Home of CBR600

[pingxue]

HAHA of course of course cant wait also... hee

[AlvZz]

Originally posted by hockie69@Jan 22 2006, 12:41 PM

i wonder how u know.......wahahahaha.

 

be careful while handling worr.

hehehe

cos i do drain out my petrol from my tank

hehehee

spare petrol for me

[AlvZz]

Originally posted by pingxue@Jan 22 2006, 04:54 PM

Hey guys... I'll be getting my bike around this week.

Any things to look out for???

:confused:

hm... new bike should not have any problem....

hm... which model u got???

[hockie69]

Originally posted by AlvZz@Jan 22 2006, 09:31 PM

hm... new bike should not have any problem....

hm... which model u got???

u must be smelling too muhc of the "green" petrol liao.....lolz

 

he mention in 1 of de post la.

 

RR5......color :black(i think).

[Guest Enjoy]

Guys, any of u get numbs on our RRs? Am using motovation bar end and i notice that my hands get numb easier during constant low rpm (below 5K) compared to relatively much higher rpm like 2nd link trips.

 

Y is this so? Isn't higher rpm = more vibration = numbed hands? Or issit because while in 2nd link the rpm varies that's y my hands dont feel numb compared to constant riding speed in sgp expressway?

 

I am not sure if i heard something like u can adjust balancers on vibration for different speed. If yes, how do i do it?

[hockie69]

Originally posted by pingxue@Jan 22 2006, 09:25 PM

HAHA of course of course cant wait also... hee

are your bike from boonsiew?

 

when i collect mine direct from boonsiew(i bought from there).

 

#1- day of collection - battery not charge. fwah ! day #1 nia like that liao.boonsiew sleeping agh ! had to reject collection & they take out the dry-cell battery to charge for 1hr b4 i can collect.

 

#2- windscreen plastic srew - 2 of them were overtighten till the tread rounded(had to replace outside myself) cos change windscreen then realise-haizz

 

#3- left side black plastic cover(under the seat that 1 ) 1 plastic clip not install(buy myself) cos want to change exhaust then realise it was not there at all-haizz

 

#4- make sure all your "oil"(engine,coolent,brake) are fill to the MAX (my rear brake fluid not full when collect)

 

*remember to collect your HONDA factory warranty cert ! (comes with 3 free svc-oil + labour)

[hockie69]

Originally posted by Enjoy^83@Jan 22 2006, 10:32 PM

I am not sure if i heard something like u can adjust balancers on vibration for different speed. If yes, how do i do it?

i notice that too.during the 1st 800km run-in period.

 

it seens like the end bar vibrate more ard 4.5k~5.5k rpm(ard 100km/hr beh).

 

i assume the motovation end bar weight will counter the freg of the end bar by adjusting the gap between the weight & bar-end.

 

*i dunno...cos still waiting for the bar end weight to come in.

[pingxue]

Originally posted by hockie69@Jan 22 2006, 10:38 PM

are your bike from boonsiew?

 

when i collect mine direct from boonsiew(i bought from there).

 

#1- day of collection - battery not charge. fwah ! day #1 nia like that liao.boonsiew sleeping agh ! had to reject collection & they take out the dry-cell battery to charge for 1hr b4 i can collect.

 

#2- windscreen plastic srew - 2 of them were overtighten till the tread rounded(had to replace outside myself) cos change windscreen then realise-haizz

 

#3- left side black plastic cover(under the seat that 1 ) 1 plastic clip not install(buy myself) cos want to change exhaust then realise it was not there at all-haizz

 

#4- make sure all your "oil"(engine,coolent,brake) are fill to the MAX (my rear brake fluid not full when collect)

 

*remember to collect your HONDA factory warranty cert ! (comes with 3 free svc-oil + labour)

nope not from boon siew.. Phew... hoped mine will be okie.

i'll keep that in mind. thanks!!

[sportb1ke]

Originally posted by Enjoy^83@Jan 22 2006, 10:32 PM

Guys, any of u get numbs on our RRs? Am using motovation bar end and i notice that my hands get numb easier during constant low rpm (below 5K) compared to relatively much higher rpm like 2nd link trips.

 

Y is this so? Isn't higher rpm = more vibration = numbed hands? Or issit because while in 2nd link the rpm varies that's y my hands dont feel numb compared to constant riding speed in sgp expressway?

 

I am not sure if i heard something like u can adjust balancers on vibration for different speed. If yes, how do i do it?

im the other way round...right hand gets very numb at high rpm...

 

u can tighten the balancer all the way in or leave a gap in between the balancer and the handle bar...

this act will shift the resonance frequency.. (theoretically)

 

currently i leave a 5mm gap in between...maybe i should try to adjust again and see if it make any difference

 

u can only do it in a trial and error basis...choose a setting that suit u best.

 

but dont leave the gap too far apart or else ur balancers may fly off halfway...

[Guest Enjoy]

Originally posted by sportb1ke@Jan 22 2006, 10:54 PM

im the other way round...right hand gets very numb at high rpm...

 

u can tighten the balancer all the way in or leave a gap in between the balancer and the handle bar...

this act will shift the resonance frequency.. (theoretically)

 

currently i leave a 5mm gap in between...maybe i should try to adjust again and see if it make any difference

 

u can only do it in a trial and error basis...choose a setting that suit u best.

 

but dont leave the gap too far apart or else ur balancers may fly off halfway...

I see.....will try it out someday. i tried riding at 70km/hr, 6th gear, very low rpm (probably 3k?) for sometime and my hands get numbed. Quite irritated by that.

 

Thanks!

