[Group] Singapore BAJAJ Team (SBT)

[arthur_chan]

juz a ques.. anyone knows whr to buy protective film for stickers?

 

protective sticker or reflective sticker? n where u wana paste?

 

i know the biggest home fix i saw is at vivo, b1, drop by there if u can't find. ^^

[arthur_chan]

Sinnob PO update .....

 

please note for those P180 ... you need to remove the stock chain guard and have to get P200 chain guard. Little modification needed to have it fit on your ride.

 

 

waa, i still love my stock chain guard. p200 where got chain guard?

[arthur_chan]

anyone has any idea if our bikes can use H4 12v/60/55W bulbs?

 

i think 40w n above will melt ur plastic. pulsar cowling is not made for heat resistant. i think i tried 40w for my pilot b4, during testing time, i burnt my hand n it melted my bag's plastic.

[arthur_chan]

I always go to Mustapha. I don't know about TWD, but for all the currencies I've changed there, may it be US/euro or local currencies (Indo ringgit, MYR, THB etc..), they've always served me with a better rate than other money changers and when i compare with friends traveling with me who changed their money elksewhere, I always have the better rate .

So now, I just stick with them, they're open 24/7 so you can go change there last minute the night before your trip, and they are very transparent and consistent in their rates.

 

iirc, the best rate is in raffles, but they only operate in office hrs. or u could try chinatown, there's 1 particular shop that always long Q. orchard also got good rates, but u need to find which shop offer best but the shops r not closely pack together. good luck. ^^

[glzco]

protective sticker or reflective sticker? n where u wana paste?

 

i know the biggest home fix i saw is at vivo, b1, drop by there if u can't find. ^^

 

protective film sticker.. like AR race protection lidat one.. nvm la.. later i go jalan jalan take a look ard jurong point.. nearer.. if not, i'll head down to vivo mayb tml or wt..

 

waa, i still love my stock chain guard. p200 where got chain guard?

 

p200 got one chain guard which is metal and lie just above the chain only.. ha..

 

i think 40w n above will melt ur plastic. pulsar cowling is not made for heat resistant. i think i tried 40w for my pilot b4, during testing time, i burnt my hand n it melted my bag's plastic.

 

our electronics is designed for 35W.. so usually buy 35W type bulbs..

 

actually if nv put oso can

but if u happen to find the film tell me also

haha

 

nv put of cuz can.. but i realise the chrome sticker abit thin.. the adhesion not very good either lehz.. so nid to find some protection for them.. ha..

 

all in all, if homefix dun sell any protective film stickers.. i might head down to bicycle shops or motor shops to buy the AR race protection stickers instead and DIY.. will update as and when.. ha..

[ORen]

its not customized by the rider

it is the pest control/sanitisation company's bike

this is the sanitisation side one

they also have riders on pulsar for the pest control side

if you notice can see alot of them on the road

 

Whether customized by a company or a rider, it;s still a customized Pulsar meaning not a stock one I never saw the pest control ones, but this one made me smile because I see their logo everyday at work when I go to the ladies :p:p

 

i think 40w n above will melt ur plastic. pulsar cowling is not made for heat resistant. i think i tried 40w for my pilot b4, during testing time, i burnt my hand n it melted my bag's plastic.

 

I've read that if you change the coil plate, to an Avenger 180 one, you can put a stronger bulb, up to 60W ! And without melting anything. That's why I asked the question some pages ago, but everyone totally ignored me :nono::nono:

So if anyone here knows what a coil plate does, how it affects the rest of the electronical set up of a Pulsar to change it's coil plate, I'd be happy to learn more

[ORen]

did dis "thai writings" has 3 flags, sg, malsyia thailand on it? and bike sratches here and there?

 

I can't remember now, but it's yours for sure, I asked if it was an engine haul, the mech shook his head and said "Engine broke already" lol

[kiraguyver84]

protective film sticker.. like AR race protection lidat one.. nvm la.. later i go jalan jalan take a look ard jurong point.. nearer.. if not, i'll head down to vivo mayb tml or wt..

 

 

 

p200 got one chain guard which is metal and lie just above the chain only.. ha..

 

 

our electronics is designed for 35W.. so usually buy 35W type bulbs..

 

 

 

nv put of cuz can.. but i realise the chrome sticker abit thin.. the adhesion not very good either lehz.. so nid to find some protection for them.. ha..

 

all in all, if homefix dun sell any protective film stickers.. i might head down to bicycle shops or motor shops to buy the AR race protection stickers instead and DIY.. will update as and when.. ha..

 

Wow.. Had the same thought too for protecting my stickers, we could see who are interested and get a roll(to divide to the cost. As I have done Race Shield b4, and it's awesome but pocket burn hole.

