Bajaj Pulsar Lovers 2007

[Roadrunner71]

Makan After 3rd Bajaj Pulsar DIY Session

Sat 21 Jul, Jln Kayu

 

1. Paiseh

2. Lindavw

3. Roadrunner71

4. Gorjes

[paiseh]

Makan After 3rd Bajaj Pulsar DIY Session

Sat 21 Jul, Jln Kayu

 

1. Paiseh

2. Lindavw

3. Roadrunner71

4. Gorjes

 

nono, i will not go makan dinner. i will go family dinner. den maybe join u guys for s**per

[Roadrunner71]

nono, i will not go makan dinner. i will go family dinner. den maybe join u guys for s**per

Ur family dinner from wat time till wat time? By the time u go to Jln Kayu, the others will still be there meh? If like that, then those who go to Jln Kayu for dinner after the DIY session will stay there throughout dinner followed by s**per

[Roadrunner71]

The 4 screws attaching my IU to its bracket are rusty liao. Where can get stainless steel ones ah? Went to DIY shop dun have leh. Wat abt neighbourhood hardware shop?

 

Paiseh, u think Autobacs in Bt Batok has?

[joajas]

The 4 screws attaching my IU to its bracket are rusty liao. Where can get stainless steel ones ah? Went to DIY shop dun have leh. Wat abt neighbourhood hardware shop?

 

Paiseh, u think Autobacs in Bt Batok has?

 

Bro why not try mustafa, on the level where you get the maxima eo, towards the RHS got a rack full of screws and nuts.

[Roadrunner71]

Bro why not try mustafa, on the level where you get the maxima eo, towards the RHS got a rack full of screws and nuts.

But r they stainless steel? The DIY shop that I went to also has rows of screws, but none are stainless steel ones.

[paiseh]

The 4 screws attaching my IU to its bracket are rusty liao. Where can get stainless steel ones ah? Went to DIY shop dun have leh. Wat abt neighbourhood hardware shop?

 

Paiseh, u think Autobacs in Bt Batok has?

 

i not too sure leh. mine also got rust. but a bit only

[joajas]

But r they stainless steel? The DIY shop that I went to also has rows of screws, but none are stainless steel ones.

 

It has a mixture of stainless and non stainless. But i not sure if they have the type you want. cause that i went the stainless steel ones are limited. you can also try homefix i know they have stainless steel screw but not sure of the type. is the one the IU using self tapping type? if yes then only size matters, if not the self tapping type then you have to know what kind of screw thread they using.

[Roadrunner71]

i not too sure leh. mine also got rust. but a bit only

Mine quite bad lah. Like 'rotting' liao. Afraid that with further use with the screwdriver, might damage the screw head then can't unscrew after that.

 

Nvm lah, if can't find stainless steel ones, then just use normal ones and just change more regularly.

[Roadrunner71]

It has a mixture of stainless and non stainless. But i not sure if they have the type you want. cause that i went the stainless steel ones are limited. you can also try homefix i know they have stainless steel screw but not sure of the type. is the one the IU using self tapping type? if yes then only size matters, if not the self tapping type then you have to know what kind of screw thread they using.

Not sure myself. Gonna unscrew after work later to check it out.

 

Anyway, thanks for the info. Will check out Mustafa & Homefix when I have the time. All this is bcos my IU is vibrating quite badly lah now. How abt u guys?

[S4RevoVtec]

yes, it vibrate alot, and once the IU unit dismentle itself. i use PC screw

[paiseh]

okie, outspoken's hazard lights are done. woot

[joajas]

I read thru ur stuff..

Mayb u should ground the relay oso to achieve the whole close circuit.

ya i agree that the box is zero resistant cos when current pass thru both speedo n signal will have lights its vice versa u see?

by side u r not wrong 1 relay can s**port 2 lights... y still cannot light **?

 

 

 

I think most likely it is caused by incorrect flasher (was given a 24v one) that was sold to me. I have change the flasher but no time to try again. Will wait till the diy session then see how.

 

If i were to totally isolate the light from the bike, i will need 2 relay per side(RHS and LHS).

 

Now I only have 2 piece of relay. I will risk isolating only the positive leg. If really cannot then will have to isolate everything.

[joajas]

My IU screws are still ok, but my right front signal light is loose. Think will get the mechs to tighten for me.

 

When got time maybe should get locktite on all screws. the loose light is causing lots of vibrations. Hope that the nut dun drop off before i go to the workshop.

[lindavw]

I think most likely it is caused by incorrect flasher (was given a 24v one) that was sold to me. I have change the flasher but no time to try again. Will wait till the diy session then see how.

 

If i were to totally isolate the light from the bike, i will need 2 relay per side(RHS and LHS).

 

Now I only have 2 piece of relay. I will risk isolating only the positive leg. If really cannot then will have to isolate everything.

 

U wan to trial n error later tonite again if u free?

i havent buy the stuff for DIY yet. in case anyone still interested in ur method they can still opt out.

