Bajaj Pulsar Lovers 2007

[lindavw]

change a rear tire - Pirelli MT75

$75 bux but still change tire, change ti tubeless la... so $5 for the stupid valve. nvm have to pay no choice.

 

H4 bulb will melt not only ur casing, it may fry ur wires too... cos the original is only 35w... 55w nearly x2 liaoz.

Get HID, beta if like only on high beam the HID kicks in. safer.

[joajas]

change a rear tire - Pirelli MT75

$75 bux but still change tire, change ti tubeless la... so $5 for the stupid valve. nvm have to pay no choice.

 

H4 bulb will melt not only ur casing, it may fry ur wires too... cos the original is only 35w... 55w nearly x2 liaoz.

Get HID, beta if like only on high beam the HID kicks in. safer.

 

dun really understand the underlined part, can explain?

[lindavw]

means the HID is connected to the high beam switch. only when u on high beam the HID in on. but need to do some mod in order to have 1 HID bulb n normal bulb in the casing.

[lindavw]

Maintenance is really cheap. 1litre of engine oil for every 2500km. a pair of tyres (normal type tubeless) is at most $160. parts.. im not too sure but i have been riding for 1.5yrs.. so far all available.

 

2nd hand ones (analog) cost abt $3.5k. digital ones maybe more. not too sure..

 

 

 

i changed at universal b4, cheapest pair is $130 only. the ones tat u saw on my bike in sch last time. u were disgusted with my tyres remember?

 

ya i remembered hahahaha that is the tire my father is using on his wave too OMG.

Anyway MT75 seems lasting to me... the mechanic even ask me this bike mileage really very good ah hahahahaha. Think front n back tire i will be using diff profile n brands liaoz... not gd la but no choice. hahahahaha

Told u this bike still very new in the market...

[Night_Hawk]

Survey: Purchase of Belly Pan for Pulsar (made in Indonesia)[/size]

 

http://img297.imageshack.us/img297/1232/pulsarbellypaneb5.jpg

 

Pls add ur nick to the list below if u're interested in the above. After which, I'll get in touch with Wiwaha to get a quotation.

 

 

1. Roadrunner71

2. Lanzer

3. Intelcore

4. Noraachan

5. Adriel78

6. Outspoken

7. Lancified

8. Blueyeagle

9. MyWord

10. Night_hawk

 

Btw I posted a few questions here. Would really appreciate it if any of you could help answer my queries. Thank you.

[spaiduhz]

Oh. shoots. forgot to check out prices for cyclometer.

just went to johor to fill petrol summore. -_-

 

When i DO remember to check out cyclometers i'll keep you guys updated.

 

In the meanwhile i will see if my cheap ass Cateye TOMO XC can fit. If my wired cyclometer can be mounted... i do not see any reason why any other cyclometer cant be mounted.

 

GO GO HANDY CABLE TIE!

[Roadrunner71]

Survey: Purchase of Belly Pan for Pulsar (made in Indonesia)

 

http://img297.imageshack.us/img297/1232/pulsarbellypaneb5.jpg

 

Pls add ur nick to the list below if u're interested in the above. After which, I'll get in touch with Wiwaha to get a quotation.

 

 

1. Roadrunner71

2. Lanzer

3. Intelcore

4. Noraachan

5. Adriel78

6. Outspoken

7. Lancified

8. Blueyeagle

9. MyWord

10. Night_hawk

[Roadrunner71]

change a rear tire - Pirelli MT75

$75 bux but still change tire, change ti tubeless la... so $5 for the stupid valve. nvm have to pay no choice

Luckily, when I had a flat rear tyre, the driver who drove the Bikebulance tow truck just plugged the puncture with the 'worm' - wat do u call that thing ah?

[spaiduhz]

Luckily, when I had a flat rear tyre, the driver who drove the Bikebulance tow truck just plugged the puncture with the 'worm' - wat do u call that thing ah?

 

its called a tire repair kit. most petrol stations should have it. easy to use too.

 

1. remove foreign object

2. file the internal diameter of the hole

3. insert the WORM.

4. paste the rubber putty over the hole.

5. Wait to dry

6. inflate... and yer good to go!

[Roadrunner71]

Survey: Purchase of Belly Pan for Pulsar (made in Indonesia). S$30 + S$6 shipping charge

 

http://img297.imageshack.us/img297/1232/pulsarbellypaneb5.jpg

 

Pls add ur nick to the list below if u're interested in the above.

 

1. Roadrunner71

2. Lanzer

3. Intelcore

4. Noraachan

5. Adriel78

6. Outspoken

7. Lancified

8. Blueyeagle

9. MyWord

10. Night_hawk

[S4RevoVtec]

i have install power abuser jus now, pick up speed improve and more powerful however engine is slighly louder, idle or full throttle.

[24seven]

Survey: Purchase of Belly Pan for Pulsar (made in Indonesia). S$30 + S$6 shipping charge[/color][/b][/size]

 

http://img297.imageshack.us/img297/1232/pulsarbellypaneb5.jpg

 

Pls add ur nick to the list below if u're interested in the above.

 

1. Roadrunner71

2. Lanzer

3. Intelcore

4. Noraachan

5. Adriel78

6. Outspoken

7. Lancified

8. Blueyeagle

9. MyWord

10. Night_hawk

11. 24seven

[paiseh]

Survey: Purchase of Belly Pan for Pulsar (made in Indonesia). S$30 + S$6 shipping charge

 

 

heh, count me out on this. any idea how much a tank bra costs?