 

The places I did was the Tank side, one seated cover, head light and front Mud Guard cost almost $400. That was for my previous ride.

 

So see whose interested we can do a let's say a MO for it, depending on the price of the roll if too ex too than we discuss other alternative.

[ORen]

Just sharing a few things I saw on the road these days:

 

- a motorbike u-turning on red light, to take advantage of all traffic stopped at the junction, to not have to wait for oncoming traffic to clear the junction or for the green arrow.

 

- a motorbike arrived at the stop line on the left lane when the rider wanted to turn right. Not a problem, he rode his bike straight along the stop line, placing himself in front of the right lane's first car, perpendicular to the lane, ready to move off to turn right. (The first thing that came to my mind when I saw that is "Allllamaaaaak!")

 

- A scrambler was playing Sonic on the express way, jumping from lane to lane, dancing around cars at 90km/h+. The rider was carrying a pillion, who was wearing flip flops, a tank top and shorts. I imagined how playful he would feel if he crashes and his pillionette ends up like she just had a sandpaper massage....

 

- An uncle on a phantom decided to cross Jln Bukit Merah from side to side, while traffic was coming towards him and all lights green. All that to stop at the other side of the avenue to get something from the 7/11.

 

I'm not a good rider yet and I am still learning many things, but when I see other riders do stupid stuff on the road, I think about how road users perceive us and how it's up to each and everyone of us to show them that bikers can be responsible, safe and respectful of rules and others on the road !

 

So please, from time to time, let's think about how we ride, and what we can do to improve our riding, and be safer for us and for the others, because it's often too late that we finally learn our lesson...

[ORen]

Wow.. Had the same thought too for protecting my stickers, we could see who are interested and get a roll(to divide to the cost. As I have done Race Shield b4, and it's awesome but pocket burn hole.

 

The places I did was the Tank side, one seated cover, head light and front Mud Guard cost almost $400. That was for my previous ride.

 

So see whose interested we can do a let's say a MO for it, depending on the price of the roll if too ex too than we discuss other alternative.

 

Why would you want to protect your stickers ? Is it from scratches ? Or UV/Rain so the colors don't fade ? Sorry for the silly question, but I'm thinking if something scratches the bike so bad the sticker is peeled, protective film isn't going to do much - but then again, I know nothing so please enlighten me

 

And if the sticker is small is it worth it ? It would make sense if you cover the whole bike with a sticker design, but not small sticker, would it ?

[kiraguyver84]

Why would you want to protect your stickers ? Is it from scratches ? Or UV/Rain so the colors don't fade ? Sorry for the silly question, but I'm thinking if something scratches the bike so bad the sticker is peeled, protective film isn't going to do much - but then again, I know nothing so please enlighten me

 

And if the sticker is small is it worth it ? It would make sense if you cover the whole bike with a sticker design, but not small sticker, would it ?

 

Good Qns, my stand would be that I do not need to maintain the stickers after placing the protective firm on it, cos stickers looses it's adhesion over time due to Weather changes.

 

Other than that we could protect our layer of beautiful paint we have on our Ride, cos when riding anywhere sand, rocks or even glass from accidents can shoot towards your ride and create scratches and dents. Race Shield could do some protection be not all.

 

 

O'ren Have u gotten ur Spark Earth?

Edited July 20, 2010 by kiraguyver84

[alvinyansg]

I always go to Mustapha. I don't know about TWD, but for all the currencies I've changed there, may it be US/euro or local currencies (Indo ringgit, MYR, THB etc..), they've always served me with a better rate than other money changers and when i compare with friends traveling with me who changed their money elksewhere, I always have the better rate .

So now, I just stick with them, they're open 24/7 so you can go change there last minute the night before your trip, and they are very transparent and consistent in their rates.

 

i think i will head to change alley n china town to check out 1st...rates from mustafa can be checked online...

[ORen]

 

O'ren Have u gotten ur Spark Earth?

No not yet, didn't have the time to go there - I need to first call the shop see if they have any left in stock, don;t want to go for nothing. Maybe I'll go tomorrow at lunch. I also need iridium spark plugs and I need to wrap my head around the sprocket size thing, to decide if I want to change my sprocket size and tires or not, before I buy the sinnob.. :confused:

 

Protection of the paint by a film makes sense, but is this film easy to maintain ? Or is it itself going to unstick itself and peel off after time...

 

i think i will head to change alley n china town to check out 1st...rates from mustafa can be checked online...

I'm not sure they update the rates in real time online. But if you want I'll go check for you, it's 2min from my place.

