Woopa!! Cbr1000rr Riders

[plasticprison]

oic. thanks for the information. hope to join you guys real soon for outings if there's any.

[C70]

Guys, went to amk workshop this morning, try to fix or modify both the missing air filter holder for my o4' blade, but mechanic has no idea and could not find the spare part, told by bike production to go to their shop to let them check as i bought this bike from them, ok off i go, reached there and eddie the mechanic open up the plastics and tilt up the fuel tank 90 degree, i curiously touch the tank with my bare hand, it was hot ! No less than 50'C i would say, being the location of the tank close to the hot engine especially if riding cought in the traffic, engine temperature can easily go up to 100'C.

Question is does this tank has another inner layer of metal that hold the fuel ?

The warm fuel will cause the comsumtion high at the same time it will evaporized if get warmer.

 

 

 

 

 

 

 

Wwe

[craz_03]

Guys, went to amk workshop this morning, try to fix or modify both the missing air filter holder for my o4' blade, but mechanic has no idea and could not find the spare part, told by bike production to go to their shop to let them check as i bought this bike from them, ok off i go, reached there and eddie the mechanic open up the plastics and tilt up the fuel tank 90 degree, i curiously touch the tank with my bare hand, it was hot ! No less than 50'C i would say, being the location of the tank close to the hot engine especially if riding cought in the traffic, engine temperature can easily go up to 100'C.

Question is does this tank has another inner layer of metal that hold the fuel ?

The warm fuel will cause the comsumption high at the same time it will evaporized if get warmer.

 

Wwe

 

one explanation would be... where can the petrol evaporate to??

lol .. still inside the fuel tank.

 

http://en.wikipedia.org/wiki/Flash_point

 

check the fuel flash point n auto ignition temp rate.. =)

 

n quoted from some help pages..

this guy posted..

"In this last case, the injectors are designed such that the gasoline is ejected towards the admission valve surface, which turns out to be really hot, and helping for the vaporization of fuel."

 

so i reckon tat below the fuel tank will get quite hot.. not only our engines..

all the engines.... lol

 

Biodiesel >130 °C (266 °F)

[Yongster]

I love bikes in boxes, I love it even more if the box is delivered to my home, haha.

sure...... hw abt u order a new bike, the bike goes to mi and i will personally deliver the box to yr place.......

[Okada17]

Ok ty for help.. i go trY it again cau i hv problem to put my helmet in it.. haha cau still new to tis bike ar

 

No problem.... Always ready to help fellow riders....

[Okada17]

Hi guys, i am actually looking to buy a RR5. when i tested the bike, i noticed that the rear foot brake doesnt seem to engage when i stepped on it, even at its maximium. the owner said this is normal at low speed and the brakes will actually engage when riding at higher speeds..

 

so i was wondering if this is normal. sorry for the noob question. appreciate the replies.

 

ehh.. for most of the cl2 bikes.. the rear brake no power..

if got power sure slip....

 

so.. u wan got power or not? lol

 

Craz_03 is right.... Rear brakes are practically useless in class 2 bikes.... In fact, I've stopped using my rear brake now.... And engaging the rear brake at high speed is asking for trouble - fishtail.... I experienced that before.... Trust me, your b*lls will not be in your throat but in your eye sockets.... LOL

Edited March 3, 2010 by Okada17

[Tashi]

sure...... hw abt u order a new bike, the bike goes to mi and i will personally deliver the box to yr place.......

 

What a helpful fellow Blader. I think the 2010 most helpful Blader award should go to you.

[shujayath]

Thx guys for ur valuable comments on my issues....

 

when can we all meet up ? i hav bought ths CBR, new to Singapore and dont know whr to chillout as i dont hav many friends.... so looking forward to attend any of the meeting so tht I can get to know u guys....

 

oh one more question is it legal to have a tinted (in red) headlight protector ? if red is not legal which colour is legal ?

 

Thx

[Okada17]

Thx guys for ur valuable comments on my issues....

 

when can we all meet up ? i hav bought ths CBR, new to Singapore and dont know whr to chillout as i dont hav many friends.... so looking forward to attend any of the meeting so tht I can get to know u guys....

 

oh one more question is it legal to have a tinted (in red) headlight protector ? if red is not legal which colour is legal ?

 

Thx

 

Well, by law only clear & non-coloured.... But so far, tinted (smoked) ones seemed ok (as long as your headlights are visible from far).... Other than that red, green, blue etc arent allowed.

[craz_03]

Thx guys for ur valuable comments on my issues....

