Aprilia Riders

[fibre]

ive sent you a pm

 

cheers

[dannis]

U tried to go scrapyard check if can buy one there? How much u willing to offer for the valve? Maybe if u post here, someone might just offer u one.... If I go scrapyard, I try to ask around for u.... cause my working place is nearby onli.

[dannis]

Alan...............This Sunday track how? Who is going? What time? Meet where? Is it RM80 for 3 hr session?

 

Thanks for bringing me to get my suit.... really good price.... those who like 2 piece suit to prevent BBQ-ed on the way back after PG can consider this IZ-Z 2piece armoured suit selling at slightly less than $500.

 

Tonight outing dont travel too much lah..... less than 200km can? I running on super fuel consumption temporary now.... 13km/l......

 

Who knows how much a RS125 front shock cost.... 2nd hand which is super good or after market shocks which is affordable..... except olins.... maybe less than 3k..... pls msg me to provide me with info at 90214262.

[dannis]

I just bought my clutch from Idel.... S$90 for 6 piece.... those who wants to change clutch can consider this shop. Vertax piston for RS125 03 engine : $174 with piston rings... (this piston get the "53-98" size to have a good fit for the block.. the rings are thinner than the original)

 

I m selling away these items :

 

1) 16 n 17 front n 39 rear sprockets with size 520 DID O ring chain which has been onli 2 mths old.... $ back gurantee they r good condition.

 

2) RS125 original piston which is in good condition but might need to change the rings if ur mech is like mine.... little bit also cannot.

 

Offer me a price n i will just sell it if reasonable. Msg me at 90214262

[MaTrIx87]

any1 got rs end can up for sales?

[jinhanz]

Originally posted by dannis@Mar 10 2006, 09:13 PM

I just bought my clutch from Idel.... S$90 for 6 piece.... those who wants to change clutch can consider this shop. Vertax piston for RS125 03 engine : $174 with piston rings... (this piston get the "53-98" size to have a good fit for the block.. the rings are thinner than the original)

 

I m selling away these items :

 

1) 16 n 17 front n 39 rear sprockets with size 520 DID O ring chain which has been onli 2 mths old.... $ back gurantee they r good condition.

 

2) RS125 original piston which is in good condition but might need to change the rings if ur mech is like mine.... little bit also cannot.

 

Offer me a price n i will just sell it if reasonable. Msg me at 90214262

6 clutch plates for $90?

[alanhim]

Originally posted by dannis@Mar 10 2006, 10:01 PM

Alan...............This Sunday track how? Who is going? What time? Meet where? Is it RM80 for 3 hr session?

 

Thanks for bringing me to get my suit.... really good price.... those who like 2 piece suit to prevent BBQ-ed on the way back after PG can consider this IZ-Z 2piece armoured suit selling at slightly less than $500.

 

Tonight outing dont travel too much lah..... less than 200km can? I running on super fuel consumption temporary now.... 13km/l......

 

Who knows how much a RS125 front shock cost.... 2nd hand which is super good or after market shocks which is affordable..... except olins.... maybe less than 3k..... pls msg me to provide me with info at 90214262.

No problem men. Meet at same place lor at 8am. Price is $80RM for three hours + $5 enterance fee(Only track day have to Pay. Don't ask me why I also don't know. haha).

[alanhim]

guys...

time for track day...

PG TRACK DAY 12th March

Entrance fee $5 (regardless you got play track or not)

3hrs for RM80

10am - 1pm

at 12 noon got 5 lap race for under 400 and 600 and above

Meet up white card house at 8.00am . Moving off time will be 8.30am Sharp!

Pls put your name & HP number if you want to go.

 

1)wacko

2)spiderman (auto add)

3)Alan

4)Kenny

5)Dannis

6)Wan

 

PS. For those who not sure about the charges, this is how it calculate. Entrance $5. If you're not play track you just pay $5 and that it! If you're playing track, it will be 3 hrs for $80 + $5 entrance fee. So total is $85 for those playing track.

 

Anyone else going? Pls put your name down. Thanks.

[myxilplix]

Originally posted by _wacko_@Mar 10 2006, 03:30 PM

axxis- expect to pay around 400++ for the tyres.. JR stock up on metzelers tyres..

if u wanna go for even higher profile.. try the pirellis supercorsas....

aprilia racing in the sepang cup mostly using the tyres..

but the smallest they have is for rear is 160/60..

most tyre have the size for our front..

120/70 or 110/70

good luck on ur wedding my bro..

