[Group] SUZUKI Bandit

[DatsunKing]

Originally posted by S750WP@Jan 12 2005, 04:32 PM

I got 4 bulbs for $5, try to get the clear one, because the color one wont fit. I tried before.

 

The bulbs are very small, length is abt 8mm, and it wedge type, meaning the end is flat.

 

Mah motorparts is located opp SLT, along Jalan Besar, just travel a little further from KS and turn in at Dunlop St, then make a left turn into the small lane. Look for Jefferey Mah the boss, very friendly and helpful.

This type of bulb quite normal and cheap 1... My dad's workshop also got sell... Sell u 1 for $1 also can... But i got a friend's bandit meter got colour 1... Dunno where he get 1 also... Think next time ask my dad take colour one... For those who dunno his shop is at Location

 

 

Another photo...

http://picturesky.com/albums/userpics/11141/normal_Picture%20065.jpg

[chee_teck]

I really think its a good idea to meet up for some photo taking hehehe

 

So when will tht be? I hope weekend (preferably sun)

 

And the DIY session 10pm or 10am? Just noticed the timing...Siow ar! 10 pm wana work until wht time wor? 10pm i cannot make it la.Got a meet up with an old friend. 10am i can rush over after i finish my work

 

Kenneth

[DatsunKing]

Originally posted by chee_teck@Jan 13 2005, 01:49 AM

I really think its a good idea to meet up for some photo taking hehehe

 

So when will tht be? I hope weekend (preferably sun)

 

And the DIY session 10pm or 10am? Just noticed the timing...Siow ar! 10 pm wana work until wht time wor? 10pm i cannot make it la.Got a meet up with an old friend. 10am i can rush over after i finish my work

 

Kenneth

Not saturday meh? on top wrote saturday right?

[matias80sg]

Originally posted by DatsunKing@Jan 13 2005, 01:40 AM

This type of bulb quite normal and cheap 1... My dad's workshop also got sell... Sell u 1 for $1 also can... But i got a friend's bandit meter got colour 1... Dunno where he get 1 also... Think next time ask my dad take colour one... For those who dunno his shop is at Location

 

 

Another photo...

http://picturesky.com/albums/userpics/11141/normal_Picture%20065.jpg

upz for his father...remember go there and look for MR VINCENT.

he is datsunking father.....and he is also call bandit king!!!

he can solve all the problems of bandit..thumb up for him!

[steng_z]

Originally posted by DatsunKing@Jan 13 2005, 01:53 AM

Not saturday meh? on top wrote saturday right?

hi...will come down and meet u all.....

 

S750WP:anythin i sms u ok...

 

DatsunKing:er..ur father workshop doin car or motorcycle...??

 

guyz...anyone noe where can find 2nd hand side fairing for bandit any color ..???how much..??

[S750WP]

Originally posted by matias80sg@Jan 13 2005, 01:55 AM

upz for his father...remember go there and look for MR VINCENT.

he is datsunking father.....and he is also call bandit king!!!

he can solve all the problems of bandit..thumb up for him!

You want the E45 box, I have one for sale, then you can match up with the other 2 bandits.

[jkaiser]

clutch plates wear out is no power rite...

then very hard to down gear means wat, clutch sleeve?

[kata_killer]

If U guys wanna to meet in d noon, I'm also okay.... I'm free from 12pm onwards....

[S750WP]

Originally posted by kata_killer@Jan 13 2005, 09:06 PM

If U guys wanna to meet in d noon, I'm also okay.... I'm free from 12pm onwards....

Afternoon is fine with me too, coz sunday I'm working day shift.

[S750WP]

Originally posted by jkaiser@Jan 13 2005, 07:23 PM

clutch plates wear out is no power rite...

then very hard to down gear means wat, clutch sleeve?

I'm experiencing diff in shifting down, only when the bike is very hot when riding in the city, however for long distance ride when the bike cools down shifting is smooth and easy.

 

I;m thinking it could be my clutch plate wearing out, and as the oil gets hot its viscosity drops(oil getting thinner) and worn clutch plate are rubbbing more closely against each other causing friction.

 

I find that a correctly tension chain and clutch cable, clean and lubricated chain, good engine oil, plus a well syn carb(bike runs smoother and cooler) gear shifting will be easier.

[DatsunKing]

Originally posted by steng_z@Jan 13 2005, 10:41 AM

hi...will come down and meet u all.....

 

S750WP:anythin i sms u ok...

 

DatsunKing:er..ur father workshop doin car or motorcycle...??

 

guyz...anyone noe where can find 2nd hand side fairing for bandit any color ..???how much..??

