Aprilia Riders

[khoa9876]

http://farm3.static.flickr.com/2235/2361407572_cef6d49ff1_o.jpg

here is one of our bikes

[quikslvr]

EDIT: sry i double post.

 

whos custom paintwork u wanna see? de vietnamese? they dont bring their bikes..

[ragnaphobia]

whos custom paintwork u wanna see? de vietnamese? they dont bring their bikes..

 

 

awwwww:cry:

[YoShiKi1605198827]

hello all can i join in?

 

Put ur name in Ethan . . . or u want me to put in for u . . . . u already miss the 1st 2 outing . . . make sure u don't miss this one . . . .

[khoa9876]

hi, there is our bikes which airbrush painting

http://xb0.xanga.com/f61c4a1260433188814800/w145163079.jpg

 

http://xab.xanga.com/849c940067434188814819/w145163096.jpg

 

http://xe8.xanga.com/4d6c9201c7035188814874/w145163147.jpg

 

Vietnamese painted. Many other samples will update for you, my friends

[tangmulong4488]

wow so nice:bounce:

[ethan_seahz]

hi, there is our bikes which airbrush painting

http://xb0.xanga.com/f61c4a1260433188814800/w145163079.jpg

 

http://xab.xanga.com/849c940067434188814819/w145163096.jpg

 

http://xe8.xanga.com/4d6c9201c7035188814874/w145163147.jpg

 

Vietnamese painted. Many other samples will update for you, my friends

 

woah! damn nice!

[ethan_seahz]

FOREIGN APRILIAN MEETUP NIGHT (OPERATION CHICKEN)

JUNE 27 2008

 

 

Event will be in Geylang area> 232 Geylang Road Lorong 10 Singapore 389292,

to chill out and kopi session with our foreign guests.

 

 

Timing to meet > 11:30 PM of june 27

Geylang Lorong 10 (2nd Line Mobile)

 

 

Anyone interested please add your name and your contract number(h/p)

 

 

1> Insaint (Patrick) 91911589

2> ~Yoshiki~ (Aaron) 90888586

3> yag (Aik Yong) 93662778 > Can help pick a good spot to park?

4> quikslvr (Mr Green) 81834404

5> ragnaphobia(Alfian) 93860643 > CONFIRM WILL GO. EAGER TO SEE THE CUSTOM PAINTWORK APRILIA

6> ethan_seahz (Ethan) 91540990

7>

8>

9>

10>

__________________

[ethan_seahz]

Put ur name in Ethan . . . or u want me to put in for u . . . . u already miss the 1st 2 outing . . . make sure u don't miss this one . . . .

 

haha okay put already.. thanks man. yah! wanna see more aprilias! mhm but i dono where to park man! i dont even know geylang well! i think i am gonna park some place, find you guys than shift my bike. lol damn lame can. lol.

[2Bpencil]

join la put ur name if ure riding aprilia

 

only aprilia?..

[2Bpencil]

yeah, my valve broke, i'm riding without a valve now, its gonna be the third time i've to change my valve this year.

 

is it due to too much carbon?..

[lacrimosae]

http://www.rotax.com/RotaxPublic/CMSResource.ashx/www.rotax.com/neutral/engine/2004/RS.122.22.KW/Thumbnails.jpg

 

Installing a kick starter will put an end to all your damp starter troubles.

 

Am shipping in a new 122 engine from Rotax without the starter motor but with a kick starter instead. Will cost around S$3,800 including shipping. Just requires registration with the authorities for the new engine case.

 

Those interested, PM me. We can share the cost of shipping.

 

Alternatively, you can order the kick starter set from Rotax to be retrofitted onto your bikes. This is relatively cheap and you wont find yourself push-starting your bike at a traffic light with angry motorists behind you again.

 

I am seldom in SG these days, so do be patient. It may take a while for me to check my PMs.

 

Cheers.

[khoa9876]

this bike (airbrush painting) has installed Polini 154cc, carb 34mm with Boyesen reed valve, tune something, front sprocket 17teeth, rear 40teeth, ECU de-restricted , top speed >180km/h (tested).

To maintenance your power valve, you should clean exhaust valve each 1000km and lubricate cable + valve body. Some our bike got big problems from this valve

[quikslvr]

this bike (airbrush painting) has installed Polini 154cc, carb 34mm with Boyesen reed valve, tune something, front sprocket 17teeth, rear 40teeth, ECU de-restricted , top speed >180km/h (tested).

