[Group] SBF Yamaha X1

[gunshead]

check out new input into spark z 110 cc

 

http://www.singaporebikes.com/forums/showthread.php/172785-Group-SBF-Yamaha-Spark-Z-amp-X?p=8036718#post8036718

[B3aR]

Hi, I have a 2nd magnetic/pulsar coil for sale.

Interested pls pm me thanks.

[superbikeracer]

Hi..urgently selling cheap....x1 yamaha with clutch.10/2015 .coe newewable.engine & outlook good.just lay up.buyer need change footrest and inspection.iu not working.no time do this n that and sell high price...selling nett $1088. Call me @ 90750551

[ashiff]

Hi anyone selling Yamaha supreme x1 stock front disk brake and caliper, stock footrest call me 98755536

[didi19]

Anyone the price for overhaul?

 

Sent from my GT-I8150 using Tapatalk 2

[oldskool_audio]

Anyone the price for overhaul?

 

Sent from my GT-I8150 using Tapatalk 2

 

New piston, new original block head, new valve plus man power is around $480. 4stroke is expensive. Take good care of the engine by not over rev it. Cruise 80kmh is acceptable for x1.

 

 

Sent from my iPhone using Tapatalk - now Free

[hadisons]

looking for complete set of X1 footrest..brake n gear lever..

contact @ 90750551

[e-flavstar]

New piston, new original block head, new valve plus man power is around $480. 4stroke is expensive. Take good care of the engine by not over rev it. Cruise 80kmh is acceptable for x1.

 

 

Sent from my iPhone using Tapatalk - now Free

 

do you guys get heavy vibrations when travelling at 100km on highway?

currently having this problem. btw which bike shop u get the $480 quotation from?

[osmanpauzan]

bro..

jb cheap..

spend $300SGD overhaul

do you guys get heavy vibrations when travelling at 100km on highway?

currently having this problem. btw which bike shop u get the $480 quotation from?

[e-flavstar]

bro..

jb cheap..

spend $300SGD overhaul

 

johore can trust? all original parts?

[e-flavstar]

I heard alot of stories example Lorong bapok there. Alot of bike gets more problem after doing there

 

Sent from my GT-I9505 using Tapatalk

[fabianau]

Hi guys. Anyone what might be the cause of very loud engine noise and leaks at oil filter area?

 

Sent from my GT-I9300 using Tapatalk

[e-flavstar]

Hi guys. Anyone what might be the cause of very loud engine noise and leaks at oil filter area?

 

Sent from my GT-I9300 using Tapatalk

 

piston knocking or conrod already shaking?

[fabianau]

Oh found out that it was a cracked header that caused above mentioned issue. Thanks anyway.

 

Sent from my GT-I9300 using Tapatalk

[sujak]

Guys, don't be lazy and be fooled by those bike shops. If you want to overhaul, you need to decide whether u wanna do top or full overhaul. Get the parts yourself and pay for labour only. I would recommend buying from United Impex along Roswell rd. Then go to bikewerks or planet to get it fix

I bought original block, piston, piston ring and gaskets for $90 and labour $40.. 2years and bike still going strong..

[sujak]

Anyway, I intend to go in JB to do some servicing on X1. Anybody wanna join.. looking at either 14 or 16 Dec...

[sujak]

BTW, we already have a wa group for x1. You can pm me your contacts and I'll ask the mod aka president to add you guys..

[e-flavstar]

Hi there. Anyone knows x1 rim is similar to what bike? Same as wave 125?

 

Sent from my GT-I9505 using Tapatalk

[e-flavstar]

Or any cub bike with Rear disc brakes?

 

Sent from my GT-I9505 using Tapatalk

[sujak]

Guys, don't be lazy and be fooled by those bike shops. If you want to overhaul, you need to decide whether u wanna do top or full overhaul. Get the parts yourself and pay for labour only. I would recommend buying from United Impex along Roswell rd. Then go to bikewerks or planet to get it fix

I bought original block, piston, piston ring and gaskets for $90 and labour $40.. 2years and bike still going strong..

 

After 3 years, bike died along TPE. Attempts to revive it failed. Decided to send to the nearest workshop and was quoted $80 for labour in overhauling my bike again. I'm doing top overhaul only. These are the breakdowns..

 

- $80 Labour (Pasir Ris SPC... not recommended coz labour is very high.. )

- clean and serviced carb

- valve clearance

- grind off carbon buildup in combustion chamber

 

 

- Rebore my stock original block from Size 1 to Size 1.25 ( $12, done at Perak Rd)

- Bought New Piston and Piston Rings ( not original, but aftermarket one from Japan ) $26

- Bought overhaul gasket and seals ($12)

- Bought Exhaust and Intake Bars ($24.... in the combustion chamber)

 

Total damage is about $150...

 

Parts bought from United Motors Impex at Rowell Road.

[Maman72]

Where can i get a 2nd IU? Any info given much appreciate. North area prefer.. Thks

[Maman72]

Newbie on cub here. My X1 wen start i need to warm up abt 5min den e engine wont die during idling. But wen i start n move out immediately the engine stalled. Any idea wats wrong n wat i need to repair or change?

[cyanide27]

I'm thinking of selling my April 2017 X1 for 1.6k. Wanted to keep it as a spare bike but feels like a huge waste cos its a reliable machine. PM me if ur keen. Cheers!

 

Sent from my GT-I9300 using Tapatalk 2

[Maman72]

Where can i get a scrap caberator for X1? 1 of my caberator screw for the air n oil adjustment worn out already.

[gunshead]

http://www.singaporebikes.com/forums/showthread.php/172785-Group-SBF-Yamaha-Spark-Z-amp-X/page11