[glzco]

Whether customized by a company or a rider, it;s still a customized Pulsar meaning not a stock one I never saw the pest control ones, but this one made me smile because I see their logo everyday at work when I go to the ladies :p:p

 

 

 

I've read that if you change the coil plate, to an Avenger 180 one, you can put a stronger bulb, up to 60W ! And without melting anything. That's why I asked the question some pages ago, but everyone totally ignored me :nono::nono:

So if anyone here knows what a coil plate does, how it affects the rest of the electronical set up of a Pulsar to change it's coil plate, I'd be happy to learn more

 

what he meant by melting was the reflector we have in the headlight casing.. too high powered, the heat from the bulb will melt your headlight reflector.. i seen it in his case.. quite bad.. not melting other stuff.. no doubt we can put a stronger bulb but our reflector not meant for such usage.. unless we can change the reflector..

 

Wow.. Had the same thought too for protecting my stickers, we could see who are interested and get a roll(to divide to the cost. As I have done Race Shield b4, and it's awesome but pocket burn hole.

 

The places I did was the Tank side, one seated cover, head light and front Mud Guard cost almost $400. That was for my previous ride.

 

So see whose interested we can do a let's say a MO for it, depending on the price of the roll if too ex too than we discuss other alternative.

 

wow.. reali quite expensive huh.. its still drizzling now.. boring.. wan go out but dun wana go out in the rain though..mayb tml or wt la.. the design i tryin to do very hard~~~ and i'm quite reluctant to paste anitin for nw due to the weather.. ha..

 

Just sharing a few things I saw on the road these days:

 

- a motorbike u-turning on red light, to take advantage of all traffic stopped at the junction, to not have to wait for oncoming traffic to clear the junction or for the green arrow.

 

- a motorbike arrived at the stop line on the left lane when the rider wanted to turn right. Not a problem, he rode his bike straight along the stop line, placing himself in front of the right lane's first car, perpendicular to the lane, ready to move off to turn right. (The first thing that came to my mind when I saw that is "Allllamaaaaak!")

 

- A scrambler was playing Sonic on the express way, jumping from lane to lane, dancing around cars at 90km/h+. The rider was carrying a pillion, who was wearing flip flops, a tank top and shorts. I imagined how playful he would feel if he crashes and his pillionette ends up like she just had a sandpaper massage....

 

- An uncle on a phantom decided to cross Jln Bukit Merah from side to side, while traffic was coming towards him and all lights green. All that to stop at the other side of the avenue to get something from the 7/11.

 

I'm not a good rider yet and I am still learning many things, but when I see other riders do stupid stuff on the road, I think about how road users perceive us and how it's up to each and everyone of us to show them that bikers can be responsible, safe and respectful of rules and others on the road !

 

So please, from time to time, let's think about how we ride, and what we can do to improve our riding, and be safer for us and for the others, because it's often too late that we finally learn our lesson...

 

i second your thoughts o'ren..

 

No not yet, didn't have the time to go there - I need to first call the shop see if they have any left in stock, don;t want to go for nothing. Maybe I'll go tomorrow at lunch. I also need iridium spark plugs and I need to wrap my head around the sprocket size thing, to decide if I want to change my sprocket size and tires or not, before I buy the sinnob.. :confused:

 

Protection of the paint by a film makes sense, but is this film easy to maintain ? Or is it itself going to unstick itself and peel off after time...

 

 

I'm not sure they update the rates in real time online. But if you want I'll go check for you, it's 2min from my place.

 

for sprocket size.. i'm sure mj told me they only offer the sprocket size in the stocks sizes if i'm not wrong.. so if you haven changed anitin yet, the sprocket size from sinnob shld be your stock size.. referring to cookie, his sprocs and gears was used for about 24K km before changing.. so... you can keep it first.. no harm.. ha..

[kiraguyver84]

No not yet, didn't have the time to go there - I need to first call the shop see if they have any left in stock, don;t want to go for nothing. Maybe I'll go tomorrow at lunch. I also need iridium spark plugs and I need to wrap my head around the sprocket size thing, to decide if I want to change my sprocket size and tires or not, before I buy the sinnob.. :confused:

 

Protection of the paint by a film makes sense, but is this film easy to maintain ? Or is it itself going to unstick itself and peel off after time...

 

 

I'm not sure they update the rates in real time online. But if you want I'll go check for you, it's 2min from my place.

 

Pretty difficult to come off, tried pulling before. Hmmm... Oic, ppl over there nice one, can ask them to lend u some tools to install or bring ur own ones. It's plug and play thingy.

 

Just to share I have place few other stuff together with e Spark Earth, it's a combination of other accessories, like Earth ignition wires to aid in ur combustion. Another Alternative of Nology Hot Wires. Good luck in shopping for ur Spark Earth tomorrow.

