[Group] Singapore BAJAJ Team (SBT)

[Mrace]

seeing u guys like having so much trouble changing the sprocket.. =.="

 

i saw that the latest UG3 version has the sprocket size at 43, as per nemesis advice is to change to 37 teeth.. but then some of u mentioned UM only has 38 n nothing smaller than that right?

 

If like that then how.. Nemesis!!!

 

Cuz mine is less than a mth old.. if change whole set.. hmm..

[kano]

maxiuma also have 20w50 wans.. semi syn.. quite hard to find.. but are available at mah motorshop(opp sim lim tower) few mth ago was $15 le.. nw i don knw.

 

 

I think mustafa have le i saw at the DIY section.

[firefox87]

so m i the only one eligible to change it at UM? Cuz mine is UG3 latest version? I saw a red pulsar parkin at my plc CP here.. but nvr seen the owner before.. hmm..

where u stay? my bike have been to more than 100 carparks i believe.

I think mustafa have le i saw at the DIY section.

 

where?? got ah? that time i go, only find car engine oil and stuffs.

[firefox87]

btw, any of us going NBW as an SBT convoy?

[Mrace]

where u stay? my bike have been to more than 100 carparks i believe.

 

 

where?? got ah? that time i go, only find car engine oil and stuffs.

 

cannot be u.. haha. cuz the pulsar is here everynite.. he/she must stay ard here..

 

me stay in woodlands..

[Mrace]

btw, any of us going NBW as an SBT convoy?

 

no ppl org.. n i m not going for the convoy.. i scare ppl claim me..

[Nemesis]

seeing u guys like having so much trouble changing the sprocket.. =.="

 

i saw that the latest UG3 version has the sprocket size at 43, as per nemesis advice is to change to 37 teeth.. but then some of u mentioned UM only has 38 n nothing smaller than that right?

 

If like that then how.. Nemesis!!!

 

Cuz mine is less than a mth old.. if change whole set.. hmm..

 

38 or 37 is sort of no difference lar....

 

you dun gave to change the whole set... just the rear sprocket will do..

[Nemesis]

no ppl org.. n i m not going for the convoy.. i scare ppl claim me..

 

btw, any of us going NBW as an SBT convoy?

 

there will be a convey for NBW for puslar...

 

I will be attending the briefing first... than i will post it up here...

 

Regards

Nemesis

[warhorse6901]

btw, any of us going NBW as an SBT convoy?

 

 

So what's this NBW??

[MERCENARY]

maxiuma also have 20w50 wans.. semi syn.. quite hard to find.. but are available at mah motorshop(opp sim lim tower) few mth ago was $15 le.. nw i don knw.

 

FYI racewerks at alexandra have them.

[GoofRider]

FYI racewerks at alexandra have them.

 

interesting.. might wanna try but way too far at the west side..

[proradar1]

So what's this NBW??

 

http://i231.photobucket.com/albums/ee289/SingaporeBikes/Events/NBW2008/NationalBikeWeekLogosportmixbignew.jpg

http://www.singaporebikes.com/forums/showthread.php?t=206377

[firefox87]

cannot be u.. haha. cuz the pulsar is here everynite.. he/she must stay ard here..

 

me stay in woodlands..

 

i also stay wdls..

 

there will be a convey for NBW for puslar...

 

I will be attending the briefing first... than i will post it up here...

 

Regards

Nemesis

 

cool.. update us soon.

 

So what's this NBW??

national biker's weekend. cool sh*t! like wanna apply leave go there.

 

FYI racewerks at alexandra have them.

 

hmm.. wanna try perhaps. anyone with me? then we DIY change engine oil.

[lindavw]

Originally Posted by Nemesis

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

Date : T.O.C

 

Time : T.O. C

 

Locaion: T.O.C

 

As there is a growing number of new member, It time for a next DIY session for hazard. Hazard is a essential thing we need on the road. the wiring is simple and yet doesn't void the warranty of the bike as no orignal cable is being touched.

 

For our beloved Pulsar, Hazard light that common done by other workshop, need to on the switch followed by signal light inorder to activate the hazard light. which is not ideal in any way. The one that we'll be installing is direct. Hazard light can be activate thru only one switch.

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

1)firefox87 - 82224092 but provided im free on that day.

2)pokvin - 90211432 i'd like to try the cruise control too? (:

3)kano - 90705564

4)wavy - 96271027 got sharing on DIY rear Givi box brake lights?

5)warhorse6901 - 98443811

6)flying fox - 97615916

7)proradar1 - 98300770 hope u all don mind a total noob

8)Goof - 98577319 (not confirm)

9)Jaffa - 97821440 ( depend on date)

10)Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

 

 

Please state the version of ur bikes. P180UG3 or UG2 or P200.