My dad's shop is bike one... Wa u want fairing for what? To make this?

 

 

http://predator.bikepics.com/pics/suzuki-bandit400-97-bikepics-230378.jpg

[skybono]

Originally posted by DatsunKing@Jan 13 2005, 01:40 AM

This type of bulb quite normal and cheap 1... My dad's workshop also got sell... Sell u 1 for $1 also can... But i got a friend's bandit meter got colour 1... Dunno where he get 1 also... Think next time ask my dad take colour one... For those who dunno his shop is at Location

 

 

Another photo...

http://picturesky.com/albums/userpics/11141/normal_Picture%20065.jpg

nice...

[steng_z]

Originally posted by DatsunKing@Jan 14 2005, 12:42 AM

My dad's shop is bike one... Wa u want fairing for what? To make this?

 

 

http://predator.bikepics.com/pics/suzuki-bandit400-97-bikepics-230378.jpg

my side fairing(below the tank)...crack lor..don noe wheather can epoxy or not...may i try to epoxy first hahahaha....

 

 

ps:how u all edit the pic ar....i few time try it but got error lor....

[kata_killer]

My postal code is 090012, you can check how to go to my place using http://www.streetdirectory.com.sg by keying your postal code to my postal code.

 

Bandit400 Grounding Wire DIY Session

********************************

 

Date: 15 Jan 2005 (Saturday)

[COLOR=red]Time:2PM (Timing Change)[/color]

Location: 14A MSC, Postal code 090012

Organiser: S750WP

Chief Mech and Consultant : Kata_Killer

 

Tools provided by S750WP: Hammer, alan-key Size 8 to 12. Bolt on spanner from size 8 - 10. Wire cutter, black tape, scissor.

 

Things need to bring: Your own grounding wire and connectors if not can order from Kata_Killer for $35 per kit(only left with 2 sets please inform him earlier). you and your bike.

 

P/S: Can take mass photo shoot on that day also, so dress up your 'baby'

 

Participant

*********

1. Kata_killer

2. S750WP 96411722

3) Kenneth

4) datsunking (Might be bringing my 2 friends coming for the photo shoot) Will Bring camera and tripod... But if u guys got better 1 u all bring lar... Cos my camera normal 1....

 

 

http://picturesky.com/albums/userpics/11141/normal_Picture%20064.jpg

 

Another picture me and my friends took....

[S750WP]

My postal code is 090012, you can check how to go to my place using http://www.streetdirectory.com.sg by keying your postal code to my postal code.

 

Bandit400 Grounding Wire DIY Session

********************************

 

Date: 15 Jan 2005 (Saturday)

Time:2PM (Timing Change)

Location: 14A MSC, Postal code 090012

Organiser: S750WP

Chief Mech and Consultant : Kata_Killer

 

Tools provided by S750WP: Hammer, alan-key Size 8 to 12. Bolt on spanner from size 8 - 10. Wire cutter, black tape, scissor.

 

Things need to bring: Your own grounding wire and connectors if not can order from Kata_Killer for $35 per kit(only left with 2 sets please inform him earlier). you and your bike.

 

P/S: Can take mass photo shoot on that day also, so dress up your 'baby'

 

Participant

*********

1. Kata_killer

2. S750WP 96411722

3) Kenneth

4) datsunking (Might be bringing my 2 friends coming for the photo shoot) Will Bring camera and tripod... But if u guys got better 1 u all bring lar... Cos my camera normal 1....

[imported_DREAM_MACHINE]

Hi guys..i've collected my bike frm Guan Hoe..Firstly..the bike feels a lot diffrence..Power responses is good,bike feels lite n smoother ride..Really satisfied wit the workmanship but need some comments on the pricing thou..

Here comes the reciept.

4 pc 13357-74C00 - o ring $11.20

4 pc 13374-35C00 - o ring $11.60

4 pc 13374-46710 - o ring $11.20

6 pc cam cover gasket $19.20

Coolent $10.00

General svc/workmanship $45.00

GST $5.41

Total $113.61

 

SVC DONE

Carb svc/sync/tuned

Valve clearance

Coolent flush.

Oil/oil filter change

Air filter

plugs

 

Note that i supplied the engine oil,plugs,oil filter,air filter.

Wat do u guys tink?

[S750WP]

Originally posted by DREAM_MACHINE@Jan 14 2005, 01:30 PM

Hi guys..i've collected my bike frm Guan Hoe..Firstly..the bike feels a lot diffrence..Power responses is good,bike feels lite n smoother ride..Really satisfied wit the workmanship but need some comments on the pricing thou..