[Lanzer]

i have install power abuser jus now, pick up speed improve and more powerful however engine is slighly louder, idle or full throttle.

How about vibrations? Any improvements?

[S4RevoVtec]

How about vibrations? Any improvements?

 

yes, improved. after installing i feel the 60km/hr is like my 80km/hr before installing PA2. pick up, very gd. 10mins job.

[myword]

i have install power abuser jus now, pick up speed improve and more powerful however engine is slighly louder, idle or full throttle.

 

Sounds interesting. Could you post some pictures of the installed product so we can have an idea how it looks in the bike?

 

Oh. shoots. forgot to check out prices for cyclometer.

just went to johor to fill petrol summore. -_-

 

When i DO remember to check out cyclometers i'll keep you guys updated.

 

In the meanwhile i will see if my cheap ass Cateye TOMO XC can fit. If my wired cyclometer can be mounted... i do not see any reason why any other cyclometer cant be mounted.

 

GO GO HANDY CABLE TIE!

 

You went to JB today? Me too. Lol. Only spotted one pulsar rider on my way there on a silver/gray pulsar.

 

This boils down to your personal preference. Some pros and cons listed as below:

 

Pros:

- Improved acceleration

- Deep bassy roar

- No need to replace air filter; only need to 'recharge' the K&N filter every 10k

- Improved fuel efficiency (theorically. real life only some bros experience it)

 

Cons:

- Have to cut the air filter box or custom make a bracket in order to install the filter.

- Low chance of engine choke (very low, only happens when water gets into the filter

- Might lose top speed (if not tuned properly)

 

Price : ~ SGD$50 (have to import, singapore dun have)

 

You have to ask yourself, do you really want the extra acceleration? To achieve best results, it is highly recommended that you:

- install K&N filter

- install better spark plugs (at least a platinum)

- change jet size to 125 (stock is 110)

- get a very good mech to do tuning (poor tuning will result in LOW FC and lousy acceleration + top speed)

 

Hey, thank you very much for taking the time to answer my query. I Don't mind giving the product a try but if I'm not satisfied with it can I remove it at a later time?

[Roadrunner71]

heh, count me out on this. any idea how much a tank bra costs?

Wiwaha hasn't revert to me regarding the tank bra. Dunno whether have or not in the 1st place. I thought u've emailed him? He didn't reply to u?

 

Btw, he said no Yoshi full system. Only the Yoshi silencer (I assumed he's talking abt the end can) that costs S$100 nia! But 'single oval', not bi-oval or tri-oval.

[Roadrunner71]

Sounds interesting. Could you post some pictures of the installed product so we can have an idea how it looks in the bike?

 

The PA2 is placed next to the batt, then the RHS cover is locked back in place. So from d outside, can't see the installed PA2.

 

I Don't mind giving the product a try but if I'm not satisfied with it can I remove it at a later time?

Can. But gotta buy new stock air box (cos the original would've been cut) and air filter (unless u didn't throw away the original)

[paiseh]

Wiwaha hasn't revert to me regarding the tank bra. Dunno whether have or not in the 1st place. I thought u've emailed him? He didn't reply to u?

 

Btw, he said no Yoshi full system. Only the Yoshi silencer (I assumed he's talking abt the end can) that costs S$100 nia! But 'single oval', not bi-oval or tri-oval.

 

he reply me ok only leh haha

[Roadrunner71]

Survey: Purchase of Yoshimura End Can ('single oval') for Pulsar (from Indonesia but made in Thailand). S$100 + shipping charge of $12/kg

 

http://img515.imageshack.us/img515/8706/yoshiendcanpc3.jpg

Pic of actual end can will be uploaded by Sat.

 

Pls add ur nick to the list below if u're interested in the above.

 

1.

2.

3.

4.

5.

[S4RevoVtec]

Yoshimura End Can --> Is it legal?

[outspoken]

Bro,most prob im interested cos my exhaust like koyak already.sometimes the "sound" comes back and sometimes dun have..but feeling irritating if goes on like that. btw need to know few details before we can actually purchase.

 

1 - do we have to check with the authority whether it is legal to be use?im scared later bring in already then LTA not approved.

 

2 - Have you check on whats the modification needed for the end can to be installed on our pulsar? btw that goes for the belly pan...any mod need or its like plug and play?

[wiwaha]

Bro,most prob im interested cos my exhaust like koyak already.sometimes the "sound" comes back and sometimes dun have..but feeling irritating if goes on like that. btw need to know few details before we can actually purchase.

 

1 - do we have to check with the authority whether it is legal to be use?im scared later bring in already then LTA not approved.

 

2 - Have you check on whats the modification needed for the end can to be installed on our pulsar? btw that goes for the belly pan...any mod need or its like plug and play?

 

I will try to answer you:

1. Since the Yoshi from thailand which is the road law is the same with spore, i think it will be no problem with you guys there.

2. No modification need for belly pan. Just plug and play. its already include the bracket for mounted. you can DIY.

For the end can, you should cut your ori silincer...i think in spore there is a lot of workshop can do this thing...

[outspoken]

How about the installation of the yoshi end can?..is it plug and play or need major/minor modification?..care to inform us?....

 

Does the belly pan comes with only black colour?

 

hopefully got tank-bra down there..really need that the most.

[paiseh]

street legal or not, really have to check if LTA approves the sound. if too loud den illegal. anyway, need to cut the original exhaust to fit the yoshi..

 

kena summon is $500 - $700