I was looking at the metzs too. The best combination i could find for our tire sizes was a sportec rear and racetec front. Not quite comfy with the idea of different compounds though. The guy at JR advises getting from their retailers as they can offer discounts whereas JR sells at listed prices. But it's still going to be a pretty penny compared to $220 for a set of GPR70s from ah boy or hkl.

 

wacko what sizes are you using? i'm running 120/70 front and 160/60 rear.

[Sub Zero]

Originally posted by fibre@Mar 10 2006, 08:24 PM

Dear vik,

 

I heard u have been stocking up on powervalves huh. First u bought from benguin, and now u wanna take from cruz, even though chin kwan has kindly asked him to reserve it for me.

 

Ive been running on a broken valve for a month already. and there you are, buying up all the valves for dono-wat reasons. When I asked if you wanted to sell your valve which benguin sold u, you said u wanted to keep it as spare. I said I didn't mind paying you for a profit, but you just wouldn't sell it. Fine.

 

Then how you're trying to buy another one, while here I am with a broken valve, but I can't get any. What the hell are you trying to achieve? Was it because I didn't let you sell my bike the other time?

 

:angry: :angry:

Dear Alex,

 

Firstly get your motherfu*king facts straight. Yes, i did ask Cruz to reserve a valve for me.. But i did not know that Chinguan asked Cruz to reserve for you. Cruz did not tell me anything you fu*king idiot. He told me that I was the first one he spoke to about selling his parts when he spoke to me via MSN 2 nights ago. I just called Chinguan before posting this, and he told me Cruz already told him abt this last week. So what does this show? Cruz just trying to sell his parts to the highest buyer and he doesnt give a damn about anything else. He lied to me. How am i supposed to know?

 

You study NUS right? You got any fu*king brains, you should have called me and asked me about this instead of posting on forum. You call yourself a friend? You didnt even get your fu*king facts straight and you come and shoot me like this. Thanks alot.

 

You didnt offer any competition when i wanted the valve from benguin, so why complain now? And yes, so what if I am planning to stock up on valves? Hey, you fu*king remember when i told you why i dont want to sell you?? Coz i dont want to make a fu"king profit off of you.. I even told you i dont mind lending you.. But i wanted to keep it as a spare for myself. Why you never mention all this?

 

Oh ya, and is it my fu*king problem that you have a broken valve? Why the fu*k do you care if i buy up all the valves? My fu*king money, i spend it how i see fit.. It has nothing to do with you or your fuc*king bike so why bother talking about that?

 

You know something? I'll buy the fu*king valve from Cruz la.. Jus to spite you. I'll make him an offer he cant refuse. If he does refuse, i'll threaten to fu*k up the rest of his sales. You fu*king talking like no other valve in Spore. Go buy from Mah, Ideal, First Motor etc la. They dont have meh? Is there a powervalve shortage in Spore?

 

No point in saying this now la. You wont believe me. But the only reason i told Cruz i wanted the valve was for YOU. He lied and i told me that i was the 1st person that he telling about this, so i thought of you and offered him to take the valve. For you.. I swear upon myself and my bike la. I will die if this is a lie. God can kill me if i am lying about this... And you fu*king jump the gun and get all upset and post online without even calling me? I your next door neighbour ah? Not your friend ah?

 

From now on, dont bother about me and i'll f*k care about you ok. You've showed what you really think of me now. Thanks alot. If you ever need any help, dont ever expect it from me.. Dont talk to me, dont see me. I would have kicked your ass for doubting me like this.

[Sub Zero]

Hey Alex,

 

Upon further clarification with Chinguan, it seems that he did not reserve the valve at all!! Chinguan asked Cruz for the valve, who told that he was selling it to me!!

 

You fu*king misunderstand again.. Fu*k you la..

 

 

PS If anyone want to make fun of this, i will kick your ass.. Pls dun test my patience, Alex decided to make it public and screw up our forum, so let it be this way..

 

Alex, open a new thread la.. why dont you?

[fibre]

Originally posted by Sub Zero@Mar 11 2006, 12:13 AM

Dear Alex,

 

Bablabla

First and foremost, I've clarified with him. Turns out that I've misinterpreted what he said and got my facts wrong. Before I say anything else, I'm sorry and I apologize for it.

 

Second, you're right, it's your money, you can buy anything you want with it. I did mention that you didn't want to sell me for a profit.

 

Third, yes, there is a powervalve shortage in the used market.

 

But are the vulgarities (f**k, motherf**er) and personal insults (idiot, brains, nus) needed?