To maintenance your power valve, you should clean exhaust valve each 1000km and lubricate cable + valve body. Some our bike got big problems from this valve

 

which flight u comin in from? im workin at the airport maybe i can organize a welcome commitee hehehe

[2Bpencil]

which flight u comin in from? im workin at the airport maybe i can organize a welcome commitee hehehe

 

and it'll take me around 5mins to reach airport..

[Sorrie4u]

how to know weather your valve is broken? the valve u toking abt is the high end 8k rpm power valve? how to noe it is broken? wad's the signs when riding it?

 

and thanks lacro...no budget for a whole engine though...thanks for the info...think i wan to use a mineral water bottle cut it into a cup like thingy and mount it to cover the starter motor...hope it will work...

[WawanAprilia]

FOREIGN APRILIAN MEETUP NIGHT (OPERATION CHICKEN)

JUNE 27 2008

 

 

Event will be in Geylang area> 232 Geylang Road Lorong 10 Singapore 389292,

to chill out and kopi session with our foreign guests.

 

 

Timing to meet > 11:30 PM of june 27

Geylang Lorong 10 (2nd Line Mobile)

 

 

Anyone interested please add your name and your contract number(h/p)

 

 

1> Insaint (Patrick) 91911589

2> ~Yoshiki~ (Aaron) 90888586

3> yag (Aik Yong) 93662778 > Can help pick a good spot to park?

4> quikslvr (Mr Green) 81834404

5> ragnaphobia(Alfian) 93860643 > CONFIRM WILL GO. EAGER TO SEE THE CUSTOM PAINTWORK APRILIA

6> ethan_seahz (Ethan) 91540990

7> Wawanaprilia (96501260 ) - Im a newbie ok ! Hoping to meet u guys ! thanks!!!!!!!!!!!!!1

[lacrimosae]

Post removed.

[YoShiKi1605198827]

FOREIGN APRILIAN MEETUP NIGHT (OPERATION CHICKEN)

JUNE 27 2008

 

 

Event will be in Geylang area> 232 Geylang Road Lorong 10 Singapore 389292,

to chill out and kopi session with our foreign guests.

 

 

Timing to meet > 11:30 PM of june 27

Geylang Lorong 10 (2nd Line Mobile)

 

 

Anyone interested please add your name and your contract number(h/p)

 

 

1> Insaint (Patrick) 91911589

2> ~Yoshiki~ (Aaron) 90888586

3> yag (Aik Yong) 93662778 > Can help pick a good spot to park?

4> quikslvr (Mr Green) 81834404

5> ragnaphobia(Alfian) 93860643 > CONFIRM WILL GO. EAGER TO SEE THE CUSTOM PAINTWORK APRILIA

6> ethan_seahz (Ethan) 91540990

7>Wawanaprilia (96501260 ) - Im a newbie ok ! Hoping to meet u guys ! thanks!!!!!!!!!!!!!

8>

9>

10>

 

To be added on list . . .

all are welcome . . . its more of a gathering session for everybody . . . those coming just add in your name and H/P for easy contact . . .

[YoShiKi1605198827]

When your valve is broken, it will be physically identified by the separate pieces when removed from the exhaust port.

 

If you're lazy, the symptoms would be lack of power above 9,000rpm, and rpm hovers at 9,500 instead of climbing steadily to 11,500rpm.

 

The water seeps into the starter motor from the mating point at the top of the starter motor cover to the engine casing, not the bottom, hence covering the unit itself wont work. Drilling a hole at the bottom of the cover is a temporary fix. Water will still get seep in, this time more prevalent since there is a gaping hole at the bottom, but it can drain out after a while. This is NOT a permanent solution.

 

Change the s.motor cover and seals.

 

Again, the best solution is to do away with the starter motor altogether. Installing the kickstarter will cost u no more than S$200.

 

Khoa,

180kph is clocked by a car or onboard speedometer?

My bike's 10yrs old but still runs 30km/litre and clocks 190kph based on the onboard speedo. However, only 170kph if measured next to a car.

 

yoz bro didn't heard from u in a very long while liao . . . hows ur job now? btw if fixing in the kick starter is really less then $200 I am more than interested bro . . . hahahahaha . . . .