Here comes the reciept.

4 pc 13357-74C00 - o ring $11.20

4 pc 13374-35C00 - o ring $11.60

4 pc 13374-46710 - o ring $11.20

6 pc cam cover gasket $19.20

Coolent $10.00

General svc/workmanship $45.00

GST $5.41

Total $113.61

 

SVC DONE

Carb svc/sync/tuned

Valve clearance

Coolent flush.

Oil/oil filter change

Air filter

plugs

 

Note that i supplied the engine oil,plugs,oil filter,air filter.

Wat do u guys tink?

What kinda o-rings did you change? for carburetor one issit? I have not change mine before so I cant comment on the price.

 

But for the cam cover gasket the small one, it cost only $2 ea at KS. Total $12 for 6 pcs.

 

Coolant change $10 is ok, but did he flush your radiator? I guess you spent close to $200 for your servicing inclusive of your own parts.

 

Engine oil approx $48 - $54 (Fully syn)

Oil filter $6

Air filter $13

Plugs $28

[kata_killer]

My postal code is 090012, you can check how to go to my place using http://www.streetdirectory.com.sg by keying your postal code to my postal code.

 

Bandit400 Grounding Wire DIY Session

********************************

 

Date: 15 Jan 2005 (Saturday)

Time:8PM (Timing Change)

Location: 14A MSC, Postal code 090012

Organiser: S750WP

Chief Mech and Consultant : Kata_Killer

 

Tools provided by S750WP: Hammer, alan-key Size 8 to 12. Bolt on spanner from size 8 - 10. Wire cutter, black tape, scissor.

 

Things need to bring: Your own grounding wire and connectors if not can order from Kata_Killer for $35 per kit(only left with 2 sets please inform him earlier). you and your bike.

 

P/S: Can take mass photo shoot on that day also, so dress up your 'baby'

 

Participant

*********

1. Kata_killer 92711997

2. S750WP 96411722

3) Kenneth

4) datsunking (Might be bringing my 2 friends coming for the photo shoot) Will Bring camera and tripod... But if u guys got better 1 u all bring lar... Cos my camera normal 1....

 

Due to some other commitment I need to attend, grounding wire installation time will be at 8pm sharp. Sorry for d trouble causes. At this hrs, think Kenneth can come liao. Installation will only take less then an hrs to complete.

 

Regards

Pierre

[Guest RG]

Originally posted by DREAM_MACHINE@Jan 14 2005, 01:30 PM

Hi guys..i've collected my bike frm Guan Hoe..Firstly..the bike feels a lot diffrence..Power responses is good,bike feels lite n smoother ride..Really satisfied wit the workmanship but need some comments on the pricing thou..

 

Note that i supplied the engine oil,plugs,oil filter,air filter.

Wat do u guys tink?

Are u happy with the whole thing?

Did u get wat u paid for?

Do u think it's worth it?

 

If YES, does the price really matters?

[imported_DREAM_MACHINE]

Yup..extremely satisfied wit the workmanship..The bike feels so much better.

Paying a little more for good workmanship is fine for me..

 

Next pitstop>tyres/-chain n sprockets

Any recommend guys?pls kindly include the loc/price/original or not.

 

S750WP>bro,the bulb is the correct ones..found out when i opened the

speedo myself.(the old mech said it was the wrong ones when i asked him to change it when my bike was there).Btw, do u still hav ur s4 signals for sale?

 

Wat if i were to colour the clear bulb wit blue permenant marker?will the light cum out blue or........?Anyone done it b4?seems to b a stupid qns thou..

Thx guys for replinG.

 

CHEERS

[steng_z]

1.Engine Oil (4T)

Castrol R4, 3 bottles + original oil fittler

Motoworld Price $68 (Promotion) ; Just verified on 6 Sept 2003.

Pleasure Motorsports PL Fuch semi 20-50, 3.2L $16

R4 $16 @ HKL

Total 1L -$4.30 cheap and good from carrefour (semi syn)

Esso Gold HKL selling $15

Motul 5100 Ester 15W50 (semi syn), HKL, $13 per bottle

Royal Purple @ Tanjong Pagar Plaza $11/bottle

 

2. Tires

Front tyre 090 110/70 for $88 @ LAB (P-model-front)

Dunlop GPR70 110/70-17 $115 @ Motorworld (P-model-front)

Tyres batlex Brigdestone BT090, front(110/70), rear(150/60),HKL, $240.