[marzocchi]

hi sorry to disturb u guys..anyone knows where can i get 2nd hand RS125 brake pump? i just want the brake pump, without caliper and brake rotor. anyone knows where i can get for reasonable price? any scrapyards? thanks!!

[Sub Zero]

Originally posted by fibre@Mar 11 2006, 12:38 AM

First and foremost, I've clarified with him. Turns out that I've misinterpreted what he said and got my facts wrong. Before I say anything else, I'm sorry and I apologize for it.

 

Second, you're right, it's your money, you can buy anything you want with it. I did mention that you didn't want to sell me for a profit.

 

Third, yes, there is a powervalve shortage in the used market.

 

But are the vulgarities (f**k, motherf**er) and personal insults (idiot, brains, nus) needed?

Fu*k you and your sorry la.. Sorry no cure..

 

So what if there is a shortage in the USED market? Buy new one la.. You so desperate for valve right?

 

You asking whether the personal insults and vulgarities neccessary? I'll give you 2 fu*king reasons why they are..

 

1. Coz they are there to emphasize how fu*king strongly i feel about you treating me like this.

 

2. The same way you felt the need to rush online and post without even bothering to call me and ask, i felt it was ok to post online without worrying about whether i should sound nice. Both done without thinking..

 

Lastly, fu*k you again la.. I regret standing up for you when some other idiot try to make trouble for you online.. And you do this to me? Thanx again, "friend'!

[Benguin46]

vik.. chill chill.. this is the first time i see u getting so pissed.. jus chill.. after all.. its only a pathetic piece of valve.. got valve or no valve so wat? bike can run can already.. not like mine yall shld be happy already.. CHILL OUT YALL!!!

[cruz]

Originally posted by eyz@Mar 10 2006, 12:29 PM

oh i got tis shot taken during the meet up.. thou not all the bikes are captured in the shoot..

 

http://img350.imageshack.us/img350/5636/dsc000076tx.jpg

wo wo..cool now guys..chill out..yo dude this is the first time im seeing my indian bro gettin pissed off..im just making business with u guys..vick ask for the valve and that was true. my dude eyz also ask for the valve..i really dont know its for who...i got no care in wat ever he does to the valves..whether he gonna keep it in is show case also i dont care..

ok lets do this..this monday im scrapping out my aprilia..

the parts that i have...

wait there is troube with the first one..the valves u both ppl decide..i dont wanna interfere..its goin for the price of $50...either one of u have to let it go..because both of u are my best buddies..i am selling the parts for a cheapest price..i treat u all like my brothers..and i dont want to have troubles..i dont want to be fickle minded..hope both of u ppl neve bring me to that situations..things i have::::

 

valve-$50

gearbox-$220

block-$150

34 dellorto carb-$120

swing arm-$150

 

these are the few things that im gonna sell it off firstly...still got alot of stuffs to sell..

if u guys need anything urgently just give me a call to my jb number at

+60167585327 or 81936337 spore number

 

plz take care...ride safely..aprilianz rulz wait..if u ppl on the forum not happy with the price that i gave..u all still can call me personnally..maybe u all can ask for a good price..bye bye for now..

[fibre]

Originally posted by Sub Zero@Mar 11 2006, 01:20 AM

Fu*k you and your sorry la.. Sorry no cure..

I'd be inhuman if i said that u did not help me out(effort-wise) on the online idiot incident. Well, thanks for that.

 

Let me tell you why my perception of you have changed into some money minded person, especially after you got into this bike selling business.

 

And after I decided not to sell the bike , but after I declined your proposal, you no longer wanted to lend it to me, nor sell it to me.

 

Then now I heard (wrongly, i admit) that you're buying another one. That plus the impression that you've given me from the bike selling saga, makes me wonder what are u trying to achieve.

 

Swearing to god or whatever is by no means the truth. For example, thiefs swear they didn't steal. Would you believe them? But it might be the truth too. It doesnt matter now.

 

Since you have only vulgarities and "Sorry no cure", we'll go our seperate ways then.

 

This will be my last reply towards this matter.

 

---------------------------------------------

Okay, i think the part about thiefs seemed to give the wrong message. What Im saying is just an example to illustrate how swears are unreliable as I've heard so many of them before. I was just trying to draw an analogy. However, I never thought of viknesh as a theif, in fact he's never stolen anything wat....Im terribly sorry if ive given the wrong idea...

[speedkills]

chill it guys... end it here ok?

 

anyway, one look at me, you know i am happy...why? because my bike is so darn cheap....its so darn fun.....

 

so again, i say... sell your bike....join the dark side

 

 

 

ok... no puns intended!