[mechwira]

Originally posted by Enjoy^83@Jan 22 2006, 10:32 PM

Guys, any of u get numbs on our RRs? Am using motovation bar end and i notice that my hands get numb easier during constant low rpm (below 5K) compared to relatively much higher rpm like 2nd link trips.

 

Y is this so? Isn't higher rpm = more vibration = numbed hands? Or issit because while in 2nd link the rpm varies that's y my hands dont feel numb compared to constant riding speed in sgp expressway?

 

I am not sure if i heard something like u can adjust balancers on vibration for different speed. If yes, how do i do it?

higher rpm does not necessarily mean higher vibration.

 

there is a particular point where ur vibration is highest. when u hit this point and ur increase rpm, the vibration actually decrease. where this point is is largely dependant on the weight on your bar end.

 

when u put the motovation bar ends, actually what u did was to shift this point elsewhere. chances are, it is moved further away, but no guarantee. motovation probably did their calculations to ensure that the weight does shift further away such that the rider feels more comfortable.

 

ur solution therefore is to either cruise at a higher rpm or change some other bar end of a different weight.

[Guest Enjoy]

Originally posted by mechwira@Jan 22 2006, 11:27 PM

higher rpm does not necessarily mean higher vibration.

 

there is a particular point where ur vibration is highest. when u hit this point and ur increase rpm, the vibration actually decrease. where this point is is largely dependant on the weight on your bar end.

 

when u put the motovation bar ends, actually what u did was to shift this point elsewhere. chances are, it is moved further away, but no guarantee. motovation probably did their calculations to ensure that the weight does shift further away such that the rider feels more comfortable.

 

ur solution therefore is to either cruise at a higher rpm or change some other bar end of a different weight.

Hmm, got it....thanks

 

Still got 3rd option, live with it. haha!

[hockie69]

Originally posted by pingxue@Jan 22 2006, 10:54 PM

nope not from boon siew.. Phew... hoped mine will be okie.

i'll keep that in mind. thanks!!

u mean ur bike is P.I HONDA?

 

or from Boon siew Honda but buy from other bike shop?

 

if ur bike is from boonsiew then...same same la....the bike will be de-box & setup by Boonsiew HONDa PDI......(so same hand that rounded my screw could be working on yours too)

 

if not wrong...ur bike shop also get from boonsiew unless stated as a JDM spec lor.

 

which there will be a 180km/hr speed cut.

[hockie69]

Originally posted by Enjoy^83@Jan 22 2006, 11:41 PM

Hmm, got it....thanks

 

Still got 3rd option, live with it. haha!

still got 4nd option !

 

#4 - "u want to sell...u go & sell la"..................

[BuZZBeaM]

Originally posted by Enjoy^83@Jan 22 2006, 11:08 PM

I see.....will try it out someday. i tried riding at 70km/hr, 6th gear, very low rpm (probably 3k?) for sometime and my hands get numbed. Quite irritated by that.

 

Thanks!

eh under utilise !!!!

do 70km/h at 5th gear at least hehe

its chokin at 6th gear man....

[kori]

27th jan i think some of the f4i guys are going down track in the morning.. wanna join? i'll be joining them but sitting around and watching them play as my gear not ready yet.

[hockie69]

2 day b4 CNY?....eerrrrr....i pass....lolz

 

will be busy with spring clean....buy food...perpare dinner staff....etc

 

*enjoy the track day & be safe.yeah

 

saw at loois today...a K5 1000 "kiss" the road on track.....CNY coming liao..no transport....very hard to take taxi 1.

[Guest Enjoy]

Originally posted by hockie69@Jan 23 2006, 12:10 AM

still got 4nd option !

 

#4 - "u want to sell...u go & sell la"..................

Cannot lar, must get ur approval and pay u for using that phrase.

 

 

[Guest Enjoy]

Originally posted by BuZZBeaM@Jan 23 2006, 01:13 AM

eh under utilise !!!!

do 70km/h at 5th gear at least hehe

its chokin at 6th gear man....

Haha, yeah....but i am just trying out how much mileage it can hit with that kinda rpm.

[AlvZz]

hm....

how u guys feel abt the fp60 ar??

i think i today then like got a better feel of the engine

[sportb1ke]

Originally posted by kori@Jan 23 2006, 04:07 PM

27th jan i think some of the f4i guys are going down track in the morning.. wanna join? i'll be joining them but sitting around and watching them play as my gear not ready yet.

very tempted but not free on 27th either... looking forward a session after cny!

[Guest Enjoy]

Originally posted by AlvZz@Jan 23 2006, 08:56 PM

hm....

how u guys feel abt the fp60 ar??

i think i today then like got a better feel of the engine

thumbs up!

 

Got more respond from my engine this morning, rode to camp with smiles. My tank is about half left, hopefully its not the placebo effect.

[Guest Enjoy]

Originally posted by sportb1ke@Jan 23 2006, 09:17 PM

very tempted but not free on 27th either... looking forward a session after cny!

Yeah, after CNY!

[hockie69]

Originally posted by Enjoy^83@Jan 23 2006, 08:27 PM

Cannot lar, must get ur approval and pay u for using that phrase.

 

 

aiyo..i very easy going 1....just 1 kopi can liao.

[hockie69]

Originally posted by AlvZz@Jan 23 2006, 08:56 PM

hm....

how u guys feel abt the fp60 ar??

i think i today then like got a better feel of the engine

thats be-cos...u only start using THE tank today !.....lolz:faint:

 

*overall.....once this trial tank is over...it would fall back to the usual "Self".

 

from there...u judge urself..where this S$1.25/topup tankful is worth it anot lor.

 

of cos...by lowering the RON petrol by 1 grade...u actualy save money.