[Discussion] Technical - Cosmetic Modifications

[1Seth1]

if it does not fit, do the weapons style, (i'm an armourer) wrap black tape round it till it fits. wrap the top and bottom, it'll hold like super glue.

[ZzGaNgStErzZ]

anyone can help??? i wanna cut a red bull can to fit my suspensio canister cuz i dun like the colur but i dunno how to cut n get the correct fitting i believe some of u guys know here

 

huh? dunno how to cut? get the correct tools to cut and paste it with double sided tape(unless u wanna try the black tape method ). if it doesnt fits, place it in a place whereby the ugly part is not visible.

[Revouis]

the redbull can if wanna cut a very nice round shape i dunno wanna use wat tool to do it ma thats why asking in the forum

[ZzGaNgStErzZ]

the redbull can if wanna cut a very nice round shape i dunno wanna use wat tool to do it ma thats why asking in the forum

 

er..... use cutter lohz.

[loyjwe]

any1 have pic of where they install their voltmeter? coz plan to install 1 but dunno shd install where better and safer as mine is without any visor or head 1. but dunno where to install.

[rayhunter]

any1 have pic of where they install their voltmeter? coz plan to install 1 but dunno shd install where better and safer as mine is without any visor or head 1. but dunno where to install.

 

those round type with a holder ?

[loyjwe]

any type coz also trying to look for 1 not so exp and 1 2 find out where can i install on. thanks

[rayhunter]

any type coz also trying to look for 1 not so exp and 1 2 find out where can i install on. thanks

 

search the advertiser's board,you might find those small rectangular voltmeter,very nice and neat.able to fix around the center part of handle bar.

[Stardust83]

Go get ur 2A and get an S4, then mod it the way you like lah.. riding kup nia.. chill out lah..

 

and btw... ur ugly. no offense. =D

 

Wah bro...u power lah...Damn offensive...lolx...

[loyjwe]

search the advertiser's board,you might find those small rectangular voltmeter,very nice and neat.able to fix around the center part of handle bar.

 

u mean install on the handlebar in between the 2 riser? with wat holder? thanks

[Revouis]

hey guys share all ya cosmetic things that can be done lehz...running out of ideas sio

[loyjwe]

just bought a rectangluar voltmeter but no idea where to install. thot of using onli double sided tape n cable tie on top of handlebar between the risers but dun feel secure. any other idea where to place or how to enhance its security? thanks

[Revouis]

u just go bike shop get a voltmeter mounting....and drill a hole in ya headlight there n get it mounted can already bro

[starr]

bros. i observed some of the S4 ard have their "tail" kinda up higher than the normal ones. any idea how and where to do it? cause i'd like to have it on mine. it looks good.

[nesquik]

bros. i observed some of the S4 ard have their "tail" kinda up higher than the normal ones. any idea how and where to do it? cause i'd like to have it on mine. it looks good.

 

they using spacer on their suspension...but beware,cornering will be affected though...but cosmetic purpose it looks GOOD!!

[starr]

spacer? ouh ok.where to install? and hw much will it cost?

[nesquik]

auntie should haf...tink around 20 bux....got mine at JB for onl 7SGD

[loyjwe]

u just go bike shop get a voltmeter mounting....and drill a hole in ya headlight there n get it mounted can already bro

 

i went bikeshop but they onli help mi put double sided tape n cable tie. drill headlight where? from headlight there can be seen meh? was thinking of where can i get some kind of bracket or wat like how iu unit is placed.

[dragonforce]

bracket like IU? maybe can ask sengkwang to fabricate for you? going to be quite ex though.. just a suggestion for you to think about.. my voltmeter is the round type, just placed behind the meters secured using metal bends.. anybody's voltmeter is placed there but used something more secure? cos mine is shaking..

[loyjwe]

where u got ur metal bends? coz mine onli doeble side tape n cable tie. lagi worst. thought of placing there where other riders recommended b4 but think mine is rectangle shape hard to place there ley. where is sengkwang located n its contact any1 have?

[dragonforce]

mine was installed by bikeshop.. metal bends can get from hardware shops..

rectangle ones normally pple put at the handlebar.

seng kwang address:

SENG KWANG METAL INDUSTRIAL CO.

10 ANG MO KIO IND PK 2A #05-31 Singapore 568047

 

do a search bro.. be it google or search function.. it takes less than a min to find the answer.. i just copied and paste from another thread i searched through google.. cheers! do update us if you go there and get a quotation from them.. i believe pple here will be interested as well.

[loyjwe]

mine was installed by bikeshop.. metal bends can get from hardware shops..

rectangle ones normally pple put at the handlebar.

seng kwang address:

SENG KWANG METAL INDUSTRIAL CO.

10 ANG MO KIO IND PK 2A #05-31 Singapore 568047

 

do a search bro.. be it google or search function.. it takes less than a min to find the answer.. i just copied and paste from another thread i searched through google.. cheers! do update us if you go there and get a quotation from them.. i believe pple here will be interested as well.

 

sure bro thanks so much will see the quotation worth it anot. thanks

[9up]

Hi fellow S4 riders.

 

http://www.singaporebikes.com/forums/showthread.php?p=4902160#post4902160

 

Puig street screen for sale.

[Revouis]

where u got ur metal bends? coz mine onli doeble side tape n cable tie. lagi worst. thought of placing there where other riders recommended b4 but think mine is rectangle shape hard to place there ley. where is sengkwang located n its contact any1 have?

 

 

u buy theholder den drill in between the meter really cannot be seen look nciest it can be liao serious

[loyjwe]

buy the holder from seng kwang issit u mean?