can get Holugyi to confirm his order, i could help with a MO. i think Uncle Lim is keen in replacing his too, so thats 3 in total. we can arrange for a DIY.

 

just curios, why would you want to change your endcan?

[holugyi]

arr .. no .. no .. I just asking about that, if when i need to change i need to know lor.. tks a lot..

 

but I need to change my sticker on rear part, under seat. deep scratch on tank also

[collectees]

arr .. no .. no .. I just asking about that, if when i need to change i need to know lor.. tks a lot..

 

but I need to change my sticker on rear part, under seat. deep scratch on tank also

 

sticker very difficult to get.

 

best to just use paint marker to touch up.

[whitefang]

drop me a PM and we'll go down to Everfit to make the purchase together.

 

replacing the endcan is as simple as removing 4 screws. if you're going to make the replacement, it is advisable to buy 4 stainless steel screws to use instead of the old rusty ones.

 

zed do u remember that time we went to JB to change EO and the uncle mechanic said that my exhaust pipe inside got something that is loose, hence the rattling when i throttle?

 

if i change the end can, can i get to that problem and get it fixed?

[collectees]

zed do u remember that time we went to JB to change EO and the uncle mechanic said that my exhaust pipe inside got something that is loose, hence the rattling when i throttle?

 

if i change the end can, can i get to that problem and get it fixed?

 

the answer is yes, as you will be replacing the entire endcan.

[whitefang]

the answer is yes, as you will be replacing the entire endcan.

 

ooo.. can consider.. see how the finances work out first.

[collectees]

ooo.. can consider.. see how the finances work out first.

 

as long as you stop visiting Motoworld with Derrick, sure can work out one.

[thisisme]

hey why me again seeing my name up all thanks to zed

 

haha dont see i dont post but i read one kk hahaaha

[thisisme]

haha 3 days time will go for 2A

[collectees]

hey why me again seeing my name up all thanks to zed

 

haha dont see i dont post but i read one kk hahaaha

 

you popular ma, what to do?

[collectees]

haha 3 days time will go for 2A

 

so looks like there is soon going to be a traitor and leave us soon, eh?

[d0n]

drop me a PM and we'll go down to Everfit to make the purchase together.

 

replacing the endcan is as simple as removing 4 screws. if you're going to make the replacement, it is advisable to buy 4 stainless steel screws to use instead of the old rusty ones.

 

i remember bro Shivaz got the end-can for smth like $80 at Unique (include installation).

maybe u all want to give them a call 1st to check?

 

according to advertisers board section,

Unique Motorsports (Defu Branch)

Blk 6 Defu Lane 10

#01-554

Singapore 539187

 

Tel: 6283 4878

Fax: 6283 2750

 

do note there is a possiblity that the 4screws get stuck due to the rust, etc.

mine are. strangely, this gives me the secured feeling that pple cant steal my end-can (unless they take the entire exhaust including the header).

 

so pls do check that the 4screws are not stuck before u proceed to DIY the end-can.

[whitefang]

eh no hor. very long never see derrick even.

 

haha..

 

actually i'm trying to save cos next mth i'm not working liao.. exams coming up.. so my expenses have to be watched..

 

plus the angel eye that i promised to get from rabbit also? argh!

 

if u guys can get a MO on it and get it cheaper, it'll be easier to convince me to part with my money. hahaha..

[d0n]

the short answer is no.

 

if you have taken apart our head cowl, you will notice that the chassis requires mounting support via our mirrors. the CBR125 mirrors are mounted on the handle bars. the different in the mounting points will make securing the fairings difficult. if normal use vibrations can crack our properly mounted fairings, imagine what happens to an unsecured one?

 

i'm not saying that it's impossible; i have seen pictures of Toyota MR2s being modified to look like Gallardos. however, is it worth all that effort? the '06 CBR150 (in red) is the best looking year!

 

my mirrors are mounted at handlebar too.

in place of the original mirror stems, are screws to hold the head fairing in place.

 

after taking a closer look at the cbr125 at:

http://www.ggmotorcycles.ca/index_files/07cbr125red.jpg

 

my main concern will be the mounting points for the front fairing.

cbr125 2008 front fairing is 1 entire piece front + side bottom.

different from our cbr150 front + side middle + side bottom.

 

from the cbr125 forum below, our headlight harness will need to be modified to fit H7 bulbs. further wiring mod to accomodate additional auxiliary light on top of the headlight is necessary if u want to.

 

http://www.cbr125r.ca/forum/showthread.php?t=278

 

i would reckon the below items need to be replaced:

- front fairing

- headlights & aux light (including bulb and wire harness)

- metal sub-frame (holding on to the headlight & front fairing)

- meter assembly (including the black color plastics at both the sides of the assembly)

- signal lights

- bubble screen

 

 

ben: u support capital i support labor & we try it out on yr ride?

[collectees]

i remember bro Shivaz got the end-can for smth like $80 at Unique (include installation).

maybe u all want to give them a call 1st to check?

 

according to advertisers board section,

Unique Motorsports (Defu Branch)

Blk 6 Defu Lane 10

#01-554

Singapore 539187

 

Tel: 6283 4878

Fax: 6283 2750

 

do note there is a possiblity that the 4screws get stuck due to the rust, etc.

mine are. strangely, this gives me the secured feeling that pple cant steal my end-can (unless they take the entire exhaust including the header).

 

so pls do check that the 4screws are not stuck before u proceed to DIY the end-can.

 

here's another alternative, as suggested by d0n.