 

when can we all meet up ? i hav bought ths CBR, new to Singapore and dont know whr to chillout as i dont hav many friends.... so looking forward to attend any of the meeting so tht I can get to know u guys....

 

oh one more question is it legal to have a tinted (in red) headlight protector ? if red is not legal which colour is legal ?

 

Thx

 

WELCOME TO THE REPUBLIC of seebyePORE~

governed by the lees.. n nth but the lees.. =)

 

lol

[craz_03]

btw, guys,

wat are some of the mods u guys do?/

flapper mod, ram air intake *remove resonator*, cut v-stack shorter,

 

put pc3,

 

 

n also... the advantages of an ignition module...

 

wat else are the performance mods for rr4-rr7 owners?

[blackprince]

anyone selling illegal slip on exhaust for cbr 1000rr 2004? call or sms at 96994393 if u r selling

[ghost04]

haha come on u r getting something exotic already...

making my hand itchy again...lol!!

[NightPhantom]

btw, guys,

wat are some of the mods u guys do?/

flapper mod, ram air intake *remove resonator*, cut v-stack shorter,

 

put pc3,

 

 

n also... the advantages of an ignition module...

 

wat else are the performance mods for rr4-rr7 owners?

 

nicky mod... performance of the mind... hahaha.. be4 u even ride, u look @ it... u feel happier.. +10hp...

[guangson]

errr..inspection that time. they got check the pipe?? you all put back the silencer before going for inspection??

 

i did not go for the inspection for the pipe also..arghh!! bought the bike with arrow already...

 

if previous owner has done the pipe inspection before, do i still need to inspect again???

 

hate to see letters coming to your door step.. insurance, road tax, inspection....broke!!!!!

[Yongster]

btw, guys,

wat are some of the mods u guys do?/

flapper mod, ram air intake *remove resonator*, cut v-stack shorter,

 

put pc3,

 

 

n also... the advantages of an ignition module...

 

wat else are the performance mods for rr4-rr7 owners?

Mod the rider....... bike will automatic become powerful in all road conditions.....

[Xiangfei]

Hi Guys,

 

anyone know how to remove leovince sliencer?? Tried removing the screw below, but somehow or rather the sliencer doesn't move? Any idea?

[mx_catfish]

Hi Guys,

 

anyone know how to remove leovince sliencer?? Tried removing the screw below, but somehow or rather the sliencer doesn't move? Any idea?

 

Is it a new exhaust? I have a hard time taking the DB Killer out when I just got my LV. Had to go to my mechanic to pull it out using heavy duty clamps and pliers... I had the surfaces grinded a little so the silencer can be removed and installed easily.

[craz_03]

Hi Guys,

 

anyone know how to remove leovince sliencer?? Tried removing the screw below, but somehow or rather the sliencer doesn't move? Any idea?

 

ehh... or maybe its an "aftermarket silencer"?

 

heehee.. bring to mech n check it out..

[Sn0w_MaN]

anyone looking for headlight protector? i am selling so let me know if u r interested

not too sure does it fit good on cbr1000 as pervious owner was riding a 600

 

http://www.singaporebikes.com/forums/showthread.php?t=279996

[d3an_cain]

In other news today, the 2010 CBR1000RRA arrives at our local shores.

 

where was the pic taken? i also 1 my future bike pic taken when it is still in the crate...:angel:

[shujayath]

Bros help needed again .... ;-)

 

Bridgstone BT 003 or BT 016 for rear CBR RR 06... ???? which one is the best for road use wit cornering .... plz help Front got Bridgstone Bt 045... need to decide by afternoon cos goin to change thm...

 

Have gud and safe rides

[craz_03]

Bros help needed again .... ;-)

 

Bridgstone BT 003 or BT 016 for rear CBR RR 06... ???? which one is the best for road use wit cornering .... plz help Front got Bridgstone Bt 045... need to decide by afternoon cos goin to change thm...

 

Have gud and safe rides

 

as mentioned b4..

good for cornering

 

K2, dragon supercorsa, or power1..

=)

[Vonmuck]

as mentioned b4..

good for cornering

 

K2, dragon supercorsa, or power1..

=)

 

Racetec K2.

 

loved it.

 

thinking of trying PP 2CT. comments?

 

190/50, 180/55 or 190/55?

[craz_03]

Racetec K2.

 

loved it.

 

thinking of trying PP 2CT. comments?

 

190/50, 180/55 or 190/55?

 

wld rather recommend u to get p1..