Bridgestone BT45 frt & rr $155 @ pleasure moto(NEXT AH BOY WORKSHOP)

Bridgestone BT39 frt & rr $160 @ pleasure moto.(NEXT AH BOY WORKSHOP)PS:come with wheel balancing

Michelin Macadam sports touring tyre front - $135 @Pang Scooter

BT020 rear 150/70 fromLAB for $145

 

3. Chain & Sprockets

Frt sporket(with rubber in center),RR sporket & DID o-ring $195 @pleasure moto

Frt sporket(with rubber in center) $35 from KS

 

 

4. Brakes

Daytona front pads @ Chiong Aik along Joo Chiat Road - $20

Vesrah sintered brake pads $35 front

Vesrah organice brake pads $17 rear

Vesrah sintered front brake pads $35(not inclusive of gst) Eversuccess

Ferodo rear pads -$15

 

5. Handlebar/grips

$23 - Harris grip @ 219 Motor shop @ Lavender

$8 - Playlife grip@ mah motor

$23- Harris grip@ Unity bt merah

$25-Harris grip @ Chiap Lee

$6-GPR grips@ Warehouse sales(forget which shop liao)

Balancer $6 @LAB

ERP bracket $15 @ Mah

 

6. Engine guards

$70-motovation sliders

 

7. Boxes/racks

$205 E450 with brackets @ LAB (w/install)

RM 560 wing rack include installation @ bike shop in MLK

 

8. Batteries

$50 @ HKL yuasa

$55 @ HKL bigger size and power?

$55 @ LAB, "Made in Japan" furukawa

$60 @ Kilvile, Ubi.

$45 @ KS cycle YUASA

 

9. Rectifier

$125 @ KS motorcycle

 

 

10. Steering cone

( FJT $35 part, Fix Malaysia $30 )

$70 @ Southern Bt Merah + installation

$80 @ LAB workshop + installation + Fork oil

 

11. K&N recharger kit

$18 @ Mah Motor

 

12. Air filter

SGP(VV Model), $44.50, Guan Hoe

P model $13 @KS motorcycle

 

13. Oil filter

RM35 Bike Shop in Malacca

(duno brand), $8, Guan Hoe

$6 from KS motorcycle

 

14. Bike respray

$40 Exhaust header sand and respray with hi-temp @atan at ubi

Customised 3x19mm Suzuki logo sticker x 2 for $7 @ MotorX

Customised 3x19mm Bandit logo sticker x 2 for $7 @ MotorX

Spanjard high temp spray paint $10 @ Mah motorparts

 

15. Fork brace

Fork Seal $16 per pc - HKL then workmanship @ Pioneer Rd North $30

2xfork oil seal, 2xdust cover and 2xmetal clip for both fork for $44 – KS cycle

500ml Putoline 15w fork oil $7 ea @LAB

Workmanshop for fork seal replacement $20 per fork @ Seng Motor Alexandra

 

16. Alarm

CHeetah Alarm (water proof version) @ motorX

w/o install $48

w/ installation $58

CHeetah Alarm (water proof version) Sim lim Tower, $58, self install

 

17. Belly Pan

Powerbronze @ Biketech 21 for $150

 

18. Spark Plug

$12 per piece CRE8K – nit 4 piece Bike shop at Pioneer Rd

NGK(CR8E or CR9E),DENSO(U27ESR-N), $12, Guan Hoe

NGK(CR8E or CR9E), $6, HKL

Denso U24ETR - $4 each @ FJT or the shop beside it

CR8EK from KS @ $7

 

19. SparK Plug Cap

(SGP)spark plug cap, $21.70 each, Guan Hoe

(SGP)cap rubber, $3 each, Guan Hoe

Spark plug cap NGK, $7 each LAB

 

 

20. Ignition Lock

 

21. Hugger

 

22. Clutch cable

Shop beside Dexing(Bukit batok), $24,

Clutch lever ,Shop beside Dexing(Bukit batok), $15,

Clutch plate,gasket,eng oil @160 (pleasure moto)

 

23. Coolant

Mah motor flush coolent $25 workmanship, use 1 spaajard radiator flush $5 and 4 x $4 castrol pre-mixed coolent. Total = $46

Mah motor change coolent $10 workmanship. Cost would be $26 (labour $30.00)

Mah motor flush coolant $25 workmanship, use 1 spaajard radiator flush $5 and 4 x $4 castu)

Putoline Premixed coolant 1L, $5 per bot @LAB

Redline water wetter, 355ml mixed with 18L distilled water, $28 @ MotorX

Castrol Premixed coolant 500ml for $3.50 @ BP

 

24. Rear/Front wheel sealed bearings.

Rear wheel sealed bearings $40.00 with dust cover (Excluding labour $30.00)

Planet change front and rear wheel bearing(w/o sprocket bearing) 4pcs = $56 inclusive labour.

