Troubleshoot ur Super4!

[duckit]

RPM increases but Speed didnt increase

[cashwong]

OKie, my speed was at 80km/hr at 5k rpm. Every morning during warming up phase, i will always hear the "grinding" sound from my right side of the engine whenever i clutch in. But when i straighten up my bike and clutch in, the "grinding" sound will soften (as in not as loud as before) and the sound will disappear when i engage 1st gear. So just wanna ask do i have a clutch plates/housing problem?

[Monster84]

Hi all..

 

My vtec 2 cant seem to go more than 100kmph at gear 6 / 7rpm..

I i open throttle more..it will jerk like mad..as if its coughing..somewad like asthma..

but all other gears VTEC can open and is able to achieve

 

 

any bro can help me pls?

[ABOY9999]

Hi all..

 

My vtec 2 cant seem to go more than 100kmph at gear 6 / 7rpm..

I i open throttle more..it will jerk like mad..as if its coughing..somewad like asthma..

but all other gears VTEC can open and is able to achieve

 

 

any bro can help me pls?

 

i think there is something blocking better bring to motor tiam for sev before more part are affected

[eement]

i would like to ask if my signal light have some problem....

 

my left side signal does not light up only when signalling den light up

 

for like normal pole light only the right side got light

 

any1 noe wat the problem lies?

[Monster84]

i think there is something blocking better bring to motor tiam for sev before more part are affected

 

 

ohhh man...thankz bro.. does it sound like an expensive prob?

[biting_point]

i would like to ask if my signal light have some problem....

 

my left side signal does not light up only when signalling den light up

 

for like normal pole light only the right side got light

 

any1 noe wat the problem lies?

 

change bulb?? try LAB for the bulb..

[aikau]

Hello!

 

anyone can tell if version S leaking coolant on both side of block

is there any other way to rectify it other than save up and get a block(1nd or first hand)

 

and if anyone know of anyshop with 2nd hand block lobang!do tell me =)

thanks alot

[asswipe]

...........

[skateboy]

u can check at another bike shop to c if its true... then decide to live with it or get another bike...

[Monster84]

i think there is something blocking better bring to motor tiam for sev before more part are affected

 

 

 

thankz bro..went to planet motors at ubi..Mech said its the air filter spoil..

Changed to K&N.. =)

[SMR]

After that he opened my carb, blew every hole with the air hose and spotted something, a line inside my carb. (2 lines at the yellow part of the carb, something like a yellow flap, i dunno wad's the name of the part).

 

So he said there's a small hole but it's not visible to me. I dunno whether he's trying to be professional and find a mistake to answer the problem or wad. So he says if i really want to 'cure' the problem, i'll have to change my entire carb that costs $2k+!!

 

Do you have any picture of it?

A picture speaks a thousand words...

[SMR]

Maybe this should help you identify...

[ABOY9999]

thankz bro..went to planet motors at ubi..Mech said its the air filter spoil..

Changed to K&N.. =)

 

welcome bro as long as your bike are working well now

[ABOY9999]

and now my problem why my bike cant backfire lolz 4000rpm nth 5000rmp nth 6000rpm nth 7000rpm still nth who know about it

[asswipe]

..........

[YAD]

need help fr bros here.. me riding PB1..recently i could here knocking sound

 

evry time i brake n drop gear.. not sure whether its fr de rear brake, chain or

 

gear/sprocket

[valente19]

hi guys, need help here..

my ver S seat couldn't be fit back.. although there's a click sound when i press it down hard, i could still remove the seat with a lift.. i checked the the 'lock' using a screwdriver to press it down, it's working fine, what could be the problem?

thanks~

[SMR]

hi guys, need help here..

my ver S seat couldn't be fit back.. although there's a click sound when i press it down hard, i could still remove the seat with a lift.. i checked the the 'lock' using a screwdriver to press it down, it's working fine, what could be the problem?

thanks~

 

Do you have many stuff underneath your seat? Maybe you have too many stuff underneath the seat and therefore it's harder to close back.

Try removing those stuff and close. If still it doesn't work, spray some WD40 at the catch. If still doesn't work, you might need to change the lock.

[valente19]

thanks for the fast reply, i took everything underneath out, still.....

i suspect it's the seat problem.. the lock seems ok..

anywhere i can go to find help?

thanks!!!

[ABOY9999]

thanks for the fast reply, i took everything underneath out, still.....

i suspect it's the seat problem.. the lock seems ok..

anywhere i can go to find help?

thanks!!!

 

tey to find find some one with the same bike with you and exchange the seat to try and see what seem to be the problem if the seat can lock mean your seat is spoit and is time to change a new seat

[duckit]

hi guys, need help here..

my ver S seat couldn't be fit back.. although there's a click sound when i press it down hard, i could still remove the seat with a lift.. i checked the the 'lock' using a screwdriver to press it down, it's working fine, what could be the problem?

thanks~

 

Try using some WD40 or lubricant you can find. Spray some at the Key hole and the lock part and the hook that has contact with the seat . Hope it helps.

[duckit]

Hey guys , orginal front signal light is plug and play thing or need strip the wires to connect to the socket thing ? Anyone ?

[ZzGaNgStErzZ]

Hey guys , orginal front signal light is plug and play thing or need strip the wires to connect to the socket thing ? Anyone ?

 

wad u mean? u mean e bulbs izzit? if is e bulb plug in can liao.

[duckit]

hmm nope the bulb. i mean the signal light wire, if i would to change a new one, is it a socket to socket thing(plug and play) , or i have to strip the wires from the signal light to tap onto the main socket inside the headlight assembly. Thanks all.