[Discussion] CB400 SUPER FOUR HYPER VTEC Revo

[nando]

anyone knows how much & where can i get the rubber stopper for my side panels? i lost the lower part one. thks dudes!

[ResmeN]

bro where to get the handle bar? and how much?

I bought it from the local importer in Australia but if I hadn't found it locally I was going to buy it from Riders Discount online and below are all the contact and pricing details including shipping you asked for.

-----

support@ridersdiscount.com

We do have the 41mm's available as well:

 

GILLES GP LIGHT CLIP-ON HANDLEBARS 41MM HON SUZ YAM - TR-635293 - $137.05

Shipping - $25.00

Total - $162.05

 

Regards,

 

John

Riders Discount, Inc

http://www.ridersdiscount.com/

http://stores.ebay.com/RIDERS-DISCOUNT

-----

[SparkerS1]

Just fixed the Motivation heavy type bar end slider from Unique motor.

 

Can feel a big diff in the handling of the bike, more stable and alot less vibration from the handle bar wheen riding.

 

It's money well spent for a more comfortable riding experience

[Markopolo]

Just fixed the Motivation heavy type bar end slider from Unique motor.

 

Can feel a big diff in the handling of the bike, more stable and alot less vibration from the handle bar wheen riding.

 

It's money well spent for a more comfortable riding experience

How much does it cost? lols

[SparkerS1]

Cost $65 and they install it for u.

[azman ibrahim]

hey guys, i recently install a voltmeter and change a new battery. my volt was going at 14 v, but after today heavy downpour it drop to 13 v, is this normal?

[MSDS]

14v means that it is charging... maybe when u saw it as 13v while it is on standby...

Once u turn on the keys and it show below 10 point something then u should worry... becos it might not be able to crank start the bike...

but after start, it should charge by itself... for those ppl that need to stop the bike very frequently then their bike batt is gonna hurt...

only while cranking start draw huge current from the batt... so if u ride for very short distance and crank start every few minutes be sure u have a good batt... and I believe in 1 thing... if the batt drain to a very low point, then no matter how u charge it is not gonna be the same again...

[azman ibrahim]

14v means that it is charging... maybe when u saw it as 13v while it is on standby...

Once u turn on the keys and it show below 10 point something then u should worry... becos it might not be able to crank start the bike...

but after start, it should charge by itself... for those ppl that need to stop the bike very frequently then their bike batt is gonna hurt...

only while cranking start draw huge current from the batt... so if u ride for very short distance and crank start every few minutes be sure u have a good batt... and I believe in 1 thing... if the batt drain to a very low point, then no matter how u charge it is not gonna be the same again...

 

hey bro, the 13 v right, it was during at the traffic light and riding on the expressway, the max it went was 13.2 on the expressway. and cant seem to go to 14v. should i be concern? because after a heavy downpour yest suddenly drop and cant seem to go to 13.5 v, let alone 14v.

[Fazli]

Yes you should. Could be your rectifier, alternator or coil... Give it a check.

[azman ibrahim]

Yes you should. Could be your rectifier, alternator or coil... Give it a check.

 

sure bro, thanks yah. will give it a check if im free.

[XiAO_ViNtaGe87]

HEy guys..i realise after i ride my bike i will have this very strong well of petrol on my shirt and hand..do u guys encounter that too???

[SparkerS1]

nope, i nv encountered it before.

 

Is there a leak somewhere else? Wash ur bike liao and see if the problem still have

[pyro13]

HEy guys..i realise after i ride my bike i will have this very strong well of petrol on my shirt and hand..do u guys encounter that too???

 

Is it after only a ride?? Maybe u should give it a good wash and see how. Could be petrol already stuck to ur handgrip.

[XiAO_ViNtaGe87]

Yea ..i always smelly like a petrol man..zzz..haha...okie..thanks guys!!!!=)

[WwEEeeEE]

hey guys, is it normal to hear a 'hissss' sound when i'm starting the bike and turn the keyhole from off --> on (haven press start yet)?