[speedkills]

guys.... later today, kenny , myself and jasmine are going to visit some farms in Lim chu kang... gonna look at fishes, dogs, iguanas...anyone wanna tag along can give jasmine a call. hahaha can call me too la.. but after 12nn ok? hahaha

 

gonna slp now... nites... er...morning...

[skazuz]

Originally posted by skazuz@Mar 10 2006, 04:55 AM

Got evo helmet for sale.. its a replica of arai ram 3..Ah-boy selling for 160..

i'm selling for 140.. got 2 colours black n white...

 

condition: brand new

colours : black or white

price $140

 

Arai mx-3 size s..

conditions 9 out 0f 10

price $380

 

Brembo single piston caliper

cond: 9 out of 10

price $150

 

 

Sony memory card 2GB(high speed outside selling for 400 plus..) can check market as this is not the normal one..its the HIGH SPEED..so when u play ur psp not lagging..

Price 300..

cond: brand new unopen..

 

Arai helmet bag...outside selling 75-80

Price $55

cond: brand new

stock.: got alot..

 

PLastic protector for MOST HP..outside 18-20( mine's a grade "A"quality plastic)

price: $15

 

 

pics are uploaded at... http://photobucket.com/albums/f77/skazuz/

 

 

 

i share a hp shop wif my cousin so if u guys wanna buy,sell,trade in,repair hp..

buy,sell,repair,mod psp,ps2,x-box.

buy,sell i-pod electronics stuff

buy memory card

install software.. e.g: games,video clips, mp3,pictures..antivirus,etc...

 

All of you are welcome..

 

can gimme a call or msg me at 91020851

upz

[jinhanz]

flame again. hahaha. by the way vik most of the flame here seems to involve u. dunno y. u are too short tempered lahz. relax. y get piss off over every single thing. misunderstanding can be clear but losing a friend is not worth it especially when its a misunderstanding, and i guess u know how irritated u will feel when u have a broken valve. i know how it feels and certanity it doesn`t feel good. i am not on any side but i certanity feel this is juz a small matter and alex has taken the first step to clear up and apologize. u need not go further as to post something liddat. perhaps the panda suit has make u more hot tempered(juz for laugh) aiyah. cruz ur the main problem lahz. i will help u all solve the problem. cruz i buy ur valve lahz. hahahaha

 

samuel happy with ur new bike rite. hahaha not like aprilia. ride until u scard already.

[wacko]

I was looking at the metzs too. The best combination i could find for our tire sizes was a sportec rear and racetec front. Not quite comfy with the idea of different compounds though. The guy at JR advises getting from their retailers as they can offer discounts whereas JR sells at listed prices. But it's still going to be a pretty penny compared to $220 for a set of GPR70s from ah boy or hkl.

well..

rennsports do too have our sizes for rear 150/60 as stated at their websites but not sure whether JR bring them in as the demand is not there..

if u want..

u can try the combination of rennsport front and racetecs rerar..

buyt have to use 160/60 for rear..

ah boy also got metzzies for sale..

try asking them then share the info here..

might be interested,,

[Benguin46]

Originally posted by speedkills@Mar 11 2006, 06:01 AM

guys.... later today, kenny , myself and jasmine are going to visit some farms in Lim chu kang... gonna look at fishes, dogs, iguanas...anyone wanna tag along can give jasmine a call. hahaha can call me too la.. but after 12nn ok? hahaha

 

gonna slp now... nites... er...morning...

iguanas? those monitor lizards look alike? count me out man.. haha!

[xxes123]

Originally posted by jinhanz@Mar 11 2006, 09:28 AM

flame again. hahaha. by the way vik most of the flame here seems to involve u. dunno y. u are too short tempered lahz. relax. y get piss off over every single thing. misunderstanding can be clear but losing a friend is not worth it especially when its a misunderstanding, and i guess u know how irritated u will feel when u have a broken valve. i know how it feels and certanity it doesn`t feel good. i am not on any side but i certanity feel this is juz a small matter and alex has taken the first step to clear up and apologize. u need not go further as to post something liddat. perhaps the panda suit has make u more hot tempered(juz for laugh) aiyah. cruz ur the main problem lahz. i will help u all solve the problem. cruz i buy ur valve lahz. hahahaha

 

samuel happy with ur new bike rite. hahaha not like aprilia. ride until u scard already.

 

missed some good show... come come have some

when is the next fibre VS Carrot part2

 

 

lah... tonite kopi ok....

[jazzyme]

aye? i'm still here? sh*t.. was supposed to meet samuel like NOW..

 

anyone else wanna go pet viewing?