[glzco]

anyone wana get the race shield tgt? we can all buy more tgt.. they might charge cheaper.. i dunoe wad is the market rates for now.. or wad.. i called one shop and they quoted me $8.42 for a 1inch by 24 inch sheet.. anyone got anymore ideas?

[kiraguyver84]

More information for Earth Iginition:http://pivotjp.com/product/flame-ignitionearth-e.html

 

The product is more for pick up, which I have tested and it's proven can meet up to let u try my ride, but please be gentle with Red Wolf . Brother MJ and HVC tired my bike this morning. After installing these accessories my Red Wolf felt like a Class 2A's pick up, smooth and effective.

 

 

Other Forum and the maker from Japan claim the it will also save fuel and enhance your electrical when in use of both Spark Earth and Iginition Earth Cable.

 

http://pivotjp.com/product/flame-raizin-e.html

 

Will update this forum when I refill my tank to see any improvement, my riding style this few tank fill up gives me only 33km to max 35km/l. That's about it for now.

[Orleng]

hullo hullo everybody. for those who have been keeping track of the speedo colour change thread. it's actually me!

 

anyway to update the interested pulsarians, I've cracked open the meter of a digital one and have discovered that the electoronics involved are hugely different from that used on Jap bikes. It's been the same so far for the R15(made in india), gilera runner(suspected parts made in india).

 

While I won't say that it's impossible to be done, it is going to take quite a long time to reverse engineer the circuitry. On a timescale of weeks. Also, the components will be more costly as compared to the ones used on Jap bikes. I've emailed a supplier and as yet have confirmed that he *may* be able to make a production run on white/blue, but other colours are not available.

 

I'll let ya'll know here as and when the project is completed.

 

ride safe ya'll!

[glzco]

woootsss~~~~ orleng~~~~ its you doing the ting ar!!!! iyo~~~~~ good ar.. update us k..... i'm eagerly awaiting your reply~~~~ ha.... =P

[kiraguyver84]

Hi Guys,

 

An update of the items that are still on sales:

 

Bajaj Pulsa 200cc accessories-

 

1) 2 sets Signal lights going for $8 per Piece- 1 set left

2) Darn heavy balancer both for $15 - Sold

3) Grips Both for $8 - Sold

4) Side mirrors with blind spot mirror both for $28 - Sold

5) Break and clutch going for $50 - Soon to Be Sold

6) Handle Bar $40

7) Head Lights three of them for $18 - Sold

 

Shock Damper for Class 2B and 2A, eg Bajaj Pulsa 200cc and Honda Super 4

 

8)Gazi shock damper going on sales, brought what I was looking for so selling this Shock damper.

Brought it for $290 selling $250, no scratches and leaks. View to believe and double check at Unique for more information. - Sold

Edited July 20, 2010 by kiraguyver84

[kiraguyver84]

woootsss~~~~ orleng~~~~ its you doing the ting ar!!!! iyo~~~~~ good ar.. update us k..... i'm eagerly awaiting your reply~~~~ ha.... =P

 

Yeah, he's e guy who brought over my Suzuki GSR 400cc.

Edited July 20, 2010 by kiraguyver84

[glzco]

waaaa~~~~~ wad a small world this reali is la~~~~~

[alvinyansg]

I'm not sure they update the rates in real time online. But if you want I'll go check for you' date=' it's 2min from my place.[/quote']

 

they dun refresh real time

but the online rates are already quite a good indicator of the rates they offering

 

 

No not yet' date=' didn't have the time to go there - I need to first call the shop see if they have any left in stock, don;t want to go for nothing. Maybe I'll go tomorrow at lunch. I also need iridium spark plugs and I need to wrap my head around the sprocket size thing, to decide if I want to change my sprocket size and tires or not, before I buy the sinnob.. :confused:[/quote']

 

for sprocket size.. i'm sure mj told me they only offer the sprocket size in the stocks sizes if i'm not wrong.. so if you haven changed anitin yet, the sprocket size from sinnob shld be your stock size.. referring to cookie, his sprocs and gears was used for about 24K km before changing.. so... you can keep it first.. no harm.. ha..

 

 

while considering if i should go for sinnob

i read through some of the older posts on sinnob

and MJ did say that for P200 there is only 1 size for the sprocs

while for P180 we can have the different sizes cos P180 is more popular in indo...

[HVC]

waaaa~~~~~ wad a small world this reali is la~~~~~

 

yes..seafood seafood ...seafood seafood ..seafood seafood

[alvinyansg]

finally done with my reflective stickers on my side boxes

 

here are the pics

wonder if i should put reflective tape at the cover of my side boxes like in the 1st 2 pics:confused:

i took the tapes out in the last few pics