$14*2 Front wheel bearing - Pioneer Rd North Bikeshop (w/wrkmanshp)

 

25. Under Tray

LAB $ 30 thin or Better $40

 

26. Cutch Pad

$85 @ KS motorcycle

 

27. Carbon Starter

$65 for 01 x Carbon starter + labour @ Mah Motor.

 

28. Bulb

Speedometer/Tachometer bulbs, $3 each, Guan Hoe

Speedometer/Tachometer bulbs, $5 for $4 @ Mah motor

 

29. Tensioner

$72.40, Guan Hoe

 

30. Ignition Coil

$130 for 2 pairs - KS motorcycle

$200 for 2 pairs - Guan Hoe with workmanship

 

31. CDI

$420 KS motorcycle

$490 Guan Hoe

 

32. Rocker arm

$35 @ KS motorcycle

 

33. Float assembly

4pcs in a set for $140 @KS motorcycle

 

34. Rear brake dust seal and oil seal

$16 for seals only @ FJT (Honda Super 4 parts)

$48 for seals and piston @KS motorcycle

 

35. Front brake dust seal, oil seal, pistons

$33 for complete set @ KS motorcycle

 

36. Reconditioned radiator

$150 @ URS radiator service UBI (need to dismantle and bring to shop)

 

37. Carb cleaner

Prestone carb cleaner $3 @ Seng motor parts Alexandra

 

38. Stebel horns inclusive of relays

$20 @ Seng motor parts Alexandra

 

39. Engine Oil Hose

$96 for a pair (L&R)

 

 

 

 

 

Guan Hoe Co., (M) Pte Ltd, Blk 1043, No 148, Eunos Ave 3, S409847

Tel: 67465910

 

K S Motorcycles Co, 127 Jln Besar S208845

6294 9316

 

Bandit riders:

 

1) chinjoon 98213944

2) Kenneth 93897446

3) skybono 97909830

4) riDerz 96283626

5) S750WP 96411722

6) jkaiser 91847045

7) steng_z 94761877

8) Eatmanx 98479363

9) Pierre 92711997

 

Please update took me some time to dig this posting again

kenneth

 

 

PS: updated riders

 

ps:DREAM_MACHINE this is the list for ur info....and dun 4get to update ur name and hp number....*wink...

[imported_DREAM_MACHINE]

Thx a lot bro for the list..really helpful...

here"s the list.Updated.

 

Bandit riders:

 

1) chinjoon 98213944

2) Kenneth 93897446

3) skybono 97909830

4) riDerz 96283626

5) S750WP 96411722

6) jkaiser 91847045

7) steng_z 94761877

8) Eatmanx 98479363

9) Pierre 92711997

10)Dream_Machine 91867049

[imported_DREAM_MACHINE]

Any of u guys using sleek black side mirrors?

me wanna change mine lah(stock)..Wat bike"s model? n where to get?

Cheers!!

[S750WP]

Originally posted by DREAM_MACHINE@Jan 14 2005, 05:42 PM

Yup..extremely satisfied wit the workmanship..The bike feels so much better.

Paying a little more for good workmanship is fine for me..

 

Next pitstop>tyres/-chain n sprockets

Any recommend guys?pls kindly include the loc/price/original or not.

 

S750WP>bro,the bulb is the correct ones..found out when i opened the

speedo myself.(the old mech said it was the wrong ones when i asked him to change it when my bike was there).Btw, do u still hav ur s4 signals for sale?

 

Wat if i were to colour the clear bulb wit blue permenant marker?will the light cum out blue or........?Anyone done it b4?seems to b a stupid qns thou..

Thx guys for replinG.

 

CHEERS

Just wondering is the bike able to go above 120km/h now?

 

For chain and sprockets, use original front sprocket, rear sprocket you can use renthal, chain use DID, RK, EK x-ring or o-ring chain. Personally I feel o-ring is good enoigh for our bike. I think the best place to get it cheap is at LAB, however his mechanic sucks.

 

I only have the front original Super 4 signal lights for sale $10 for a pair, can wire up to have the signal light on like Super 4, but you need to find your own means to mount them because the mounting rubber is not available when I got them, and I think FJT at rowell road sells it but not sure how much.

 

You can try and see how is the effect? but I believe it will not be as bright as the clear one when you paint it blue with marker.

[Shawn--]

hi guys.. i just bought a suzuki sprocket from LAB Rear size 46 last week. Used for 2 rides.Currently downgraded to size 44. Anyone wan a cheap n new rear.. can msg me.