[lacrimosae]

how to know weather your valve is broken? the valve u toking abt is the high end 8k rpm power valve? how to noe it is broken? wad's the signs when riding it?

 

and thanks lacro...no budget for a whole engine though...thanks for the info...think i wan to use a mineral water bottle cut it into a cup like thingy and mount it to cover the starter motor...hope it will work...

 

When your valve is broken, it will be physically identified by the separate pieces when removed from the exhaust port.

 

If you're lazy, the symptoms would be lack of power above 9,000rpm, and rpm hovers at 9,500 instead of climbing steadily to 11,500rpm.

 

The water seeps into the starter motor from the mating point at the top of the starter motor cover to the engine casing, not the bottom, hence covering the unit itself wont work. Drilling a hole at the bottom of the cover is a temporary fix. Water will still get seep in, this time more prevalent since there is a gaping hole at the bottom, but it can drain out after a while. This is NOT a permanent solution.

 

Change the s.motor cover and seals.

 

Again, the best solution is to do away with the starter motor altogether. Installing the kickstarter will cost u no more than S$200.

 

Khoa,

180kph is clocked by a car or onboard speedometer?

My bike's 10yrs old but still runs 30km/litre and clocks 190kph based on the onboard speedo. However, only 170kph if measured next to a car.

[lacrimosae]

yoz bro didn't heard from u in a very long while liao . . . hows ur job now? btw if fixing in the kick starter is really less then $200 I am more than interested bro . . . hahahahaha . . . .

 

Job's ok... I only have about 8 days in SG per month. Most of the time am overseas. No time to touch my bike. Anyway, no one comes for my DIY sessions despite plenty of advance notice, so quite obvious the kids here all too pampered, not used to light labour and getting hands dirty. Which is fine, since most youths quite guniang. Run 2km also can die. haha... I dont want anyone dying at my DIY session after removing 1 valve. Surely got plenty of paperwork to write.

 

You want Oakleys? Can buy them cheaper from the US.

 

Of course its cheap to install the kickstarter. I think most mechs will charge $150-180 for opening the engine case to fit it in. Our engines already have the port prefabricated. Just need to cut through that hole.

[YoShiKi1605198827]

Job's ok... I only have about 8 days in SG per month. Most of the time am overseas. No time to touch my bike. Anyway, no one comes for my DIY sessions despite plenty of advance notice, so quite obvious the kids here all too pampered, not used to light labour and getting hands dirty. Which is fine, since most youths quite guniang. Run 2km also can die. haha... I dont want anyone dying at my DIY session after removing 1 valve. Surely got plenty of paperwork to write.

 

You want Oakleys? Can buy them cheaper from the US.

 

Of course its cheap to install the kickstarter. I think most mechs will charge $150-180 for opening the engine case to fit it in. Our engines already have the port prefabricated. Just need to cut through that hole.

 

 

hahahahaha bro u joker menz . . . . anyway I ever heard from edwin that we need to change a few other stuff not just fit in the kickstarter leh? maybe have to check with him again liao . . . hahahaha . . . . Oakleys I have 3 pairs liao I also didn't wear often . . . . hahahaha I think no need lah . . . . thanks for the offer bro . . .

[lacrimosae]

hahahahaha bro u joker menz . . . . anyway I ever heard from edwin that we need to change a few other stuff not just fit in the kickstarter leh? maybe have to check with him again liao . . . hahahaha . . . . Oakleys I have 3 pairs liao I also didn't wear often . . . . hahahaha I think no need lah . . . . thanks for the offer bro . . .

 

Yeah, labour shld be under S$200. The kickstarer set can buy from UK or Germany. About 150Euros. U probably shld talk to Edwin abt it.

 

Going to sleep soon. Got flight tom.

 

Catch up soon.

[YoShiKi1605198827]

Yeah, labour shld be under S$200. The kickstarer set can buy from UK or Germany. About 150Euros. U probably shld talk to Edwin abt it.

 

Going to sleep soon. Got flight tom.

 

Catch up soon.

 

ok bro u take care . . . just check the part list for rx125 which have the same engine (rotax 122) with the kickstarter unit . . . may be I check with Mah pte ltd to see if they have and if the whole assembly for the kickstarter unit expensive or not . . . will keep u update if u r interested too . . . .