[lindavw]

Not sure myself. Gonna unscrew after work later to check it out.

 

Anyway, thanks for the info. Will check out Mustafa & Homefix when I have the time. All this is bcos my IU is vibrating quite badly lah now. How abt u guys?

 

Go to behind ah boy there buy la.

unscrew 1 pc then give them as sample tell them u wan stainless steel ones.

mine i change most of my screws to stainless steel already.

actually i dun like the way my IU is mounted... so tot of changing but now quite lazy to do anything to my bike liaoz...

wait til i go n dig out my last time ERP holder then see how lor.

[joajas]

U wan to trial n error later tonite again if u free?

i havent buy the stuff for DIY yet. in case anyone still interested in ur method they can still opt out.

 

If any bros are still interested in the method 1, will hav to wait till next diy already, cause i really no time to try. The next earliest time is maybe sat afternoon, by then too late already.

 

So if any bros still interested, will organise another diy in the near future when i got the circuit working.

 

Sorry peeps.

[Roadrunner71]

3rd Bajaj Pulsar DIY Session

Sat 21 Jul

 

Meet at Jln Kayu carpark, 7 pm OR

Blk 413 multi-storey carpark (2nd-last level), Fernvale Link, 7.15 pm.

If raining, Blk 413 multi-storey carpark (2nd-last level), Fernvale Link, 7 pm.

 

Street directory - Jln Kayu Carpark

Street directory - Blk 413 Fernvale Link

 

Chief Mechanics

1. Paiseh (for Ver 2)

2. Lindavw (for UG3 Method 2)

 

For UG3 (Method 2) - Independent hazard light switch. Hazard lights can be turned on only when in 'ignition on' position ($20 tops; estimated)

1. spai_duhz

2. Blueyeagle

3. Noraachan

4. Adriel78

 

For ver2 - independent hazard light switch ($5)

1. lancified

2. Rubberduckie_sg

3. myword

 

Attending but not doing any mod

1. Roadrunner71

2. SuVespa

3. ray0006

4. dnotorious

5. GoofRider

6. Lanzer

7. Joajas

 

Tools needed (if u have)

1. Spanner, size 10mm, open-end or ring

2. Socket wrench or spanner-socket combo, size 10mm

3. Screwdriver, Phillips

[Roadrunner71]

Going To DIY Session Together

Sat 21 Jul

 

Meet at Esso station (exit side) next to BBDC. Moving off to Jln Kayu at 6.30pm sharp.

 

1. Roadrunner71 (red)

2. SuVespa (black)

3. Joajas (red with red box)

4. spai_duhz (black)

[Roadrunner71]

Makan After DIY Session

Sat 21 Jul, Jln Kayu

 

1. Lindavw

2. Roadrunner71

3. Paiseh (s**per)

[Roadrunner71]

actually i dun like the way my IU is mounted

For UG3, where else can u put the IU apart from the handlebar?

 

Those who bought the Ver 2 from Universal have the IU located under the windshield between the speedometer & tachometer.

[wiwaha]

Hi Bros,

 

Pulsar owner from Indonesia is increasing now, it already touch 8,000 units sales for 6 months. So it will be expected to increase until 10,000 units for 3 months ahead....pfuihhh....

 

This is my friend Pulsar. He is using Aprilia's Front & Back Wheels. Also Aprillia's back swing-arm and front fork. ....he is using bridgestone battlax 140-70-17 for back tire and 110-70-17 for front tire...

 

The silencer using Yoshimura with two end-hole...I think thats the Yoshimura Oval...

[joajas]

Hi Bros,

 

Pulsar owner from Indonesia is increasing now, it already touch 8,000 units sales for 6 months. So it will be expected to increase until 10,000 units for 3 months ahead....pfuihhh....

 

This is my friend Pulsar. He is using Aprilia's Front & Back Wheels. Also Aprillia's back swing-arm and front fork. ....he is using bridgestone battlax 140-70-17 for back tire and 110-70-17 for front tire...

 

The silencer using Yoshimura with two end-hole...I think thats the Yoshimura Oval...

 

does your friend need to modify anything to fit the aprilla's swingarm and fork?

 

The F.C must be terribly affected too.

 

But it looks good though

[spaiduhz]

woah. 140 rear and 110 front?...

 

Thats HUGE.

 

P180 UG3 / RS125 hybrid? Wah...

 

Still using stock foot rests for rear disc brakes? Man, i would really like to see ** close how your friends modded his bike.

 

Anyhoo, hows the millage?

[outspoken]

okie, outspoken's hazard lights are done. woot

 

Thanks Bro alex.Btw went to the Bajaj service centre and the mechanic says my exhaust is causing the sound and needs to weld it.cost me $15.since he took out the exhaust,pay them to clean the rust and spray it costing me another $10 and not to include the GST incur together.Luckily small problem and not the engine.