The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

[kano]

 

where?? got ah? that time i go, only find car engine oil and stuffs.

 

Got la bro.

[mjbs64]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

1)firefox87 - 82224092 but provided im free on that day.

2)pokvin - 90211432 i'd like to try the cruise control too? (:

3)kano - 90705564

4)wavy - 96271027 got sharing on DIY rear Givi box brake lights?

5)warhorse6901 - 98443811

6)flying fox - 97615916

7)proradar1 - 98300770 hope u all don mind a total noob

8)Goof - 98577319 (not confirm)

9)mjbs64 - 97821440 ( depend on date) / P200

10)Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

 

 

Please state the version of ur bikes. P180UG3 or UG2 or P200.

The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

[apit87]

Originally Posted by Nemesis

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

Date : T.O.C

 

Time : T.O. C

 

Locaion: T.O.C

 

As there is a growing number of new member, It time for a next DIY session for hazard. Hazard is a essential thing we need on the road. the wiring is simple and yet doesn't void the warranty of the bike as no orignal cable is being touched.

 

For our beloved Pulsar, Hazard light that common done by other workshop, need to on the switch followed by signal light inorder to activate the hazard light. which is not ideal in any way. The one that we'll be installing is direct. Hazard light can be activate thru only one switch.

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

1)firefox87 - 82224092 but provided im free on that day.

2)pokvin - 90211432 i'd like to try the cruise control too? (:

3)kano - 90705564

4)wavy - 96271027 got sharing on DIY rear Givi box brake lights?

5)warhorse6901 - 98443811

6)flying fox - 97615916

7)proradar1 - 98300770 hope u all don mind a total noob

8)Goof - 98577319 (not confirm)

9)Jaffa - 97821440 ( depend on date)

10)Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

 

 

Please state the version of ur bikes. P180UG3 or UG2 or P200.

The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

..........

[breadman]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

1)firefox87 - 82224092 but provided im free on that day.

2)pokvin - 90211432 / P200 i'd like to try the cruise control too? (:

3)kano - 90705564

4)wavy - 9627-one-027 / P200

5)warhorse6901 - 98443811

6)flying fox - 97615916

7)proradar1 - 98300770 hope u all don mind a total noob

8)Goof - 98577319 (not confirm)

9)mjbs64 - 97821440 ( depend on date) / P200

10)Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

 

 

 

Please state the version of ur bikes. P180UG3 or UG2 or P200.

The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

[firefox87]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

2)pokvin - 90211432 / P200 i'd like to try the cruise control too? (:

3)kano - 90705564

4)wavy - 9627-one-027 / P200

5)warhorse6901 - 98443811

6)flying fox - 97615916

7)proradar1 - 98300770 hope u all don mind a total noob

8)Goof - 98577319 (not confirm)

9)mjbs64 - 97821440 ( depend on date) / P200

10)Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

 

 

 

Please state the version of ur bikes. P180UG3 or UG2 or P200.

The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

[Flying Fox]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

1)firefox87 - 82224092 but provided im free on that day.

2)pokvin - 90211432 / P200 i'd like to try the cruise control too? (:

3)kano - 90705564

4)wavy - 9627-one-027 / P200

5)warhorse6901 - 98443811

6)flying fox - 97615916 /P200

7)proradar1 - 98300770 hope u all don mind a total noob

8)Goof - 98577319 (not confirm)

9)mjbs64 - 97821440 ( depend on date) / P200

10)Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

 

 

 

Please state the version of ur bikes. P180UG3 or UG2 or P200.

The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

[Flying Fox]

Well i don't find any different for us to put which area we stay at? east? west? north? why can't we just put the place we stay.. i believe our bruders and sistas here find it useful, in term of meeting up or asking for nearby help.

so let me get the ball rolling. put your location in CAPITAL letters.

for those not comfortable revealing where 'exactly' they stay, can just leave it as it is.

 

 

GUys.... Enuff with those spec and review...

 

Let talk about real thing now.... Before anythin serious planning is to be done. CAN we have a count of strength here ?

 

Irregardless if u are a ex bajaj owner, active or not active in this thread. Kindly please put ur nick and location below.

 

Those who is not in register with the forum, you can drop us a email at [email protected]

 

For those existing member, please drop us a mail and state ur nick (if have), contact number, name and location...