[yc86]

hey guys, is it normal to hear a 'hissss' sound when i'm starting the bike and turn the keyhole from off --> on (haven press start yet)?

 

Sounds like the fuel pump running. Shd be the same as FI cars. The fuel pump will run for like 1 or 2 sec to prime the system for starting.

[ResmeN]

Cost $65 and they install it for u.

That's a good price. Could you post a link to the ones you got on the us motivation website. I looked in to the universal motivation bar ends but are more than double that amount.

HEy guys..i realise after i ride my bike i will have this very strong well of petrol on my shirt and hand..do u guys encounter that too???

Why does this remind me of that recent peanut smell posts I've been reading

hey guys, is it normal to hear a 'hissss' sound when i'm starting the bike and turn the keyhole from off --> on (haven press start yet)?

Agree with what bro yc86 said.

[sKull88]

Hi guys.. Jus wan to ask.. I jus bought a lv slip-on.. I need to go inspection for my pipe right?

$78? Then after that they will give me a cert? Then I go take out the silencer right? That's what mostly ppl do..

[pyro13]

Hi guys.. Jus wan to ask.. I jus bought a lv slip-on.. I need to go inspection for my pipe right?

$78? Then after that they will give me a cert? Then I go take out the silencer right? That's what mostly ppl do..

 

Whoa whoa.. Let me stop u right ter.

 

Its 78 bux and they will endorse ur lv cert wit ur bike number. However, if u remove silencer, it is deemed an illegal pipe.

[sKull88]

Ya.. I mean will they give u a cert to Prove that it has been endose..

That's what all the ppl do ma, remove silencer replace a cap..

[SparkerS1]

That's a good price. Could you post a link to the ones you got on the us motivation website. I looked in to the universal motivation bar ends but are more than double that amount..

 

ermm i post the UNique motor link instead

 

http://www.singaporebikes.com/forums/showthread.php/186489-Motovation-Engineered-Parts-Motovation-Sliders-amp-Heavy-Balancers-with-Barend-Sliders

[ResmeN]

ermm i post the UNique motor link instead

 

http://www.singaporebikes.com/forums/showthread.php/186489-Motovation-Engineered-Parts-Motovation-Sliders-amp-Heavy-Balancers-with-Barend-Sliders

Yes meant Unique motor but motovation bar end, thanks for that

[khoa9876]

this is some racing parts for Revo that I had updated into my bike, very quick response and power

http://farm6.static.flickr.com/5186/5657473013_bae484b576_z.jpg

come with a kit

http://farm6.static.flickr.com/5105/5658048566_801198ca4c_z.jpg

with Arrow mirror CRG USA

http://farm6.static.flickr.com/5264/5657474255_542bccbdd5_z.jpg

brembo GP lever

http://farm6.static.flickr.com/5066/5649758068_ff7f4cdc6e_z.jpg

mybike after testing on highway

http://farm6.static.flickr.com/5183/5636392839_5ccb21424d_z.jpg

this is CNC racing funnel, beside is original funnel, racing funnels are shorter and bigger diameter

[Fazli]

Nice... Where you get most of your parts from?

[khoa9876]

most parts from Japan, some from USA, and some from Europe. You can order them from Alvin Motovation

Actually, clipon handle bar of Hurricane is No 1, then CF-Posh is No 2. Very nice and safe

http://farm6.static.flickr.com/5261/5594988536_e14a10d4b9_z.jpg

CRG supersport clutch set, you can change into Brembo but I think CRG is very good for handling and control

http://farm6.static.flickr.com/5175/5594402483_b765002c87_z.jpg

http://farm6.static.flickr.com/5021/5594402379_48fb08732d_z.jpg

http://farm6.static.flickr.com/5100/5594988046_5c0e4d7e0c.jpg

http://farm6.static.flickr.com/5149/5594987918_d5006a4a8b_z.jpg

http://farm6.static.flickr.com/5267/5594402117_516923aea9_z.jpg