 

Strength Count

1) Nemesis / East

2) Lindavw / East

3) Roadrunner71 / West

4) Goofrider / SENGKANG (soon to be Pasir Ris early next year)

5) FaveTp / East

5) NiteHawk / East (Ex)

6) ApeKinz / East

7) asri_pulsar180 / West (Ex)

8) Azzy / West

9) PulsarBee / East

10) Kang / East

11) Kumar / East Central

12) Paul / East

13) Martell1981 / North

14) Sham / ? (Ex)

15) Solar / Jurong (close to Jurong CC)

16) Suvespa / West

17) Totalpet / TOA PAYOH

18) Yani / West

19) yz1983 / West (Ex)

20) weicong / West

21) spai_duhz / West

22) ruriimasu / West

23) VVJ / West

24) seroja / West

25) joajas / West

26) Flooz / North

27) Lanzer / North

28) blueyeagle / WOODLANDS (Near 888 Plaza)

29) WaaDee / west

30) Sbiker / North

31) louie

32) Norrachan

33) warhorse6901/ TAMPINES St 71

34) SC Gaban/ Northern Hemisphere (MARSILING DRIVE)

35) Wavy / West

36) firefox/ WOODLANDS (near admiralty mrt, Blk 68*)

37) MyWord / East

38) proradar1 / PUNGGOL ( jus came from pasir ris haha)

39) mjbs64 / TAMAN JURONG

40) marcsuper4 / YISHUN

41) weswes / BUANGKOK

42) silverboi / WOODLANDS (beside admiralty MRT)

43) petrified / ANG MO KIO

44) flying fox / Punggol

[Mrace]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

Note: Please state the version of ur bikes. P180UG3 or UG2 or P200.

*** The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

 

1) firefox87 - 82224092 but provided im free on that day.

2) pokvin - 90211432 / P200 i'd like to try the cruise control too? (:

3) kano - 90705564

4) wavy - 9627-one-027 / P200

5) warhorse6901 - 98443811

6) flying fox - 97615916 /P200

7) proradar1 - 98300770 hope u all don mind a total noob

8) Goof - 98577319 (not confirm)

9) mjbs64 - 97821440 ( depend on date) / P200

10) Petrified - 93829410 (depends on if i get my pulsar by the time) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

14) M|rac|e - P180 UG3 (3.dun knw wat )

 

 

P.S: When Quoting pls remove the infront n behind the post to keep the colours n format for easy reading. Thank you!

[Mrace]

i also stay wdls..

 

 

 

cool.. update us soon.

 

 

national biker's weekend. cool sh*t! like wanna apply leave go there.

 

 

 

hmm.. wanna try perhaps. anyone with me? then we DIY change engine oil.

 

When u all want to go Racewerks? I should be going UM to change the sprocket maybe on Tues / Wed after i check the stock.

[Petrified]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

Note: Please state the version of ur bikes. P180UG3 or UG2 or P200.

*** The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

 

1) firefox87 - 82224092 but provided im free on that day.

2) pokvin - 90211432 / P200 i'd like to try the cruise control too? (:

3) kano - 90705564

4) wavy - 9627-one-027 / P200

5) warhorse6901 - 98443811

6) flying fox - 97615916 /P200

7) proradar1 - 98300770 hope u all don mind a total noob

8) Goof - 98577319 (not confirm)

9) mjbs64 - 97821440 ( depend on date) / P200

10) Petrified - 93829410 (P180 UG2 with killswitch) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

14) M|rac|e - P180 UG3 (3.dun knw wat )

[GoofRider]

Singapore Bajaj Team DIY Session (Hazard Light)

 

 

We need to know how many member want to fix this hazard light inorder to confirm the date and location. Also, our R&D need to go for purchase the part needed. P180 and P200 is welcome.

 

This is a non-profit DIY session. The aim is to equip our pulsar to have a better safety equipment when on the road.

 

KINDY PLEASE LIST UR NAME BELOW AND UR CONTACT NUMBER (or PM )

 

Note: Please state the version of ur bikes. P180UG3 or UG2 or P200.

*** The setup and wiring is diff for each model so our organiser nemesis can buy the needed parts.

 

1) firefox87 - 82224092 but provided im free on that day.

2) pokvin - 90211432 / P200 i'd like to try the cruise control too? (:

3) kano - 90705564

4) wavy - 9627-one-027 / P200

5) warhorse6901 - 98443811

6) flying fox - 97615916 /P200

7) proradar1 - 98300770 hope u all don mind a total noob

8) Goof - 98577319 (not confirm) / UG2

9) mjbs64 - 97821440 ( depend on date) / P200

10) Petrified - 93829410 (P180 UG2 with killswitch) (=

11) myword (Depend on date)

12) SC Gaban

13) apit87 - 92771575 (ug2).. very interested.

14) M|rac|e - P180 UG3 (3.dun knw wat )